Resonant plasmonic and metamaterial structures allow for control of fundamental optical processes such as absorption, emission and refraction at the nanoscale. Considerable recent research has focused on energy absorption processes, and plasmonic nanostructures have been shown to enhance the performance of photovoltaic and thermophotovoltaic cells. Although reducing metallic losses is a widely sought goal in nanophotonics, the design of nanostructured 'black' super absorbers from materials comprising only lossless dielectric materials and highly reflective noble metals represents a new research direction. Here we demonstrate an ultrathin (260 nm) plasmonic super absorber consisting of a metal–insulator–metal stack with a nanostructured top silver film composed of crossed trapezoidal arrays. Our super absorber yields broadband and polarization-independent resonant light absorption over the entire visible spectrum (400–700 nm) with an average measured absorption of 0.71 and simulated absorption of 0.85. Proposed nanostructured absorbers open a path to realize ultrathin black metamaterials based on resonant absorption.

/pdf/broadband-polarization-independent-resonant-light-absorption-15labulryh.pdf

Broadband polarization-independent resonant light absorption using ultrathin plasmonic super absorbers

Anti-reflective coatings (ARCs) have evolved into highly effective reflectance and glare reducing components for various optical and opto-electrical equipments. Extensive research in optical and biological reflectance minimization as well as the emergence of nanotechnology over the years has contributed to the enhancement of ARCs in a major way. In this study the prime objective is to give a comprehensive idea of the ARCs right from their inception, as they were originally conceptualized by the pioneers and lay down the basic concepts and strategies adopted to minimize reflectance. The different types of ARCs are also described in greater detail and the state-of-the-art fabrication techniques have been fully illustrated. The inspiration that ARCs derive from nature (‘biomimetics’) has been an area of major research and is discussed at length. The various materials that have been reportedly used in fabricating the ARCs have also been brought into sharp focus. An account of application of ARCs on solar cells and modules, contemporary research and associated challenges are presented in the end to facilitate a universal understanding of the ARCs and encourage future research.

Anti-reflective coatings: A critical, in-depth review

This paper reviews a new field of direct femtosecond laser surface nano/microstructuring and its applications. Over the past few years, direct femtosecond laser surface processing has distinguished itself from other conventional laser ablation methods and become one of the best ways to create surface structures at nano- and micro-scales on metals and semiconductors due to its flexibility, simplicity, and controllability in creating various types of nano/microstructures that are suitable for a wide range of applications. Significant advancements were made recently in applying this technique to altering optical properties of metals and semiconductors. As a result, highly absorptive metals and semiconductors were created, dubbed as the “black metals” and “black silicon”. Furthermore, various colors other than black have been created through structural coloring on metals. Direct femtosecond laser processing is also capable of producing novel materials with wetting properties ranging from superhydrophilic to superhydrophobic. In the extreme case, superwicking materials were created that can make liquids run vertically uphill against the gravity over an extended surface area. Though impressive scientific achievements have been made so far, direct femtosecond laser processing is still a young research field and many exciting findings are expected to emerge on its horizon.

Direct femtosecond laser surface nano/microstructuring and its applications

We report a hierarchically branched TiO2 nanorod structure that serves as a model architecture for efficient photoelectrochemical devices as it simultaneously offers a large contact area with the electrolyte, excellent light-trapping characteristics, and a highly conductive pathway for charge carrier collection. Under Xenon lamp illumination (UV spectrum matched to AM 1.5G, 88 mW/cm2 total power density), the branched TiO2 nanorod array produces a photocurrent density of 0.83 mA/cm2 at 0.8 V versus reversible hydrogen electrode (RHE). The incident photon-to-current conversion efficiency reaches 67% at 380 nm with an applied bias of 0.6 V versus RHE, nearly two times higher than the bare nanorods without branches. The branches improve efficiency by means of (i) improved charge separation and transport within the branches due to their small diameters, and (ii) a 4-fold increase in surface area which facilitates the hole transfer at the TiO2/electrolyte interface.

Branched TiO2 Nanorods for Photoelectrochemical Hydrogen Production

Optical reflection, or in other words the loss of reflection, from a surface becomes increasingly crucial in determining the extent of the light-matter interaction. The simplest example of using an anti-reflecting (AR) surface is possibly the solar cell that incorporates an AR coating to harvest sunlight more effectively. Researchers have now found ways to mimic biological structures, such as moth eyes or cicada wings, which have been used for the AR purpose by nature herself. These nanoscopic biomimetic structures lend valuable clues in fabricating and designing gradient refractive index materials that are efficient AR structures. The reflectance from a selected sub-wavelength or gradient index structures have come down to below 1% in the visible region of the spectrum and efforts are on to achieve broader bands of such enhanced AR regime. In addition to the challenge of broader bands, the performance of AR structures is also limited by factors such as omnidirectional properties and polarization of incident light. This review presents selected state-of-the-art AR techniques, reported over the last half a century, and their guiding principles to predict a logical trend for future research in this field.

Anti-reflecting and photonic nanostructures

We increased the absorptance of light by silicon to approximately 90% from the near ultraviolet (0.25 μm) to the near infrared (2.5 μm) by surface microstructuring using laser-chemical etching. The remarkable absorptance most likely comes from a high density of impurities and structural defects in the silicon lattice, enhanced by surface texturing. Microstructured avalanche photodiodes show significant enhancement of below-band-gap photocurrent generation at 1.06 and 1.31 μm, indicating promise for use in infrared photodetectors.

Near-unity below-band-gap absorption by microstructured silicon

A processing technique using femtosecond laser pulses to microstructure the surface of a silicon avalanche photodiode (APD) has been used to enhance its near-infrared (near-IR) response. Experiments were performed on a series of APDs and APD arrays using various structuring parameters and poststructuring annealing sequences. Following thermal annealing, we were able to fabricate APD arrays with quantum efficiencies as high as 58% at 1064 nm without degradation of their noise or gain performance. Experimental results provided evidence to suggest that the improvement in charge collection is a result of increased absorption in the near-IR.

Enhancing near-infrared avalanche photodiode performance by femtosecond laser microstructuring

We will present research on the development of an optical receiver module with a wide frequency bandwidth and excellent response to near-infrared radiation. This module is being produced to promote new imaging modalities, allowing retinal specialist to utilize established diagnostic instruments, such as scanning laser ophthalmoscopes (SLO) in a unique or more effective manner. In particular, it can be applied towards more accurate visual threshold studies in both the healthy and diseased eye. With this goal in mind, measurements of the targeted receiver's performance with
and without additional amplification are presented, as is a survey of available APD detectors.

Richard Farrell

Papers

Near-unity below-band-gap absorption by microstructured silicon

Enhancing near-infrared avalanche photodiode performance by femtosecond laser microstructuring

Near Infrared Receiver for Advanced Ophthalmology