Finite element analysis (FEA) has been used extensively to predict the biomechanical performance of various dental implant designs as well as the effect of clinical factors on implant success. By understanding the basic theory, method, application, and limitations of FEA in implant dentistry, the clinician will be better equipped to interpret results of FEA studies and extrapolate these results to clinical situations. This article reviews the current status of FEA applications in implant dentistry and discusses findings from FEA studies in relation to the bone-implant interface, the implant-prosthesis connection, and multiple-implant prostheses.

/pdf/application-of-finite-element-analysis-in-implant-dentistry-52b1nibbjh.pdf

Application of finite element analysis in implant dentistry: A review of the literature

Acrylic bone cement occupies a distinctive place in the hierarchy of synthetic biomaterials, because it is the only material currently used for anchoring the prosthesis to the contiguous bone in a cemented arthroplasty. However, the cement is not without its drawbacks. The main one is the role that it has been postulated to play in the aseptic loosening and, hence, clinical life of the arthroplasty. In turn, this role is directly related to the mechanical properties of the cement, especially the resistance to fracture of the cement in the mantle at the cement-prosthesis interface or the cement-bone interface. The present work is a detailed critical review of the recent literature on the properties of bone cement that are considered germane to its use in the stated application. The relevant properties are identified and a case is made for including each of them. Compilations of the values of these properties, obtained under clearly identified conditions, are presented for the six commercial formulations of bone cement in current popular orthopedic use. The gaps and unresolved questions in the current data base, efforts that should be made to address these issues, and research directions are covered.

Properties of acrylic bone cement: state of the art review.

Fracture prediction in plastic deformation processes

Various fracture criteria, based on different assumptions and different mechanical models, have been proposed in the past to predict ductile fracture. The objective of this study is to assess their effectiveness and accuracy in a wide range of process parameters. A series of tests on 2024-T351 aluminum alloy, including upsetting tests and tensile tests is carried out. It is found that none of the existing fracture criteria give consistent results. Two totally different fracture mechanisms are clearly observed from microfractographs of upsetting and tensile specimens. This observation confirms that it is impossible to capture all features of ductile crack formation in different stress states with a single criterion. It is shown that different functions are necessary to predict crack formation for different ranges of stress triaxiality. Weighting functions in a wide range of stress states can be obtained by determining the fracture locus in the space of equivalent strain to fracture and stress triaxiality.

A Comparative Study on Various Ductile Crack Formation Criteria

New ductile fracture criterion for prediction of fracture forming limit diagrams of sheet metals

Determination of orthotropic bone elastic constants using FEA and modal analysis

https://purehost.bath.ac.uk/ws/files/164586146/Collected_Marine_Litter_Accepted_Manuscript.pdf

Collected marine litter - A growing waste challenge.

The long-term clinical performance of a dental implant is dependent upon the preservation of good quality bone surrounding the implant and a sound interface between the bone and the biomaterial. Good quality bone is itself dependent upon the appropriate level of bone remodelling necessary to maintain the bone density and the avoidance of bone microfracture and failure. Both processes are governed by the stress and strain distribution in the bone. In this study, a dental implant which had the same geometry as the Branemark system, but with a bioactive surface coating added to produce a direct bond to the bone, was analysed. A finite element stress and strain analysis has been carried out for a range of bone density distributions under axial and lateral loading. The predictions indicated that there was no evidence of strain shielding around the neck of the implant. With lateral loading, high values of von Mises stresses (18 M Pa) were predicted around the neck of the implant. A reduction in the elastic modulus of the bone around the neck of the implant by a factor of 16 only produced a twofold reduction in the peak stress. This resulted in stress levels capable of inducing fatigue failure in this much weaker bone. This analysis has demonstrated that it is extremely important to have good quality dense bone around the neck of the implant to withstand the predicted peak stresses of between 9 and 18 M Pa. Failure to achieve this after implantation and subsequent healing may result in local fatigue failure and resorption at the neck upon resumption of physiological loading.

Sally E Clift

Papers

Fracture prediction in plastic deformation processes

Determination of orthotropic bone elastic constants using FEA and modal analysis

Collected marine litter - A growing waste challenge.

Finite element stress and strain analysis of the bone surrounding a dental implant: effect of variations in bone modulus.

Application of finite elements to the stress analysis of articular cartilage