关于Semigroups of Linear Operators and Applications to Partial Differential Equations的两个注解

基礎講座 電気泳動(Electrophoresis)

This chapter introduces the finite element method (FEM) as a tool for solution of classical electromagnetic problems. Although we discuss the main points in the application of the finite element method to electromagnetic design, including formulation and implementation, those who seek deeper understanding of the finite element method should consult some of the works listed in the bibliography section.

Introduction to the Finite Element Method

The etch rates for 317 combinations of 16 materials (single-crystal silicon, doped, and undoped polysilicon, several types of silicon dioxide, stoichiometric and silicon-rich silicon nitride, aluminum, tungsten, titanium, Ti/W alloy, and two brands of positive photoresist) used in the fabrication of microelectromechanical systems and integrated circuits in 28 wet, plasma, and plasmaless-gas-phase etches (several HF solutions, H/sub 3/PO/sub 4/, HNO/sub 3/+H/sub 2/O+NH/sub 4/F, KOH, Type A aluminum etchant, H/sub 2/O+H/sub 2/O/sub 2/+HF, H/sub 2/O/sub 2/, piranha, acetone, HF vapor, XeF/sub 2/, and various combinations of SF/sub 6/, CF/sub 4/, CHF/sub 3/, Cl/sub 2/, O/sub 2/, N/sub 2/, and He in plasmas) were measured and are tabulated. Etch preparation, use, and chemical reactions (from the technical literature) are given. Sample preparation and MEMS applications are described for the materials.

/pdf/etch-rates-for-micromachining-processing-29z80ltijs.pdf

Etch rates for micromachining processing

Any device which senses information such as shape, texture, softness, temperature, vibration or shear and normal forces, by physical contact or touch, can be termed a tactile sensor. The importance of tactile sensor technology was recognized in the 1980s, along with a realization of the importance of computers and robotics. Despite this awareness, tactile sensors failed to be strongly adopted in industrial or consumer markets. In this paper, previous expectations of tactile sensors have been reviewed and the reasons for their failure to meet these expectations are discussed. The evolution of different tactile transduction principles, state of art designs and fabrication methods, and their pros and cons, are analyzed. From current development trends, new application areas for tactile sensors have been proposed. Literature from the last few decades has been revisited, and areas which are not appropriate for the use of tactile sensors have been identified. Similarly, the challenges that this technology needs to overcome in order to find its place in the market have been highlighted.

/pdf/a-review-of-tactile-sensing-technologies-with-applications-12ul5smpoy.pdf

A review of tactile sensing technologies with applications in biomedical engineering

Natural frequencies of rectangular plates using characteristic orthogonal polynomials in rayleigh-ritz method

In this paper, a method for continuous flow separation of circulating malignant cells from blood in a microfluidic device using dielectrophoresis is discussed. Separation of MDA231 breast cancer cells after mixing with normal blood cells was achieved with a level of accuracy that enabled precise counting of the malignant cells, separation and eventually, sub-culturing. MDA231 cells were separated from the blood to a daughter channel using two pairs of interdigitated activated comb-like electrode structures. All experiments are performed with conductivity adjusted medium samples. The electrode pairs were positioned divergent and convergent with respect to the flow. The AC signals used in the separation are 20 V peak-to-peak with frequencies of 10-50 kHz. The separation is based on balance of magnitude of the dielectrophoretic force and hydrodynamic force. The difference in response between circulating malignant cells and normal cells at a certain band of alternating current frequencies was used for rapid separation of cancer cells from blood. The significance of these experimental results is discussed in this paper, with detailed reporting on the suspension medium, preparation of cells, flow condition and the fabrication process of the microfluidic chip. The present technique could potentially be applied to identify incident cancer at a stage and size that is not yet detectable by standard diagnostic techniques (imaging and biochemical testing). Alternatively, it may also be used to detect cancer recurrences.

Interdigitated comb-like electrodes for continuous separation of malignant cells from blood using dielectrophoresis.

Transverse vibrations of a rotating uniform cantilever beam with tip mass as predicted by using beam characteristic orthogonal polynomials in the Rayleigh-Ritz method

Flexural vibration of polygonal plates using characteristic orthogonal polynomials in two variables

Tip-growing cells have the unique property of invading living tissues and abiotic growth matrices. To do so, they exert significant penetrative forces. In plant and fungal cells, these forces are generated by the hydrostatic turgor pressure. Using the TipChip, a microfluidic lab-on-a-chip device developed for tip-growing cells, we tested the ability to exert penetrative forces generated in pollen tubes, the fastest-growing plant cells. The tubes were guided to grow through microscopic gaps made of elastic polydimethylsiloxane material. Based on the deformation of the gaps, the force exerted by the elongating tubes to permit passage was determined using finite element methods. The data revealed that increasing mechanical impedance was met by the pollen tubes through modulation of the cell wall compliance and, thus, a change in the force acting on the obstacle. Tubes that successfully passed a narrow gap frequently burst, raising questions about the sperm discharge mechanism in the flowering plants.

https://www.pnas.org/content/pnas/110/20/8093.full.pdf

Rama B. Bhat

Papers

Natural frequencies of rectangular plates using characteristic orthogonal polynomials in rayleigh-ritz method

Interdigitated comb-like electrodes for continuous separation of malignant cells from blood using dielectrophoresis.

Transverse vibrations of a rotating uniform cantilever beam with tip mass as predicted by using beam characteristic orthogonal polynomials in the Rayleigh-Ritz method

Flexural vibration of polygonal plates using characteristic orthogonal polynomials in two variables

Quantification of cellular penetrative forces using lab-on-a-chip technology and finite element modeling