Low-resistivity metal-semiconductor (M-S) contact is one of the urgent challenges in the research of 2D transition metal dichalcogenides (TMDs). Here, we report a chloride molecular doping technique which greatly reduces the contact resistance (Rc) in the few-layer WS2 and MoS2. After doping, the Rc of WS2 and MoS2 have been decreased to 0.7 kohm*um and 0.5 kohm*um, respectively. The significant reduction of the Rc is attributed to the achieved high electron doping density thus significant reduction of Schottky barrier width. As a proof-ofconcept, high-performance few-layer WS2 field-effect transistors (FETs) are demonstrated, exhibiting a high drain current of 380 uA/um, an on/off ratio of 4*106, and a peak field-effect mobility of 60 cm2/V*s. This doping technique provides a highly viable route to diminish the Rc in TMDs, paving the way for high-performance 2D nano-electronic devices.

Chloride Molecular Doping Technique on 2D Materials: WS2 and MoS2

In the post-Moore era, 2D materials with rich physical properties have attracted widespread attention from the scientific and industrial communities. Among 2D materials, the 2D homojunctions are of great promise in designing novel electronic and optoelectronic devices due to their unique geometries and properties such as homogeneous components, perfect lattice matching, and efficient charge transfer at the interface. In this article, a pioneering review focusing on the structural design and device application of 2D homojunctions such as p-n homojunctions, heterophase homojunctions, and layer-engineered homojunctions is provided. The preparation strategies to construct 2D homojunctions including vapor-phase deposition, lithium intercalation, laser irradiation, chemical doping, electrostatic doping, and photodoping are summarized in detail. Specifically, a careful review on the applications of the 2D homojunctions in electronics (e.g., field-effect transistors, rectifiers, and inverters) and optoelectronics (e.g., light-emitting diodes, photovoltaics, and photodetectors) is provided. Eventually, the current challenges and future perspectives are commented for promoting the rapid development of 2D homojunctions.

2D Homojunctions for Electronics and Optoelectronics.

Electrons in monolayer transition metal dichalcogenides are characterized by valley and spin quantum degrees of freedom, making it possible to explore new physical phenomena and to foresee novel applications in the fields of electronics and optoelectronics. Theoretical proposals further suggest that Berry curvature effects, together with strong spin–orbit interactions, can generate unconventional Landau levels (LLs) under a perpendicular magnetic field. In particular, these would support valley- and spin-polarized chiral edge states in the quantum Hall regime. However, this unique LL structure has not been observed experimentally in transition metal dichalcogenides. Here we report the observation of fully valley- and spin-polarized LLs in high-quality WSe2 monolayers achieved by exploiting a van der Waals heterostructure device platform. We applied handedness-resolved optical reflection spectroscopy to probe the inter-LL transitions at individual valleys and derived the LL structure in turn. We also measured a sizeable doping-induced mass renormalization driven by the strong Coulomb interactions. The fabrication of high-quality WSe2 monolayers makes it possible to access the fully valley- and spin-polarized structure of Landau levels theoretically predicted for transition metal dichalcogenides.

/pdf/valley-and-spin-polarized-landau-levels-in-monolayer-wse2-3v2vlcsb4u.pdf

Valley- and spin-polarized Landau levels in monolayer WSe2

Owing to their superior carrier mobility, strong light-matter interactions, and flexibility at the atomically thin thickness, two-dimensional (2D) materials are attracting wide interest for application in electronic and optoelectronic devices, including rectifying diodes, transistors, memory, photodetectors, and light-emitting diodes. At the heart of these devices, Schottky, PN, and tunneling junctions are playing an essential role in defining device function. Intriguingly, the ultrathin thickness and unique van der Waals (vdW) interlayer coupling in 2D materials has rendered enormous opportunities for the design and tailoring of various 2D junctions, e.g. using Lego-like hetero-stacking, surface decoration, and field-effect modulation methods. Such flexibility has led to marvelous breakthroughs during the exploration of 2D electronics and optoelectronic devices. To advance further, it is imperative to provide an overview of existing strategies for the engineering of various 2D junctions for their integration in the future. Thus, in this review, we provide a comprehensive survey of previous efforts toward 2D Schottky, PN, and tunneling junctions, and the functional devices built from them. Though these junctions exhibit similar configurations, distinct strategies have been developed for their optimal figures of merit based on their working principles and functional purposes.

Design and tailoring of two-dimensional Schottky, PN and tunnelling junctions for electronics and optoelectronics

2D layered materials (2DLMs) have come under the limelight of scientific and engineering research and broke new ground across a broad range of disciplines in the past decade. Nevertheless, the members of stoichiometric 2DLMs are relatively limited. This renders them incompetent to fulfill the multitudinous scenarios across the breadth of electronic and optoelectronic applications since the characteristics exhibited by a specific material are relatively monotonous and limited. Inspiringly, alloying of 2DLMs can markedly broaden the 2D family through composition modulation and it has ushered a whole new research domain: 2DLM alloy nano-electronics and nano-optoelectronics. This review begins with a comprehensive survey on synthetic technologies for the production of 2DLM alloys, which include chemical vapor transport, chemical vapor deposition, pulsed-laser deposition, and molecular beam epitaxy, spanning their development, as well as, advantages and disadvantages. Then, the up-to-date advances of 2DLM alloys in electronic devices are summarized. Subsequently, the up-to-date advances of 2DLM alloys in optoelectronic devices are summarized. In the end, the ongoing challenges of this emerging field are highlighted and the future opportunities are envisioned, which aim to navigate the coming exploration and fully exert the pivotal role of 2DLMs toward the next generation of electronic and optoelectronic devices.

2D Layered Material Alloys: Synthesis and Application in Electronic and Optoelectronic Devices

Lateral homojunctions made of two-dimensional (2D) layered materials are promising for optoelectronic and electronic applications. Here, we report the lateral WSe2-WSe2 homojunction photodiodes formed spontaneously by thickness modulation in which there are unique band structures of a unilateral depletion region. The electrically tunable junctions can be switched from n-n to p-p diodes, and the corresponding rectification ratio increases from about 1 to 1.2 × 104. In addition, an obvious photovoltaic behavior is observed at zero gate voltage, which exhibits a large open voltage of 0.49 V and a short-circuit current of 0.125 nA under visible light irradiation. In addition, due to the unilateral depletion region, the diode can achieve a high detectivity of 4.4 × 1010 Jones and a fast photoresponse speed of 0.18 ms at Vg = 0 and Vds = 0. The studies not only demonstrated the great potential of the lateral homojunction photodiodes for a self-power photodetector but also allowed for the development of other functional devices, such as a nonvolatile programmable diode for logic rectifiers.

A Self-Powered Photovoltaic Photodetector Based on a Lateral WSe2-WSe2 Homojunction.

We report a systematic study on the thickness-dependent superconductivity and transport properties in exfoliated layered topological superconductor β-PdBi2. The superconducting transition temperature Tc is found to decrease with the decreasing thickness. Below a critical thickness of 45 nm, the superconductivity is suppressed, but followed by an abrupt resistance jump near Tc, which is in opposite to the behavior in a superconductor. We attribute suppressed Tc to the enhanced disorder as the thickness decreases. The possible physical mechanisms were discussed for the origination of sharply increased resistance in thinner β-PdBi2 samples.

Wenshuai Gao

Papers

A Self-Powered Photovoltaic Photodetector Based on a Lateral WSe2-WSe2 Homojunction.

Thickness Dependence of Superconductivity in Layered Topological Superconductor β-PdBi2.