TiO 2 photocatalysis is widely used in a variety of applications and products in the environmental and energy fields, including self-cleaning surfaces, air and water purification systems, sterilization, hydrogen evolution, and photoelectrochemical conversion. The development of new materials, however, is strongly required to provide enhanced performances with respect to the photocatalytic properties and to find new uses for TiO 2 photocatalysis. In this review, recent developments in the area of TiO 2 photocatalysis research, in terms of new materials from a structural design perspective, have been summarized. The dimensionality associated with the structure of a TiO 2 material can affect its properties and functions, including its photocatalytic performance, and also more specifically its surface area, adsorption, reflectance, adhesion, and carrier transportation properties. We provide a brief introduction to the current situation in TiO 2 photocatalysis, and describe structurally controlled TiO 2 photocatalysts which can be classified into zero-, one-, two-, and three-dimensional structures. Furthermore, novel applications of TiO 2 surfaces for the fabrication of wettability patterns and for printing are discussed.

TiO2 photocatalysis: Design and applications

Note from the Series Editor. Foreword. Preface. Acknowledgments. Chapter 1: Introduction. 1.1 Electric Propulsion Background. 1.2 Electric Thruster Types. 1.3 Ion Thruster Geometry. 1.4 Hall Thruster Geometry. 1.5 Beam/Plume Characteristics. References. Chapter 2: Thruster Principles. 2.1 The Rocket Equation. 2.2 Force Transfer in Ion and Hall Thrusters. 2.3 Thrust. 2.4 Specific Impulse. 2.5 Thruster Efficiency. 2.6 Power Dissipation. 2.7 Neutral Densities and Ingestion in Electric Thrusters. References. Problems. Chapter 3: Basic Plasma Physics. 3.1 Introduction. 3.2 Maxwell's Equations. 3.3 Single Particle Motions. 3.4 particle Energies and Velocities. 3.5 Plasma as a Fluid. 3.6 Diffusion in Partially Ionized Gases. 3.7 Sheaths at the Boundaries of Plasmas. References. Problems. Chapter 4: Ion Thruster Plasma Generators. 4.1 Introduction. 4.2 Idealized Ion Thruster Plasma Generator. 4.3 DC Discharge Ion Thruster. 4.4 Kaufman Ion Thrusters. 4.5 rf Ion Thrusters. 4.6 Microwave Ion Thrusters. 4.7 2-D Computer Models of the Ion Thruster Discharge Chamber. References. Problems. Chapter 5: Ion Thruster Accelerator Grids. 5.1 Grid Configurations. 5.2 Ion Accelerator Basics. 5.3 Ion Optics. 5.4 Electron Backstreaming. 5.5 High-Voltage Considerations. 5.6 Ion Accelerator Grid Life. References. Problems. Chapter 6: Hollow Cathodes. 6.1 Introduction. 6.2 Cathode Configurations. 6.3 Thermionic Electron Emitter Characteristics. 6.4 Insert Region Plasma. 6.5 Orifice Region Plasma. 6.6 Hollow cathode Thermal Models. 6.7 Cathode Plume-Region Plasma. 6.8 Hollow Cathode Life. 6.9 Keeper Wear and Life. 6.10 Hollow Cathode Operation. References. Problems. Chapter 7: Hall Thrusters. 7.1 Introduction. 7.2 Thruster Operating Principles and Scaling. 7.3 Hall Thruster Performance Models. 7.4 Channel Physics and Numerical Modeling. 7.5 Hall Thruster Life. References. Problems. Chapter 8: Ion and Hall Thruster Plumes. 8.1 Introduction. 8.2 Plume Physics. 8.3 Plume Models. 8.4 Spacecraft Interactions. 8.5 Interactions with Payloads. References. Problems. Chapter 9: Flight Ion and Hall Thrusters. 9.1 Introduction. 9.2 Ion Thrusters. 9.3 Hall Thrusters. References. Appendices. A: Nomenclature. B: Gas Flow Unit Conversions and Cathode Pressure Estimates. C: Energy Loss by Electrons. D: Ionization and Excitation Cross Sections for Xenon. E: Ionization and Excitation Reaction Rates for Xenon in Maxwellian Plasmas. F: Electron Relaxation and Thermalization Times. G: Clausing Factor Monte Carlo Calculation. Index..

/pdf/fundamentals-of-electric-propulsion-ion-and-hall-thrusters-4zwus65dx4.pdf

Fundamentals of electric propulsion : ion and Hall thrusters

This paper summarizes recent research dealing with development of titanium dioxide (TiO2) used for environmental applications. TiO2 plays the most important role owing to its excellent chemical and physical properties. However, the TiO2 band edge lies in the UV region that makes them inactive under visible irradiation. In this regard, considerable efforts have been made to increase the visible light activity of TiO2 via the modification of its electronic and optical properties. Doping TiO2 using either anions or cations is one of the typical approaches that has been largely applied. Coupling TiO2 with a narrow bad gap semiconductor (MxOy/TiO2 or MxSy/TiO2) represents another approach. This work aims to encompass the new progress of TiO2 for an efficient application in water and wastewater treatment under visible light, emphasizes the future trends of TiO2 in the environment, and suggests new research directions, including preparation aspects for the development of this promising material.

Modified TiO2 For Environmental Photocatalytic Applications: A Review

Electron transmission through molecules and molecular interfaces has been a subject of intensive research due to recent interest in electron-transfer phenomena underlying the operation of the scanning-tunneling microscope on one hand, and in the transmission properties of molecular bridges between conducting leads on the other. In these processes, the traditional molecular view of electron transfer between donor and acceptor species gives rise to a novel view of the molecule as a current-carrying conductor, and observables such as electron-transfer rates and yields are replaced by the conductivities, or more generally by current-voltage relationships, in molecular junctions. Such investigations of electrical junctions, in which single molecules or small molecular assemblies operate as conductors, constitute a major part of the active field of molecular electronics. In this article I review the current knowledge and understanding of this field, with particular emphasis on theoretical issues. Different approaches to computing the conduction properties of molecules and molecular assemblies are reviewed, and the relationships between them are discussed. Following a detailed discussion of static-junctions models, a review of our current understanding of the role played by inelastic processes, dephasing and thermal-relaxation effects is provided. The most important molecular environment for electron transfer and transmission is water, and our current theoretical understanding of electron transmission through water layers is reviewed. Finally, a brief discussion of overbarrier transmission, exemplified by photoemission through adsorbed molecular layers or low-energy electron transmission through such layers, is provided. Similarities and differences between the different systems studied are discussed.

http://atto.tau.ac.il/~nitzan/anrev-published.pdf

Electron transmission through molecules and molecular interfaces

Edible films and coatings are thin layers of edible materials applied on food products that play an important role on their conservation, distribution and marketing. Some of their functions are to protect the product from mechanical damage, physical, chemical and microbiological activities. Their use in food applications and especially highly perishable products such as horticultural ones, is based on some particular properties such as cost, availability, functional attributes, mechanical properties (flexibility, tension), optical properties (brightness and opacity), the barrier effect against gases flow, structural resistance to water and microorganisms and sensory acceptability. In this piece of work, the lastest advances on their composition (polymers to be used in the structural matrix), including nanoparticles addition, and properties have been reviewed, as well as the trends in the research about their different applications, including oil consumption reduction in deep-fat fried products, their use in combination with bioactive compounds that bring foodstuff additional functions and shelf life extension of highly perishable products.

Edible films and coatings: Structures, active functions and trends in their use

Sol-gel synthesis of Ag-loaded TiO2-ZnO thin films with enhanced photocatalytic activity

Optical and morphological characterization of photocatalytic TiO2 thin films doped with silver

We present a method for determining the thermal diffusivity in opaque solids by means of an analysis of the photoacoustic phase signal at low modulation frequencies using the open-cell photoacoustic technique. We show for f⩽(π/2)2fc, where fc is the modulation frequency at which the thermal diffusion length matches the sample thickness, the photoacoustic phase signal can be written in linear form with the modulation frequency f. Then, obtaining the proportionality coefficient by fitting the experimental data, the thermal diffusivity of the sample can be determined. The advantage of this method is that it is realized in a range of modulation frequencies below those normally used, hence, the photoacoustic signal should be alone attributed to the mechanism of thermal diffusion. Moreover, the signal-to-noise ratio will be more reliable. This method was tested in some samples and it is also shown to be important in solids with high diffusivity values and thin materials.

https://www.repositoriodigital.ipn.mx/bitstream/123456789/10815/1/1998%20JAP%20v84%20p6327.pdf

Method for measurement of the thermal diffusivity in solids: Application to metals, semiconductors, and thin materials

Effect of ZnSe doping on the photochromic and thermochromic properties of MoO3 thin films

The influence of a cadmium selenide (CdSe) layer on the thermochromic and photochromic properties of molybdenum trioxide (MoO3) thin films was studied. The films were deposited on glass substrates ...

S. A. Tomás

Papers

Sol-gel synthesis of Ag-loaded TiO2-ZnO thin films with enhanced photocatalytic activity

Optical and morphological characterization of photocatalytic TiO2 thin films doped with silver

Method for measurement of the thermal diffusivity in solids: Application to metals, semiconductors, and thin materials

Effect of ZnSe doping on the photochromic and thermochromic properties of MoO3 thin films

Effect of a CdSe Layer on the Thermo- and Photochromic Properties of MoO3 Thin Films Deposited by Physical Vapor Deposition