Black carbon aerosol plays a unique and important role in Earth's climate system. Black carbon is a type of carbonaceous material with a unique combination of physical properties. This assessment provides an evaluation of black-carbon climate forcing that is comprehensive in its inclusion of all known and relevant processes and that is quantitative in providing best estimates and uncertainties of the main forcing terms: direct solar absorption; influence on liquid, mixed phase, and ice clouds; and deposition on snow and ice. These effects are calculated with climate models, but when possible, they are evaluated with both microphysical measurements and field observations. Predominant sources are combustion related, namely, fossil fuels for transportation, solid fuels for industrial and residential uses, and open burning of biomass. Total global emissions of black carbon using bottom-up inventory methods are 7500 Gg yr−1 in the year 2000 with an uncertainty range of 2000 to 29000. However, global atmospheric absorption attributable to black carbon is too low in many models and should be increased by a factor of almost 3. After this scaling, the best estimate for the industrial-era (1750 to 2005) direct radiative forcing of atmospheric black carbon is +0.71 W m−2 with 90% uncertainty bounds of (+0.08, +1.27) W m−2. Total direct forcing by all black carbon sources, without subtracting the preindustrial background, is estimated as +0.88 (+0.17, +1.48) W m−2. Direct radiative forcing alone does not capture important rapid adjustment mechanisms. A framework is described and used for quantifying climate forcings, including rapid adjustments. The best estimate of industrial-era climate forcing of black carbon through all forcing mechanisms, including clouds and cryosphere forcing, is +1.1 W m−2 with 90% uncertainty bounds of +0.17 to +2.1 W m−2. Thus, there is a very high probability that black carbon emissions, independent of co-emitted species, have a positive forcing and warm the climate. We estimate that black carbon, with a total climate forcing of +1.1 W m−2, is the second most important human emission in terms of its climate forcing in the present-day atmosphere; only carbon dioxide is estimated to have a greater forcing. Sources that emit black carbon also emit other short-lived species that may either cool or warm climate. Climate forcings from co-emitted species are estimated and used in the framework described herein. When the principal effects of short-lived co-emissions, including cooling agents such as sulfur dioxide, are included in net forcing, energy-related sources (fossil fuel and biofuel) have an industrial-era climate forcing of +0.22 (−0.50 to +1.08) W m−2 during the first year after emission. For a few of these sources, such as diesel engines and possibly residential biofuels, warming is strong enough that eliminating all short-lived emissions from these sources would reduce net climate forcing (i.e., produce cooling). When open burning emissions, which emit high levels of organic matter, are included in the total, the best estimate of net industrial-era climate forcing by all short-lived species from black-carbon-rich sources becomes slightly negative (−0.06 W m−2 with 90% uncertainty bounds of −1.45 to +1.29 W m−2). The uncertainties in net climate forcing from black-carbon-rich sources are substantial, largely due to lack of knowledge about cloud interactions with both black carbon and co-emitted organic carbon. In prioritizing potential black-carbon mitigation actions, non-science factors, such as technical feasibility, costs, policy design, and implementation feasibility play important roles. The major sources of black carbon are presently in different stages with regard to the feasibility for near-term mitigation. This assessment, by evaluating the large number and complexity of the associated physical and radiative processes in black-carbon climate forcing, sets a baseline from which to improve future climate forcing estimates.

/pdf/bounding-the-role-of-black-carbon-in-the-climate-system-a-1fc3novd9r.pdf

Bounding the role of black carbon in the climate system: A scientific assessment

Microbes play key geoactive roles in the biosphere, particularly in the areas of element biotransformations and biogeochemical cycling, metal and mineral transformations, decomposition, bioweathering, and soil and sediment formation. All kinds of microbes, including prokaryotes and eukaryotes and their symbiotic associations with each other and 'higher organisms', can contribute actively to geological phenomena, and central to many such geomicrobial processes are transformations of metals and minerals. Microbes have a variety of properties that can effect changes in metal speciation, toxicity and mobility, as well as mineral formation or mineral dissolution or deterioration. Such mechanisms are important components of natural biogeochemical cycles for metals as well as associated elements in biomass, soil, rocks and minerals, e.g. sulfur and phosphorus, and metalloids, actinides and metal radionuclides. Apart from being important in natural biosphere processes, metal and mineral transformations can have beneficial or detrimental consequences in a human context. Bioremediation is the application of biological systems to the clean-up of organic and inorganic pollution, with bacteria and fungi being the most important organisms for reclamation, immobilization or detoxification of metallic and radionuclide pollutants. Some biominerals or metallic elements deposited by microbes have catalytic and other properties in nanoparticle, crystalline or colloidal forms, and these are relevant to the development of novel biomaterials for technological and antimicrobial purposes. On the negative side, metal and mineral transformations by microbes may result in spoilage and destruction of natural and synthetic materials, rock and mineral-based building materials (e.g. concrete), acid mine drainage and associated metal pollution, biocorrosion of metals, alloys and related substances, and adverse effects on radionuclide speciation, mobility and containment, all with immense social and economic consequences. The ubiquity and importance of microbes in biosphere processes make geomicrobiology one of the most important concepts within microbiology, and one requiring an interdisciplinary approach to define environmental and applied significance and underpin exploitation in biotechnology.

http://dzumenvis.nic.in/Physiology/pdf/Metals,%20minerals%20and%20microbes.pdf

Metals, minerals and microbes: geomicrobiology and bioremediation

. In this study, 121 daily PM2.5 (aerosol particle with aerodynamic diameter less than 2.5 μm) samples were collected from an urban site in Beijing in four months between April 2009 and January 2010 representing the four seasons. The samples were determined for various compositions, including elements, ions, and organic/elemental carbon. Various approaches, such as chemical mass balance, positive matrix factorization (PMF), trajectory clustering, and potential source contribution function (PSCF), were employed for characterizing aerosol speciation, identifying likely sources, and apportioning contributions from each likely source. Our results have shown distinctive seasonality for various aerosol speciations associated with PM2.5 in Beijing. Soil dust waxes in the spring and wanes in the summer. Regarding the secondary aerosol components, inorganic and organic species may behave in different manners. The former preferentially forms in the hot and humid summer via photochemical reactions, although their precursor gases, such as SO2 and NOx, are emitted much more in winter. The latter seems to favorably form in the cold and dry winter. Synoptic meteorological and climate conditions can overwhelm the emission pattern in the formation of secondary aerosols. The PMF model identified six main sources: soil dust, coal combustion, biomass burning, traffic and waste incineration emission, industrial pollution, and secondary inorganic aerosol. Each of these sources has an annual mean contribution of 16, 14, 13, 3, 28, and 26%, respectively, to PM2.5. However, the relative contributions of these identified sources significantly vary with changing seasons. The results of trajectory clustering and the PSCF method demonstrated that regional sources could be crucial contributors to PM pollution in Beijing. In conclusion, we have unraveled some complex aspects of the pollution sources and formation processes of PM2.5 in Beijing. To our knowledge, this is the first systematic study that comprehensively explores the chemical characterizations and source apportionments of PM2.5 aerosol speciation in Beijing by applying multiple approaches based on a completely seasonal perspective.

/pdf/chemical-characterization-and-source-apportionment-of-pm-2-5-3q6oghogl3.pdf

Chemical characterization and source apportionment of PM 2.5 in Beijing: seasonal perspective

http://ira.lib.polyu.edu.hk/bitstream/10397/66328/1/Chen_Review_Biomass_Burning.pdf

A review of biomass burning: Emissions and impacts on air quality, health and climate in China

This study presents one of the first long term datasets including a statistical summary of PM2.5 concentrations obtained from one-year monitoring in 190 cities in China. We found only 25 out of 190 cities could meet the National Ambient Air Quality Standards of China, and the population-weighted mean of PM2.5 in Chinese cities are 61 μg/m3, ~3 times as high as global population-weighted mean, highlighting a high health risk. PM2.5 concentrations are generally higher in north than in south regions due to relative large PM emissions and unfavorable meteorological conditions for pollution dispersion. A remarkable seasonal variability of PM2.5 is observed with the highest during the winter and the lowest during the summer. Due to the enhanced contributions from dust particles and open biomass burning, high PM2.5 abundances are also found in the spring (in Northwest and West Central China) and autumn (in East China), respectively. In addition, we found the lowest and highest PM2.5 often occurs in the afternoon and evening hours, respectively, associated with daily variation of the boundary layer depth and anthropogenic emissions. The diurnal distribution of the PM2.5-to-CO ratio consistently displays a pronounced peak during the afternoon periods, reflecting a significant contribution of secondary PM formation.

/pdf/fine-particulate-matter-pm-2-5-in-china-at-a-city-level-3iffqhow56.pdf

Fine particulate matter (PM 2.5) in China at a city level

[1] Simultaneous measurements of atmospheric organic and elemental carbon (OC and EC) were taken during winter and summer seasons at 2003 in 14 cities in China. Daily PM2.5 samples were analyzed for OC and EC by the Interagency Monitoring of Protected Visual Environments (IMPROVE) thermal/optical reflectance protocol. Average PM2.5 OC concentrations in the 14 cities were 38.1 μg m−3 and 13.8 μg m−3 for winter and summer periods, and the corresponding EC were 9.9 μg m−3 and 3.6 μg m−3, respectively. OC and EC concentrations had summer minima and winter maxima in all the cities. Carbonaceous matter (CM), the sum of organic matter (OM = 1.6 × OC) and EC, contributed 44.2% to PM2.5 in winter and 38.8% in summer. OC was correlated with EC (R2: 0.56–0.99) in winter, but correlation coefficients were lower in summer (R2: 0.003–0.90). Using OC/EC enrichment factors, the primary OC, secondary OC and EC accounted for 47.5%, 31.7% and 20.8%, respectively, of total carbon in Chinese urban environments. More than two thirds of China's urban carbon is derived from directly emitted particles. Average OC/EC ratios ranged from 2.0 to 4.7 among 14 cities during winter and from 2.1 to 5.9 during summer. OC/EC ratios in this study were consistent with a possible cooling effect of carbonaceous aerosols over China.

/pdf/spatial-and-seasonal-distributions-of-carbonaceous-aerosols-kzmem5truu.pdf

Shi-hua Qi

Papers

Spatial and seasonal distributions of carbonaceous aerosols over China