In this chapter, we will restrict our attention to the ferrites and a few other closely related materials. The great interest in ferrites stems from their unique combination of a spontaneous magnetization and a high electrical resistivity. The observed magnetization results from the difference in the magnetizations of two non-equivalent sub-lattices of the magnetic ions in the crystal structure. Materials of this type should strictly be designated as “ferrimagnetic” and in some respects are more closely related to anti-ferromagnetic substances than they are to ferromagnetics in which the magnetization results from the parallel alignment of all the magnetic moments present. We shall not adhere to this special nomenclature except to emphasize effects, which are due to the existence of the sub-lattices.

Ferromagnetic materials

Nanodevices don't use much energy, and if the little they do need can be scavenged from vibrations associated with foot steps, heart beats, noises and air flow, a whole range of applications in personal electronics, sensing and defence technologies opens up. Energy gathering of that type requires a technology that works at low frequency range (below 10 Hz), ideally based on soft, flexible materials. A group working at Georgia Institute of Technology has now come up with a system that converts low-frequency vibration/friction energy into electricity using piezoelectric zinc oxide nanowires grown radially around textile fibres. By entangling two fibres and brushing their associated nanowires together, mechanical energy is converted into electricity via a coupled piezoelectric-semiconductor process. This work shows a potential method for creating fabrics which scavenge energy from light winds and body movement. A self-powering nanosystem that harvests its operating energy from the environment is an attractive proposition for sensing, personal electronics and defence technologies1. This is in principle feasible for nanodevices owing to their extremely low power consumption2,3,4,5. Solar, thermal and mechanical (wind, friction, body movement) energies are common and may be scavenged from the environment, but the type of energy source to be chosen has to be decided on the basis of specific applications. Military sensing/surveillance node placement, for example, may involve difficult-to-reach locations, may need to be hidden, and may be in environments that are dusty, rainy, dark and/or in deep forest. In a moving vehicle or aeroplane, harvesting energy from a rotating tyre or wind blowing on the body is a possible choice to power wireless devices implanted in the surface of the vehicle. Nanowire nanogenerators built on hard substrates were demonstrated for harvesting local mechanical energy produced by high-frequency ultrasonic waves6,7. To harvest the energy from vibration or disturbance originating from footsteps, heartbeats, ambient noise and air flow, it is important to explore innovative technologies that work at low frequencies (such as <10 Hz) and that are based on flexible soft materials. Here we present a simple, low-cost approach that converts low-frequency vibration/friction energy into electricity using piezoelectric zinc oxide nanowires grown radially around textile fibres. By entangling two fibres and brushing the nanowires rooted on them with respect to each other, mechanical energy is converted into electricity owing to a coupled piezoelectric–semiconductor process8,9. This work establishes a methodology for scavenging light-wind energy and body-movement energy using fabrics.

http://www.nanoscience.gatech.edu/zlwang/paper/2008/08_nat_1.pdf

Microfibre–nanowire hybrid structure for energy scavenging

We report a size dependence of Young's modulus in [0001] oriented ZnO nanowires (NWs) with diameters ranging from 17 to 550 nm for the first time. The measured modulus for NWs with diameters smaller than about 120 nm is increasing dramatically with the decreasing diameters, and is significantly higher than that of the larger ones whose modulus tends to that of bulk ZnO. A core-shell composite NW model in terms of the surface stiffening effect correlated with significant bond length contractions occurred near the {1010} free surfaces (which extend several layers deep into the bulk and fade off slowly) is proposed to explore the origin of the size dependence, and present experimental result is well explained. Furthermore, it is possible to estimate the size-related elastic properties of GaN nanotubes and relative nanostructures by using this model.

Size dependence of Young's modulus in ZnO nanowires.

I. Introduction A FUNCTIONAL relationship between cell growth and the initiation and progression of events associated with differentiation has been a fundamental question challenging developmental biologists for more than a century. In the case of bone, as observed with other cells and tissue, the relationship of growth and differentiation must be maintained and stringently regulated, both during development and throughout the life of the organism, to support tissue remodeling. For many years, bone was defined anatomically and examined largely in a descriptive manner by ultrastructural analysis and by biochemical and histochemical methods. These studies provided the basis for our understanding of bone tissue organization and orchestration of the progressive recruitment, proliferation, and differentiation of the various cellular components of bone tissue. Now, complemented by an increased knowledge of molecular mechanisms that are associated with and regulate expression of genes encoding phenotypic compone...

Molecular mechanism mediating proliferation, defferentiation interralationships during progressie development of the osteoblast phenotype

Giant and isotropic magnetoresistance as huge as −53% was observed in magnetic manganese oxide La0.72Ca0.25MnOz films with an intrinsic antiferromagnetic spin structure. We ascribe this magnetoresistance to spin‐dependent electron scattering due to spin canting of the manganese oxide.

31p-S-4 Giant Magnetoresistance in Magnetic Manganese Oxide with Intrinsic Antiferromagnetic Spin Structure

Oxidation resistance of TiN, CrN, TiAlN and CrAlN coatings deposited by lateral rotating cathode arc

Surface modification of ZnO nanocrystals

A bond-order–bond-length–bond-strength (bond-OLS) correlation mechanism is presented for consistent insight into the origin of the shape-and-size dependence of a nanosolid, aiming to provide guidelines for designing nanomaterials with desired functions. It is proposed that the coordination number imperfection of an atom at a surface causes the remaining bonds of the lower-coordinated surface atom to relax spontaneously; as such, the bond energy rises (in absolute value). The bond energy rise contributes not only to the cohesive energy (ECoh) of the surface atom but also to the energy density in the relaxed region. ECoh relates to thermodynamic properties such as self-assembly, phase transition and thermal stability of a nanosolid. The binding energy density rise is responsible for the changes of the system Hamiltonian and related properties, such as the bandgap, core-level shift, phonon frequency and the dielectrics of a nanosolid of which the surface curvature and the portion of surface atoms vary with particle size. The bond-OLS premise, involving no assumptions or freely adjustable parameters, has led to consistency between predictions and experimental observations of a number of outstanding properties of nanosolids.

https://iopscience.iop.org/article/10.1088/0953-8984/14/34/301/pdf

Bond-order?bond-length?bond-strength (bond-OLS) correlation mechanism for the shape-and-size dependence of a nanosolid

Solid-lubricant MoS 2 coatings have been successfully applied in high vacuum and aerospace environments. However, these coatings are very sensitive to water vapor and not suitable for applications in moist environments. In this work, Cr- and T-doped MoS 2 composite coatings were developed. The results demonstrated that these composite coatings are promising for applications in high humidity environments. MoS 2 –Cr and MoS 2 –Ti composite coatings with different Cr or Ti content were deposited on high speed steel substrate by unbalanced magnetron sputtering. The composition, microstructure, and mechanical properties of the as-deposited MoS 2 -metal composite coatings were analyzed by energy dispersive analysis of X-ray (EDX), X-ray diffraction (XRD), and nanoindentation experiments. The tribological properties of the coatings were evaluated against an alumina ball under different relative humidity atmosphere using a ball-on-disc tribometer. The MoS 2 –Cr and MoS 2 –Ti coatings showed a maximum hardness of 7.5 GPa and 8.4 GPa at a dopant content of 16.6 at.% Cr or 20.2 at.% Ti, respectively. The tribological test results showed that, with a small amount of Cr and/or Ti doping, the tribological properties of MoS 2 coatings under humid atmosphere could be significantly improved. The optimum doping level was found to be around 10 at.% for both MoS 2 –Cr coatings and MoS 2 –Ti coatings to show the best tribological properties, with both the lowest friction coefficient and wear rate. The excellent tribological properties of the MoS 2 –Cr and MoS 2 –Ti coatings with an appropriate metal doping level in moist atmosphere are found due to their ability to form stable transfer layer on the surface of the counterbody, which supplies lubrication for the contact surface.

/pdf/tribological-properties-of-cr-and-ti-doped-mos2-composite-4zz4p9net3.pdf

Xianting Zeng

Papers

Oxidation resistance of TiN, CrN, TiAlN and CrAlN coatings deposited by lateral rotating cathode arc

Surface modification of ZnO nanocrystals

Bond-order?bond-length?bond-strength (bond-OLS) correlation mechanism for the shape-and-size dependence of a nanosolid

Tribological properties of Cr- and Ti-doped MoS2 composite coatings under different humidity atmosphere

Osteoblastic cell response on fluoridated hydroxyapatite coatings.