Optical wireless communication (OWC) refers to transmission in unguided propagation media through the use of optical carriers, i.e., visible, infrared (IR), and ultraviolet (UV) bands. In this survey, we focus on outdoor terrestrial OWC links which operate in near IR band. These are widely referred to as free space optical (FSO) communication in the literature. FSO systems are used for high rate communication between two fixed points over distances up to several kilometers. In comparison to radio-frequency (RF) counterparts, FSO links have a very high optical bandwidth available, allowing much higher data rates. They are appealing for a wide range of applications such as metropolitan area network (MAN) extension, local area network (LAN)-to-LAN connectivity, fiber back-up, backhaul for wireless cellular networks, disaster recovery, high definition TV and medical image/video transmission, wireless video surveillance/monitoring, and quantum key distribution among others. Despite the major advantages of FSO technology and variety of its application areas, its widespread use has been hampered by its rather disappointing link reliability particularly in long ranges due to atmospheric turbulence-induced fading and sensitivity to weather conditions. In the last five years or so, there has been a surge of interest in FSO research to address these major technical challenges. Several innovative physical layer concepts, originally introduced in the context of RF systems, such as multiple-input multiple-output communication, cooperative diversity, and adaptive transmission have been recently explored for the design of next generation FSO systems. In this paper, we present an up-to-date survey on FSO communication systems. The first part describes FSO channel models and transmitter/receiver structures. In the second part, we provide details on information theoretical limits of FSO channels and algorithmic-level system design research activities to approach these limits. Specific topics include advances in modulation, channel coding, spatial/cooperative diversity techniques, adaptive transmission, and hybrid RF/FSO systems.

/pdf/survey-on-free-space-optical-communication-a-communication-239v68hfyw.pdf

Survey on Free Space Optical Communication: A Communication Theory Perspective

https://ir.nctu.edu.tw:443/bitstream/11536/30219/1/000088547100011.pdf

A new LDA-based face recognition system which can solve the small sample size problem

The various arguments for introducing optical interconnections to silicon CMOS chips are summarized, and the challenges for optical, optoelectronic, and integration technologies are discussed. Optics could solve many physical problems of interconnects, including precise clock distribution, system synchronization (allowing larger synchronous zones, both on-chip and between chips), bandwidth and density of long interconnections, and reduction of power dissipation. Optics may relieve a broad range of design problems, such as crosstalk, voltage isolation, wave reflection, impedence matching, and pin inductance. It may allow continued scaling of existing architectures and enable novel highly interconnected or high-bandwidth architectures. No physical breakthrough is required to implement dense optical interconnects to silicon chips, though substantial technological work remains. Cost is a significant barrier to practical introduction, though revolutionary approaches exist that might achieve economies of scale. An Appendix analyzes scaling of on-chop global electrical interconnects, including line inductance and the skin effect, both of which impose significant additional constraints on future interconnects.

/pdf/rationale-and-challenges-for-optical-interconnects-to-5clh2238g9.pdf

Rationale and challenges for optical interconnects to electronic chips

From image processing work, we know that the phase information is significantly more important than amplitude information in preserving the features of a visual scene. Is the same true in the case of a matched filter? From previous work [

	 J. L.
	 Horner
	 
	, 
Appl. Opt.21, 
4511(
1982)], we know that a pure phase correlation filter can have an optical efficiency of 100% in an optical correlation system. We examine this relationship between phase and amplitude in the case of alphanumeric characters, with and without noise, using a computer simulation. We compare the phase-only and amplitude-only filters to the classical matched filter using the criteria of discrimination, correlation peak, and optical efficiency. Three-dimensional plots of the autocorrelation and cross-correlation functions are presented and discussed.

Phase-only matched filtering

In pattern recognition, feature extraction techniques are widely employed to reduce the dimensionality of data and to enhance the discriminatory information. Principal component analysis (PCA) and linear discriminant analysis (LDA) are the two most popular linear dimensionality reduction methods. However, PCA is not very effective for the extraction of the most discriminant features, and LDA is not stable due to the small sample size problem . In this paper, we propose some new (linear and nonlinear) feature extractors based on maximum margin criterion (MMC). Geometrically, feature extractors based on MMC maximize the (average) margin between classes after dimensionality reduction. It is shown that MMC can represent class separability better than PCA. As a connection to LDA, we may also derive LDA from MMC by incorporating some constraints. By using some other constraints, we establish a new linear feature extractor that does not suffer from the small sample size problem, which is known to cause serious stability problems for LDA. The kernelized (nonlinear) counterpart of this linear feature extractor is also established in the paper. Our extensive experiments demonstrate that the new feature extractors are effective, stable, and efficient.

/pdf/efficient-and-robust-feature-extraction-by-maximum-margin-1jn18ogfqh.pdf

Efficient and robust feature extraction by maximum margin criterion

Conditions are determined for which optical interconnects can transmit information at a higher data rate and consume lc3s power than the equivalent electrical interconnections. The analysis is performed for free-space optical intrachip communication links. Effects of scaling circuit dimensions, presence of signal fan-out, and the use of light modulators as optical signal transmitters are also discussed.

Comparison between optical and electrical interconnects based on power and speed considerations

Coherent image amplification by two-wave coupling in a crystal of photorefractive BaTiO3 is analyzed. This amplifier is optimized with respect to such operational characteristics as gain versus amplified image quality and space-bandwidth product. Experimental results that demonstrate coherent image amplification of 4000, space-bandwidth product of 1,000,000, and gray-level dynamic range of greater than 100 are presented.

Optimal coherent image amplification by two-wave coupling in photorefractive BaTiO3

We investigate an incremental recording technique for multiplexed hologram storage in photorefractive crystals, in which each hologram is recorded with multiple short exposures. The performance is theoretically compared with that of scheduled (single exposure per hologram) recording. Our analysis shows that this technique systematically controls the signal uniformity and can also decrease the total recording time. We present an experimental demonstration with LiNbO(3) using a binary orthogonal phase-code addressing technique.

Incremental recording for photorefractive hologram multiplexing

The performance characteristics of optoelectronic and VLSI multistage interconnection networks are compared The bases of the comparison include speed, bandwidth, power consumption, and footprint area The communication network used in the comparison is a synchronous packet-switched multistage interconnection network built from 2*2 bit-serial switching elements CMOS technology was used in the VLSI implementation, and it is assumed that the entire network resides on a single chip Regular free-space optical interconnects are used in the optoelectronic implementation The results show that for large networks optoelectronics offers higher speed and lower area than VLSI Based on the assumed technology parameters, optoelectronics outperforms VLSI in bandwidth for network sizes above 256 >

Performance comparison between optoelectronic and VLSI multistage interconnection networks

We present a method for reproducing diffractive optical elements in quantity. The method is compatible with VLSI microfabrication techniques and involves generating a gray-scale mask. The gray-scale mask is employed in an optical aligner to expose an analog photoresist on any environmentally durable substrate, e.g., glass, quartz, semiconductor, or metal, one exposure for each diffractive optical element. After copies of the mask on the photoresist are developed, many substrates can be processed in parallel in a chemically assisted ion-beam etcher to transfer the microstructures on the analog resists simultaneously onto the surfaces of the substrates.

Cost-effective mass fabrication of multilevel diffractive optical elements by use of a single optical exposure with a gray-scale mask on high-energy beam-sensitive glass.

Sing H. Lee

Papers

Comparison between optical and electrical interconnects based on power and speed considerations

Optimal coherent image amplification by two-wave coupling in photorefractive BaTiO3

Incremental recording for photorefractive hologram multiplexing

Performance comparison between optoelectronic and VLSI multistage interconnection networks

Cost-effective mass fabrication of multilevel diffractive optical elements by use of a single optical exposure with a gray-scale mask on high-energy beam-sensitive glass.