Advances in wireless technologies, low-power electronics, the internet of things, and in the domain of connected health are driving innovations in wearable medical devices at a tremendous pace. Wearable sensor systems composed of flexible and stretchable materials have the potential to better interface to the human skin, whereas silicon-based electronics are extremely efficient in sensor data processing and transmission. Therefore, flexible and stretchable sensors combined with low-power silicon-based electronics are a viable and efficient approach for medical monitoring. Flexible medical devices designed for monitoring human vital signs, such as body temperature, heart rate, respiration rate, blood pressure, pulse oxygenation, and blood glucose have applications in both fitness monitoring and medical diagnostics. As a review of the latest development in flexible and wearable human vitals sensors, the essential components required for vitals sensors are outlined and discussed here, including the reported sensor systems, sensing mechanisms, sensor fabrication, power, and data processing requirements.

Monitoring of Vital Signs with Flexible and Wearable Medical Devices

In general, Micropower Impulse Radar (MIR) depends on Ultra-Wideband (UWB) transmission systems. UWB technology can supply innovative new systems and products that have an obvious value for radar and communications uses. Important applications include bridge-deck inspection systems, ground penetrating radar, mine detection, and precise distance resolution for such things as liquid level measurement. Most of these UWB inspection and measurement methods have some unique qualities, which need to be pursued. Therefore, in considering changes to Part 15 the FCC needs to take into account the unique features of UWB technology. MIR is applicable to two general types of UWB systems: radar systems and communications systems. Currently LLNL and its licensees are focusing on radar or radar type systems. LLNL is evaluating MIR for specialized communication systems. MIR is a relatively low power technology. Therefore, MIR systems seem to have a low potential for causing harmful interference to other users of the spectrum since the transmitted signal is spread over a wide bandwidth, which results in a relatively low spectral power density.

/pdf/response-to-fcc-98-208-notice-of-inquiry-in-the-matter-of-3attixctl7.pdf

Response to FCC 98-208 notice of inquiry in the matter of revision of part 15 of the commission's rules regarding ultra-wideband transmission systems

Before the emergence of ultra-wideband (UWB) radios, widely used wireless communications were based on sinusoidal carriers, and impulse technologies were employed only in specific applications (e.g. radar). In 2002, the Federal Communication Commission (FCC) allowed unlicensed operation between 3.1–10.6 GHz for UWB communication, using a wideband signal format with a low EIRP level (−41.3dBm/MHz). UWB communication systems then emerged as an alternative to narrowband systems and significant effort in this area has been invested at the regulatory, commercial, and research levels.

IEEE Transactions on Microwave Theory and Techniques and Antennas and Propagation Announce a Joint Special Issue on Ultra-Wideband (UWB) Technology

Technology has become ubiquitous, it is all around us and is becoming part of us. Togetherwith the rise of the Internet of Things (IoT) paradigm and enabling technologies (e.g., Augmented Reality (AR), Cyber-Physical Systems, Artificial Intelligence (AI), blockchain or edge computing), smart wearables and IoT-based garments can potentially have a lot of influence by harmonizing functionality and the delight created by fashion. Thus, smart clothes look for a balance among fashion, engineering, interaction, user experience, cybersecurity, design and science to reinvent technologies that can anticipate needs and desires. Nowadays, the rapid convergence of textile and electronics is enabling the seamless and massive integration of sensors into textiles and the development of conductive yarn. The potential of smart fabrics, which can communicate with smartphones to process biometric information such as heart rate, temperature, breathing, stress, movement, acceleration, or even hormone levels, promises a new era for retail. This article reviews the main requirements for developing smart IoT-enabled garments and shows smart clothing potential impact on business models in the medium-term. Specifically, a global IoT architecture is proposed, the main types and components of smart IoT wearables and garments are presented, their main requirements are analyzed and some of the most recent smart clothing applications are studied. In this way, this article reviews the past and present of smart garments in order to provide guidelines for the future developers of a network where garments will be connected like other IoT objects: the Internet of Smart Clothing.

https://www.mdpi.com/2079-9292/7/12/405/pdf

Towards The Internet of Smart Clothing: A Review on IoT Wearables and Garments for Creating Intelligent Connected E-Textiles

A compact and low-profile wearable antenna is presented for on-body wireless body area network (WBAN) applications. The proposed triangular patch antenna is designed using low-cost widely available vinyl polymer-based flexible substrate. The final antenna topology is obtained by the combination of the Koch fractal geometry, meandering slits, and defected ground structure, to achieve a novel hybrid structure with compact footprint, good structural conformability, and enhanced impedance bandwidth (BW) to operate in the Industrial, Scientific, and Medical band with center frequency at 2.45 GHz. The fabricated prototype of the antenna has shown a good agreement between numerical and experimental results. In comparison to state-of-the-art prototypes, our design has more compact form factor of 0.318λo × 0.318λo × 0.004λo, along with 7.75% impedance BW, a peak gain of 2.06 dBi, and overall radiated efficiency of 75%. For the assessment of a specific absorption rate (SAR) performance of our design, it is tested on realistic heterogeneous HUGO voxel model. Both numerical and experimental investigations revealed extremely good robustness to both human body loading and structural deformation, making it an ideal candidate for flexible and body-worn devices.

A Compact, Low-Profile Fractal Antenna for Wearable On-Body WBAN Applications

A miniaturized wearable antenna, entirely implemented in textile materials, is proposed that relies on a quarter-mode substrate integrated waveguide topology. The design combines compact dimensions with high body-antenna isolation, making it excellently suited for off-body communication in wearable electronics/smart textile applications. The fabricated antenna achieves stable on-body performance. A measured on-body impedance matching bandwidth of 5.1% is obtained, versus 4.8% in free space. The antenna gain equals 3.8 dBi in the on-body and 4.2 dBi for the free-space scenario. High radiation efficiency, measured to be 81% in free space, is combined with a low calculated specific absorption rate of 0.45 mW/g, averaged over 1 g of tissue, with 500 mW input power.

/pdf/wearable-small-and-robust-the-circular-quarter-mode-textile-r8v5gn5fd2.pdf

Wearable, Small, and Robust: The Circular Quarter-Mode Textile Antenna

Smart-fabric interactive-textile systems offer exciting new possibilities, provided that they exhibit sufficient robustness and autonomy to be reliably deployed in critical applications. Textile multiantenna systems, unobtrusively integrated in a professional garment, are key components of such systems, as they set up energy-efficient and stable wireless body-centric communication links. Yet, their functionality may be further extended by exploiting their surface as energy-harvesting platform. Different state-of-the-art energy harvesters are suitable for compact integration onto a textile antenna. We demonstrate this by integrating a power management system, together with multiple diverse scavenging transducers and a storage module, on a well-chosen textile antenna topology. We provide guidelines to ensure that the additional hardware does not affect the textile antenna's performance. Simultaneous scavenging from different energy sources significantly increases the autonomy of a wearable system, in the meanwhile reducing battery size.

Textile Antennas as Hybrid Energy-Harvesting Platforms

A dual-band wearable textile antenna based on substrate integrated waveguide technology is presented for operation in the [2.4-2.4835]-GHz Industrial, Scientific and Medical band and the [2.5-2.69]-GHz 4G LTE band 7. The antenna features an integrated flexible solar harvesting system, consisting of a flexible solar cell, a power management system, and energy storage. All these components are judiciously positioned on the antenna platform in order not to affect its radiation performance. The measured reflection coefficients and radiation characteristics after bending and deploying the antenna on a human body prove that the antenna is well suited for on-body use. A measured on-body antenna gain and radiation efficiency of 5.0 dBi and 89% are realized. Measurements in a real-life situation have demonstrated the ability to scavenge a maximum of 53 mW by means of a single integrated flexible solar cell.

https://biblio.ugent.be/publication/5683239/file/5683246.pdf

Dual-Band Substrate Integrated Waveguide Textile Antenna With Integrated Solar Harvester

A novel wearable radio frequency identification (RFID) tag with sensing, processing, and decision-taking capability is presented for operation in the 2.45-GHz RFID superhigh frequency (SHF) band. The tag is powered by an integrated light harvester, with a flexible battery serving as an energy buffer. The proposed active tag features excellent wearability, very high read range, enhanced functionality, flexible interfacing with diverse low-power sensors, and extended system autonomy through an innovative holistic microwave system design paradigm that takes antenna design into consideration from the very early stages. Specifically, a dedicated textile shorted circular patch antenna with monopolar radiation pattern is designed and optimized for highly efficient and stable operation within the frequency band of operation. In this process, the textile antenna’s functionality is augmented by reusing its surface as an integration platform for light-energy-harvesting, sensing, processing, and transceiver hardware, without sacrificing antenna performance or the wearer’s comfort. The RFID tag is validated by measuring its stand-alone and on-body characteristics in free-space conditions. Moreover, measurements in a real-world scenario demonstrate an indoor read range up to 23 m in nonline-of-sight indoor propagation conditions, enabling interrogation by a reader situated in another room. In addition, the RFID platform only consumes 168.3 $\mu \text{W}$ , when sensing and processing are performed every 60 s.

/pdf/wearable-flexible-lightweight-modular-rfid-tag-with-34avjk5107.pdf

Wearable Flexible Lightweight Modular RFID Tag With Integrated Energy Harvester

A wideband half-mode substrate-integrated-waveguide cavity-backed slot antenna covering all Unlicensed National Information Infrastructure (U-NII) radio bands (5.15-5.85 GHz) is designed, fabricated, and validated. By a half-mode implementation of a multimoded cavity with nonresonant slot, a compact ultrawideband antenna is obtained with very stable radiation characteristics, owing to the excellent antenna/platform isolation. Cork material is applied as antenna substrate, making the proposed antenna suitable for integration into floors or walls. In free-space conditions, an impedance bandwidth of 1.30 GHz (23.7%), a radiation efficiency of 85%, a front-to-back ratio of 15.0 dB, and a maximum gain of 4.3 dBi at 5.50 GHz are measured. Performance is also validated when the antenna is deployed on various dielectric or conducting platforms and underneath different dielectric superstrates. Only the latter slightly detunes the antenna's impedance bandwidth. Yet, the complete frequency band of interest remains covered, owing to additional design margins incorporated in the requirements. Its compactness, unobtrusive integration potential, and stable high performance in different environments make this antenna topology an ideal candidate for Internet of Things applications.

/pdf/half-mode-substrate-integrated-waveguide-cavity-backed-slot-4zvo584mmd.pdf

Sam Lemey

Papers

Wearable, Small, and Robust: The Circular Quarter-Mode Textile Antenna

Textile Antennas as Hybrid Energy-Harvesting Platforms

Dual-Band Substrate Integrated Waveguide Textile Antenna With Integrated Solar Harvester

Wearable Flexible Lightweight Modular RFID Tag With Integrated Energy Harvester

Half-Mode Substrate-Integrated-Waveguide Cavity-Backed Slot Antenna on Cork Substrate