MnOx-CeO2 mixed oxides prepared by co-precipitation for selective catalytic reduction of NO with NH3 at low temperatures

TLDR: In this paper, a series of manganese-cerium oxide catalysts were prepared by co-precipitation method and used for low temperature selective catalytic reduction of NO x with ammonia in the presence of excess O 2.

Abstract: A series of manganese-cerium oxide catalysts were prepared by co-precipitation method and used for low temperature selective catalytic reduction (SCR) of NO x with ammonia in the presence of excess O 2 . These catalysts were characterized by X-ray diffraction (XRD), surface area measurement and FTIR. The experimental results showed that the best Mn-Ce mixed-oxide catalyst yielded 95% NO conversion at 150 °C at a space velocity of 42,000 h −1 . As the manganese content was increased from 0 to 40% (i.e. the molar ratio of Mn/(Mn+Ce)), NO conversion increased significantly, but decreased at higher manganese contents. The most active catalyst was obtained with a molar Mn/(Mn+Ce) ratio of 0.4. Only N 2 rather than N 2 O was found in the product when the temperature was below 150 °C. At higher temperatures, trace amounts of N 2 O were detected. A mechanistic pathway for this reaction was proposed based on earlier findings and FTIR results obtained in this work. The initial step was the adsorption of NH 3 on Lewis acid sites of catalyst, followed by reaction with nitrite species to produce N 2 and H 2 O. Possible intermediates are proposed and all the intermediates could transform into NH 2 NO, which could further react to produce N 2 and H 2 O.