This article presents a historical review of the research carried out on dielectric resonator antennas (DRAs) over the last three decades. Major research activities in each decade are highlighted. The current state of the art of dielectric-resonator-antenna technology is then reviewed. The achievable performance of dielectric resonator antennas designed for compactness, wide impedance bandwidth, low profiles, circular polarization, or high gain are illustrated. The latest developments in dielectric-resonator-antenna arrays and fabrication techniques are also examined.

Dielectric Resonator Antennas: A Historical Review and the Current State of the Art

This paper summarizes the technical activities of the Task Force on Power System Dynamic State and Parameter Estimation. This Task Force was established by the IEEE Working Group on State Estimation Algorithms to investigate the added benefits of dynamic state and parameter estimation for the enhancement of the reliability, security, and resilience of electric power systems. The motivations and engineering values of dynamic state estimation (DSE) are discussed in detail. Then, a set of potential applications that will rely on DSE is presented and discussed. Furthermore, a unified framework is proposed to clarify the important concepts related to DSE, forecasting-aided state estimation, tracking state estimation, and static state estimation. An overview of the current progress in DSE and dynamic parameter estimation is provided. The paper also provides future research needs and directions for the power engineering community.

/pdf/power-system-dynamic-state-estimation-motivations-lul365qej6.pdf

Power System Dynamic State Estimation: Motivations, Definitions, Methodologies, and Future Work

This paper develops a robust iterated extended Kalman filter (EKF) based on the generalized maximum likelihood approach (termed GM-IEKF) for estimating power system state dynamics when subjected to disturbances. The proposed GM-IEKF dynamic state estimator is able to track system transients in a faster and more reliable way than the conventional EKF and the unscented Kalman filter (UKF) thanks to its batch-mode regression form and its robustness to innovation and observation outliers, even in position of leverage. Innovation outliers may be caused by impulsive noise in the dynamic state model while observation outliers may be due to large biases, cyber attacks, or temporary loss of communication links of PMUs. Good robustness and high statistical efficiency under Gaussian noise are achieved via the minimization of the Huber convex cost function of the standardized residuals. The latter is weighted via a function of robust distances of the two-time sequence of the predicted state and innovation vectors and calculated by means of the projection statistics. The state estimation error covariance matrix is derived using the total influence function, resulting in a robust state prediction in the next time step. Simulation results carried out on the IEEE 39-bus test system demonstrate the good performance of the GM-IEKF under Gaussian and non-Gaussian process and observation noise.

A Robust Iterated Extended Kalman Filter for Power System Dynamic State Estimation

A new numerical stochastic optimization algorithm, inspired from colonizing weeds, is proposed for Electromagnetic applications. This algorithm, invasive weed optimization (IWO), is described and applied to different electromagnetic problems. The linear array antenna synthesis, the standard problem used by antenna engineers, is presented as an example for the application of the IWO. Compared to the PSO, The features of the IWO are shown. As another application, the design of aperiodic thinned array antennas by optimizing the number of elements and at the same time their positions is presented. By implementing this new scenario, thinned arrays with less number of elements and lower sidelobes, compared to the results achieved by genetic algorithm (GA) for the same aperture dimensions, are obtained. Finally, the IWO is applied to a U-slot patch antenna to have the desired dual-band characteristics.

Invasive Weed Optimization and its Features in Electromagnetics

The advancement in wireless communications requires the integration of multiple radios into a single platform to maximize connectivity. In this paper, the design process of reconfigurable antennas is discussed. Reconfigurable antennas are proposed to cover different wireless services that operate over a wide frequency range. They show significant promise in addressing new system requirements. They exhibit the ability to modify their geometries and behavior to adapt to changes in surrounding conditions. Reconfigurable antennas can deliver the same throughput as a multiantenna system. They use dynamically variable and adaptable single-antenna geometry without increasing the real estate required to accommodate multiple antennas. The optimization of reconfigurable antenna design and operation by removing unnecessary redundant switches to alleviate biasing issues and improve the system's performance is discussed. Controlling the antenna reconfiguration by software, using Field Programmable Gate Arrays (FPGAs) or microcontrollers is introduced herein. The use of Neural Networks and its integration with graph models on programmable platforms and its effect on the operation of reconfigurable antennas is presented. Finally, the applications of reconfigurable antennas for cognitive radio, Multiple Input Multiple Output (MIMO) channels, and space applications are highlighted.

Reconfigurable Antennas: Design and Applications

A frequency reconfigurable microstrip patch antenna is presented. It is found that the incorporation of a U-slot in the patch can provide a flat input resistance and a linear input reactance across a wider bandwidth than the conventional patch antenna. By placing a variable capacitor and an inductor at the antenna input, the impedance matching frequency of the antenna can be varied. The fabricated prototype antenna attains a tunable frequency range from 2.6 to 3.35 GHz. The proposed antenna is simple in structure, and the control circuitry is placed underneath the ground plane. It is suitable for use in reducing the crosstalk from adjacent channels in multichannel system.

Frequency Reconfigurable U-Slot Microstrip Patch Antenna

The performance of single feed truncated corner circularly polarized microstrip antennas with different substrate thickness is studied by simulation and experiment. It is found that the axial ratio bandwidth could be enhanced considerably when a thicker substrate is used, provided that a U-slot and/or L-probe is used to effect impedance matching. One of the configurations attains an axial ratio bandwidth (< 3 dB) of about 14% within the impedance matching band when the substrate thickness is about 0.2λo.

/pdf/design-and-study-of-wideband-single-feed-circularly-2m6f22kzu3.pdf

Design and Study of Wideband Single Feed Circularly Polarized Microstrip Antennas

A wide band patch antenna fed by an L-probe can be designed for dual- and multi-band application by cutting U-slots on the patch. Simulation and measurement results are presented to illustrate this design.

Dual- and Multiband U-Slot Patch Antennas

Power system model quality is key to safe and reliable electricity delivery. A novel method using disturbance data recorded by phasor measurement units (PMUs) is proposed to improve the integrity of dynamic models, which consists of both model validation and model parameter identification. In the model validation step, event playback is applied to simulate the model's response for a rigorous comparison with measured response captured by PMUs. A large mismatch indicates model deficiency. In the parameter identification step, an automatic calibration method using the extended Kalman filter (EKF) techniques and trajectory sensitivity analysis is formulated to save significant effort and time from manual tuning. Case studies are presented to demonstrate that the proposed method has adequate performance for model validation and parameter calibration in terms of accuracy, good convergence speed and robustness with respect to measurement noises. The proposed method is cost-effective and complements traditional equipment testing for improving dynamic model quality.

Generator dynamic model validation and parameter calibration using phasor measurements at the point of connection

A wideband circularly polarized (CP) L-slot antenna single fed by L-shaped feed line is designed. Wideband CP is obtained by truncating one of the corners of the antenna element. This arrangement introduces orthogonal components with quadrature phase difference to excite circularly polarized wave. A bandwidth of 46.5% (2.18-3.5 GHz) is achieved with an dB and dB. Good agreement between measured and computed results is achieved. Moreover, parametric study results are presented.

S.-L.S. Yang

Papers

Frequency Reconfigurable U-Slot Microstrip Patch Antenna

Design and Study of Wideband Single Feed Circularly Polarized Microstrip Antennas

Dual- and Multiband U-Slot Patch Antennas

Generator dynamic model validation and parameter calibration using phasor measurements at the point of connection

Wideband Circularly Polarized Antenna With L-Shaped Slot