Atomic layer deposition(ALD), a chemical vapor deposition technique based on sequential self-terminating gas–solid reactions, has for about four decades been applied for manufacturing conformal inorganic material layers with thickness down to the nanometer range. Despite the numerous successful applications of material growth by ALD, many physicochemical processes that control ALD growth are not yet sufficiently understood. To increase understanding of ALD processes, overviews are needed not only of the existing ALD processes and their applications, but also of the knowledge of the surface chemistry of specific ALD processes. This work aims to start the overviews on specific ALD processes by reviewing the experimental information available on the surface chemistry of the trimethylaluminum/water process. This process is generally known as a rather ideal ALD process, and plenty of information is available on its surface chemistry. This in-depth summary of the surface chemistry of one representative ALD process aims also to provide a view on the current status of understanding the surface chemistry of ALD, in general. The review starts by describing the basic characteristics of ALD, discussing the history of ALD—including the question who made the first ALD experiments—and giving an overview of the two-reactant ALD processes investigated to date. Second, the basic concepts related to the surface chemistry of ALD are described from a generic viewpoint applicable to all ALD processes based on compound reactants. This description includes physicochemical requirements for self-terminating reactions,reaction kinetics, typical chemisorption mechanisms, factors causing saturation, reasons for growth of less than a monolayer per cycle, effect of the temperature and number of cycles on the growth per cycle (GPC), and the growth mode. A comparison is made of three models available for estimating the sterically allowed value of GPC in ALD. Third, the experimental information on the surface chemistry in the trimethylaluminum/water ALD process are reviewed using the concepts developed in the second part of this review. The results are reviewed critically, with an aim to combine the information obtained in different types of investigations, such as growth experiments on flat substrates and reaction chemistry investigation on high-surface-area materials. Although the surface chemistry of the trimethylaluminum/water ALD process is rather well understood, systematic investigations of the reaction kinetics and the growth mode on different substrates are still missing. The last part of the review is devoted to discussing issues which may hamper surface chemistry investigations of ALD, such as problematic historical assumptions, nonstandard terminology, and the effect of experimental conditions on the surface chemistry of ALD. I hope that this review can help the newcomer get acquainted with the exciting and challenging field of surface chemistry of ALD and can serve as a useful guide for the specialist towards the fifth decade of ALD research.

Surface chemistry of atomic layer deposition: A case study for the trimethylaluminum/water process

An object is to provide a semiconductor device of which a manufacturing process is not complicated and by which cost can be suppressed, by forming a thin film transistor using an oxide semiconductor film typified by zinc oxide, and a manufacturing method thereof. For the semiconductor device, a gate electrode is formed over a substrate; a gate insulating film is formed covering the gate electrode; an oxide semiconductor film is formed over the gate insulating film; and a first conductive film and a second conductive film are formed over the oxide semiconductor film. The oxide semiconductor film has at least a crystallized region in a channel region.

Semiconductor device, and manufacturing method thereof

Al2O3 films were deposited by atomic layer deposition (ALD) at temperatures as low as 33 °C in a viscous-flow reactor using alternating exposures of Al(CH3)3 (trimethylaluminum [TMA]) and H2O. Low-temperature Al2O3 ALD films have the potential to coat thermally fragile substrates such as organic, polymeric, or biological materials. The properties of low-temperature Al2O3 ALD films were investigated versus growth temperature by depositing films on Si(100) substrates and quartz crystal microbalance (QCM) sensors. Al2O3 film thicknesses, growth rates, densities, and optical properties were determined using surface profilometry, atomic force microscopy (AFM), QCM, and spectroscopic ellipsometry. Al2O3 film densities were lower at lower deposition temperatures. Al2O3 ALD film densities were 3.0 g/cm3 at 177 °C and 2.5 g/cm3 at 33 °C. AFM images showed that Al2O3 ALD films grown at low temperatures were very smooth with a root-mean-squared (RMS) roughness of only 4 ± 1 A. Current−voltage and capacitance−voltage...

Low-Temperature Al2O3 Atomic Layer Deposition

Atomic layer deposition (ALD): from precursors to thin film structures

Atomic layer deposition (ALD) is gaining attention as a thin film deposition method, uniquely suitable for depositing uniform and conformal films on complex three-dimensional topographies. The deposition of a film of a given material by ALD relies on the successive, separated, and self-terminating gas–solid reactions of typically two gaseous reactants. Hundreds of ALD chemistries have been found for depositing a variety of materials during the past decades, mostly for inorganic materials but lately also for organic and inorganic–organic hybrid compounds. One factor that often dictates the properties of ALD films in actual applications is the crystallinity of the grown film: Is the material amorphous or, if it is crystalline, which phase(s) is (are) present. In this thematic review, we first describe the basics of ALD, summarize the two-reactant ALD processes to grow inorganic materials developed to-date, updating the information of an earlier review on ALD [R. L. Puurunen, J. Appl. Phys. 97, 121301 (2005)], and give an overview of the status of processing ternary compounds by ALD. We then proceed to analyze the published experimental data for information on the crystallinity and phase of inorganic materials deposited by ALD from different reactants at different temperatures. The data are collected for films in their as-deposited state and tabulated for easy reference. Case studies are presented to illustrate the effect of different process parameters on crystallinity for representative materials: aluminium oxide, zirconium oxide, zinc oxide, titanium nitride, zinc zulfide, and ruthenium. Finally, we discuss the general trends in the development of film crystallinity as function of ALD process parameters. The authors hope that this review will help newcomers to ALD to familiarize themselves with the complex world of crystalline ALD films and, at the same time, serve for the expert as a handbook-type reference source on ALD processes and film crystallinity.

Crystallinity of inorganic films grown by atomic layer deposition: Overview and general trends

Effect of water dose on the atomic layer deposition rate of oxide thin films

Methods are provided for depositing silicon dioxide containing thin films on a substrate by atomic layer deposition ALD. By using disilane compounds as the silicon source, good deposition rates and uniformity are obtained.

Silicon Dioxide Thin Films by ALD

Influence of atomic layer deposition parameters on the phase content of Ta2O5 films

Methods are provided for selectively depositing a material on a first metal or metallic surface of a substrate relative to a second, dielectric surface of the substrate, or for selectively depositing metal oxides on a first metal oxide surface of a substrate relative to a second silicon oxide surface. The selectively deposited material can be, for example, a metal, metal oxide, metal nitride, metal silicide, metal carbide and/or dielectric material. In some embodiments a substrate comprising a first metal or metallic surface and a second dielectric surface is alternately and sequentially contacted with a first vapor-phase metal halide reactant and a second reactant. In some embodiments a substrate comprising a first metal oxide surface and a second silicon oxide surface is alternately and sequentially contacted with a first vapor phase metal fluoride or chloride reactant and water.

Raija Matero

Papers

Effect of water dose on the atomic layer deposition rate of oxide thin films

Silicon Dioxide Thin Films by ALD

Influence of atomic layer deposition parameters on the phase content of Ta2O5 films

Selective deposition on metal or metallic surfaces relative to dielectric surfaces

Introducing atomic layer epitaxy for the deposition of optical thin films