There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

Radio frequency (RF) energy transfer and harvesting techniques have recently become alternative methods to power the next-generation wireless networks As this emerging technology enables proactive energy replenishment of wireless devices, it is advantageous in supporting applications with quality-of-service requirements In this paper, we present a comprehensive literature review on the research progresses in wireless networks with RF energy harvesting capability, which is referred to as RF energy harvesting networks (RF-EHNs) First, we present an overview of the RF-EHNs including system architecture, RF energy harvesting techniques, and existing applications Then, we present the background in circuit design as well as the state-of-the-art circuitry implementations and review the communication protocols specially designed for RF-EHNs We also explore various key design issues in the development of RF-EHNs according to the network types, ie, single-hop networks, multiantenna networks, relay networks, and cognitive radio networks Finally, we envision some open research directions

Wireless Networks With RF Energy Harvesting: A Contemporary Survey

This paper proposes COPE, a new architecture for wireless mesh networks. In addition to forwarding packets, routers mix (i.e., code) packets from different sources to increase the information content of each transmission. We show that intelligently mixing packets increases network throughput. Our design is rooted in the theory of network coding. Prior work on network coding is mainly theoretical and focuses on multicast traffic. This paper aims to bridge theory with practice; it addresses the common case of unicast traffic, dynamic and potentially bursty flows, and practical issues facing the integration of network coding in the current network stack. We evaluate our design on a 20-node wireless network, and discuss the results of the first testbed deployment of wireless network coding. The results show that using COPE at the forwarding layer, without modifying routing and higher layers, increases network throughput. The gains vary from a few percent to several folds depending on the traffic pattern, congestion level, and transport protocol.

/pdf/xors-in-the-air-practical-wireless-network-coding-17k31b3st4.pdf

XORs in the air: practical wireless network coding

This paper presents the design and implementation of the first in-band full duplex WiFi radios that can simultaneously transmit and receive on the same channel using standard WiFi 802.11ac PHYs and achieves close to the theoretical doubling of throughput in all practical deployment scenarios. Our design uses a single antenna for simultaneous TX/RX (i.e., the same resources as a standard half duplex system). We also propose novel analog and digital cancellation techniques that cancel the self interference to the receiver noise floor, and therefore ensure that there is no degradation to the received signal. We prototype our design by building our own analog circuit boards and integrating them with a fully WiFi-PHY compatible software radio implementation. We show experimentally that our design works robustly in noisy indoor environments, and provides close to the expected theoretical doubling of throughput in practice.

https://dl.acm.org/doi/pdf/10.1145/2486001.2486033

Full duplex radios

This paper discusses the design of a single channel full-duplex wireless transceiver. The design uses a combination of RF and baseband techniques to achieve full-duplexing with minimal effect on link reliability. Experiments on real nodes show the full-duplex prototype achieves median performance that is within 8% of an ideal full-duplexing system. This paper presents Antenna Cancellation, a novel technique for self-interference cancellation. In conjunction with existing RF interference cancellation and digital baseband interference cancellation, antenna cancellation achieves the amount of self-interference cancellation required for full-duplex operation. The paper also discusses potential MAC and network gains with full-duplexing. It suggests ways in which a full-duplex system can solve some important problems with existing wireless systems including hidden terminals, loss of throughput due to congestion, and large end-to-end delays.

/pdf/achieving-single-channel-full-duplex-wireless-communication-3pg630e002.pdf

Achieving single channel, full duplex wireless communication

The throughput of existing MIMO LANs is limited by the number of antennas on the AP. This paper shows how to overcome this limit. It presents interference alignment and cancellation (IAC), a new approach for decoding concurrent sender-receiver pairs in MIMO networks. IAC synthesizes two signal processing techniques, interference alignment and interference cancellation, showing that the combination applies to scenarios where neither interference alignment nor cancellation applies alone. We show analytically that IAC almost doubles the throughput of MIMO LANs. We also implement IAC in GNU-Radio, and experimentally demonstrate that for 2x2 MIMO LANs, IAC increases the average throughput by 1.5x on the downlink and 2x on the uplink.

/pdf/interference-alignment-and-cancellation-2sr97z2dqg.pdf

Interference alignment and cancellation

Communication primitives such as coding and multiple antenna processing have provided significant benefits for traditional wireless systems. Existing designs, however, consume significant power and computational resources, and hence cannot be run on low complexity, power constrained backscatter devices. This paper makes two main contributions: (1) we introduce the first multi-antenna cancellation design that operates on backscatter devices while retaining a small form factor and power footprint, (2) we introduce a novel coding mechanism that enables long range communication as well as concurrent transmissions and can be decoded on backscatter devices. We build hardware prototypes of the above designs that can be powered solely using harvested energy from TV and solar sources. The results show that our designs provide benefits for both RFID and ambient backscatter systems: they enable RFID tags to communicate directly with each other at distances of tens of meters and through multiple walls. They also increase the communication rate and range achieved by ambient backscatter systems by 100X and 40X respectively. We believe that this paper represents a substantial leap in the capabilities of backscatter communication.

/pdf/turbocharging-ambient-backscatter-communication-zcnf6fcoep.pdf

Turbocharging ambient backscatter communication

Wireless communication has become an intrinsic part of modern implantable medical devices (IMDs). Recent work, however, has demonstrated that wireless connectivity can be exploited to compromise the confidentiality of IMDs' transmitted data or to send unauthorized commands to IMDs---even commands that cause the device to deliver an electric shock to the patient. The key challenge in addressing these attacks stems from the difficulty of modifying or replacing already-implanted IMDs. Thus, in this paper, we explore the feasibility of protecting an implantable device from such attacks without modifying the device itself. We present a physical-layer solution that delegates the security of an IMD to a personal base station called the shield. The shield uses a novel radio design that can act as a jammer-cum-receiver. This design allows it to jam the IMD's messages, preventing others from decoding them while being able to decode them itself. It also allows the shield to jam unauthorized commands---even those that try to alter the shield's own transmissions. We implement our design in a software radio and evaluate it with commercial IMDs. We find that it effectively provides confidentiality for private data and protects the IMD from unauthorized commands.

/pdf/they-can-hear-your-heartbeats-non-invasive-security-for-3i8bz9ngw0.pdf

They can hear your heartbeats: non-invasive security for implantable medical devices

We present fingerIO, a novel fine-grained finger tracking solution for around-device interaction. FingerIO does not require instrumenting the finger with sensors and works even in the presence of occlusions between the finger and the device. We achieve this by transforming the device into an active sonar system that transmits inaudible sound signals and tracks the echoes of the finger at its microphones. To achieve sub-centimeter level tracking accuracies, we present an innovative approach that use a modulation technique commonly used in wireless communication called Orthogonal Frequency Division Multiplexing (OFDM). Our evaluation shows that fingerIO can achieve 2-D finger tracking with an average accuracy of 8 mm using the in-built microphones and speaker of a Samsung Galaxy S4. It also tracks subtle finger motion around the device, even when the phone is in the pocket. Finally, we prototype a smart watch form-factor fingerIO device and show that it can extend the interaction space to a 0.5×0.25 m2 region on either side of the device and work even when it is fully occluded from the finger.

https://dl.acm.org/doi/pdf/10.1145/2858036.2858580

FingerIO: Using Active Sonar for Fine-Grained Finger Tracking

Wi-Fi has traditionally been considered a power-consuming communication system and has not been widely adopting in the sensor network and IoT space. We introduce Passive Wi-Fi that demonstrates for the first time that one can generate 802.11b transmissions using backscatter communication, while consuming 3- 4 orders of magnitude lower power than existing Wi-Fi chipsets. Passive Wi-Fi transmissions can be decoded on any Wi-Fi device including routers, mobile phones and tablets. Building on this, we also present a network stack design that enables passive Wi-Fi transmitters to coexist with other devices in the ISM band, without incurring the power consumption of carrier sense and medium access control operations. We build prototype hardware and implement all four 802.11b bit rates on an FPGA platform. Our experimental evaluation shows that passive Wi-Fi transmissions can be decoded on off-the-shelf smartphones and Wi-Fi chipsets over distances of 30-100 feet in various line-of- sight and through-the-wall scenarios. Finally, we design a passive Wi-Fi IC that shows that 1 and 11 Mbps transmissions consume 14.5 and 59.2 µW respectively. This translates to 10000x lower power than existing Wi-Fi chipsets and 1000x lower power than Bluetooth LTE and ZigBee.

/pdf/passive-wi-fi-bringing-low-power-to-wi-fi-transmissions-1i5jg2815f.pdf

Shyamnath Gollakota

Papers

Interference alignment and cancellation

Turbocharging ambient backscatter communication

They can hear your heartbeats: non-invasive security for implantable medical devices

FingerIO: Using Active Sonar for Fine-Grained Finger Tracking

Passive Wi-Fi: bringing low power to Wi-Fi transmissions