Crystalline metal-organic frameworks (MOFs) are formed by reticular synthesis, which creates strong bonds between inorganic and organic units. Careful selection of MOF constituents can yield crystals of ultrahigh porosity and high thermal and chemical stability. These characteristics allow the interior of MOFs to be chemically altered for use in gas separation, gas storage, and catalysis, among other applications. The precision commonly exercised in their chemical modification and the ability to expand their metrics without changing the underlying topology have not been achieved with other solids. MOFs whose chemical composition and shape of building units can be multiply varied within a particular structure already exist and may lead to materials that offer a synergistic combination of properties.

The Chemistry and Applications of Metal-Organic Frameworks

New materials hold the key to fundamental advances in energy conversion and storage, both of which are vital in order to meet the challenge of global warming and the finite nature of fossil fuels. Nanomaterials in particular offer unique properties or combinations of properties as electrodes and electrolytes in a range of energy devices. This review describes some recent developments in the discovery of nanoelectrolytes and nanoelectrodes for lithium batteries, fuel cells and supercapacitors. The advantages and disadvantages of the nanoscale in materials design for such devices are highlighted.

https://img62.chem17.com/1/20140715/635410323829886334962.pdf

Nanostructured materials for advanced energy conversion and storage devices

Adsorptive separation is very important in industry. Generally, the process uses porous solid materials such as zeolites, activated carbons, or silica gels as adsorbents. With an ever increasing need for a more efficient, energy-saving, and environmentally benign procedure for gas separation, adsorbents with tailored structures and tunable surface properties must be found. Metal–organic frameworks (MOFs), constructed by metal-containing nodes connected by organic bridges, are such a new type of porous materials. They are promising candidates as adsorbents for gas separations due to their large surface areas, adjustable pore sizes and controllable properties, as well as acceptable thermal stability. This critical review starts with a brief introduction to gas separation and purification based on selective adsorption, followed by a review of gas selective adsorption in rigid and flexible MOFs. Based on possible mechanisms, selective adsorptions observed in MOFs are classified, and primary relationships between adsorption properties and framework features are analyzed. As a specific example of tailor-made MOFs, mesh-adjustable molecular sieves are emphasized and the underlying working mechanism elucidated. In addition to the experimental aspect, theoretical investigations from adsorption equilibrium to diffusion dynamics via molecular simulations are also briefly reviewed. Furthermore, gas separations in MOFs, including the molecular sieving effect, kinetic separation, the quantum sieving effect for H2/D2 separation, and MOF-based membranes are also summarized (227 references).

Selective gas adsorption and separation in metal–organic frameworks

Metal–Organic Frameworks for Separations

Kenji Sumida, David L. Rogow, Jarad A. Mason, Thomas M. McDonald, Eric D. Bloch, Zoey R. Herm, Tae-Hyun Bae, Jeffrey R. Long

Carbon Dioxide Capture in Metal–Organic Frameworks

Adsorbents and adsorption isotherms equilibrium adsorption of gas mixtures rate processes in adsorbers adsorber dynamics - bed profiles and breakthrough curves cyclic gas separation processes pressure-swing adsorption - principles and processes pressure-swing adsorption - models and experiments.

Gas Separation by Adsorption Processes

Preface. 1. Introductory Remarks. 2. Fundamental Factors for Designing Adsorbent. 3. Sorbent Selection: Equilibrium Isotherms, Diffusion, Cyclic Processes, and Sorbent Selection Criteria. 4. Pore Size Distribution. 5. Activated Carbon. 6. Silica Gel, MCM, and Activated Alumina. 7. Zeolites and Molecular Sieves. 8. &pi -Complexation Sorbents and Applications. 9. Carbon Nanotubes, Pillared Clays, and Polymeric Resins. 10. Sorbents for Applications. Author Index. Subject Index.

/pdf/adsorbents-fundamentals-and-applications-2732spmgdj.pdf

Adsorbents: Fundamentals and Applications

A series of manganese-cerium oxide catalysts were prepared by co-precipitation method and used for low temperature selective catalytic reduction (SCR) of NO x with ammonia in the presence of excess O 2 . These catalysts were characterized by X-ray diffraction (XRD), surface area measurement and FTIR. The experimental results showed that the best Mn-Ce mixed-oxide catalyst yielded 95% NO conversion at 150 °C at a space velocity of 42,000 h −1 . As the manganese content was increased from 0 to 40% (i.e. the molar ratio of Mn/(Mn+Ce)), NO conversion increased significantly, but decreased at higher manganese contents. The most active catalyst was obtained with a molar Mn/(Mn+Ce) ratio of 0.4. Only N 2 rather than N 2 O was found in the product when the temperature was below 150 °C. At higher temperatures, trace amounts of N 2 O were detected. A mechanistic pathway for this reaction was proposed based on earlier findings and FTIR results obtained in this work. The initial step was the adsorption of NH 3 on Lewis acid sites of catalyst, followed by reaction with nitrite species to produce N 2 and H 2 O. Possible intermediates are proposed and all the intermediates could transform into NH 2 NO, which could further react to produce N 2 and H 2 O.

MnOx-CeO2 mixed oxides prepared by co-precipitation for selective catalytic reduction of NO with NH3 at low temperatures

Deep desulfurization of transportation fuels (gasoline, diesel, and jet fuels) is being mandated by U.S. and foreign governments and is also needed for future fuel cell applications. However, it is extremely difficult and costly to achieve with current technology, which requires catalytic reactors operated at high pressure and temperature. We show that Cu+ and Ag+ zeolite Y can adsorb sulfur compounds from commercial fuels selectively and with high sulfur capacities (by π complexation) at ambient temperature and pressure. Thus, the sulfur content was reduced from 430 to

https://science.sciencemag.org/content/sci/301/5629/79.full.pdf

Ralph T. Yang

Papers

Gas Separation by Adsorption Processes

Adsorbents: Fundamentals and Applications

MnOx-CeO2 mixed oxides prepared by co-precipitation for selective catalytic reduction of NO with NH3 at low temperatures

Desulfurization of Transportation Fuels with Zeolites Under Ambient Conditions

Carbon nanotubes as superior sorbent for dioxin removal.