This review provides a perspective on the recent developments in the transmission of light through subwavelength apertures in metal films. The main focus is on the phenomenon of extraordinary optical transmission in periodic hole arrays, discovered over a decade ago. It is shown that surface electromagnetic modes play a key role in the emergence of the resonant transmission. These modes are also shown to be at the root of both the enhanced transmission and beaming of light found in single apertures surrounded by periodic corrugations. This review describes both the theoretical and experimental aspects of the subject. For clarity, the physical mechanisms operating in the different structures considered are analyzed within a common theoretical framework. Several applications based on the transmission properties of subwavelength apertures are also addressed.

http://digital.csic.es/bitstream/10261/47904/1/Light%20passing.pdf

Light passing through subwavelength apertures

This Colloquium analyzes the interaction of light with two-dimensional periodic arrays of particles and holes. The enhanced optical transmission observed in the latter and the presence of surface modes in patterned metal surfaces is thoroughly discussed. A review of the most significant discoveries in this area is presented first. A simple tutorial model is then formulated to capture the essential physics involved in these phenomena, while allowing analytical derivations that provide deeper insight. Comparison with more elaborated calculations is offered as well. Finally, hole arrays in plasmon-supporting metals are compared to perforated perfect conductors, thus assessing the role of plasmons in these types of structures through analytical considerations. The developments that have been made in nanophotonics areas related to plasmons in nanostructures, extraordinary optical transmission in hole arrays, complete resonant absorption and emission of light, and invisibility in structured metals are illustrated in this Colloquium in a comprehensive, tutorial fashion.

/pdf/colloquium-light-scattering-by-particle-and-hole-arrays-2jqp2wvyzg.pdf

Colloquium: Light scattering by particle and hole arrays

Have you ever felt that the very title, Progress in Optics, conjured an image in your mind? Don’t you see a row of handsomely printed books, bearing the editorial stamp of one of the most brilliant members of the optics community, and chronicling the field of optics since the invention of the laser? If so, you are certain to move the bookend to make room for Volume 16, the latest of this series. It contains seven chapters on widely diverging topics, written by well-known authorities in their fields. These are: 1) Laser Selective Photophysics and Photochemistry by V. S. Letokhov, 2) Recent Advances in Phase Profiles (sic) Generation by J. J. Clair and C. I. Abitbol, 3 ) Computer-Generated Holograms: Techniques and Applications by W.-H. Lee, 4) Speckle Interferometry by A. E. Ennos, 5 ) Deformation  Invariant, Space-Variant Optical  Pattern Recognition by D. Casasent and D. Psaltis, 6) Light Emission from High-Current Surface-Spark Discharges by R. E. Beverly, and 7) Semiclassical Radiation  Theory within a  QuantumMechanical Framework by I. R. Senitzkt. The  breadth of topic  matter  spanned  by  these  chapters makes it impossible, for this reviewer at least, to pass judgement on the comprehensiveness, relevance, and completeness of every chapter. With an editorial board as prominent as that of Progress in Optics, however, it seems hardly likely that such comments should be necessary. It should certainly be possible to take the authority of each author as credible. The only remaining judgment to be  made on these chapters is their readability. In short, what are they like to read? The first sentence of the first chapter greets the eye with an obvious typographical error: “The creation of coherent laser light source, that have tunable radiation, opened the . . . .” Two pages later we find: “When two types of atoms or molecules of different isotopic composition ( A and B ) have even one spectral line that does not overlap with others, it is pos-

Progress in optics

Optical coatings usually consist of many multilayers of thin films to achieve the desired properties A new approach using interference effects between an absorbing dielectric film and a metallic substrate now enables ultrathin optical coatings that could also find applications as thin solar cells or photodetectors

Nanometre optical coatings based on strong interference effects in highly absorbing media

BACKGROUND Future high-performance portable and wearable optical devices and systems with small footprints and low weights will require components with small form factors and enhanced functionality. Planar components based on diffractive optics (e.g., gratings, Fresnel lenses) and thin-film optics (e.g., dielectric filters, Bragg reflectors) have been around for decades; however, their limited functionality and difficulty of integration have been key incentives to search for better alternatives. Owing to its potential for vertical integration and marked design flexibility, metasurface-based flat optics provides a rare opportunity to overcome these challenges. The building blocks (BBs) of metasurfaces are subwavelength-spaced scatterers. By suitably adjusting their shape, size, position, and orientation with high spatial resolution, one can control the basic properties of light (phase, amplitude, polarization) and thus engineer its wavefront at will. This possibility greatly expands the frontiers of optical design by enabling multifunctional components with attendant reduction of thickness, size, and complexity. ADVANCES Recent progress in fabrication techniques and in the theory and design of metasurfaces holds promise for this new optical platform (metaoptics) to replace or complement conventional components in many applications. One major advance has been the migration to all-dielectric metasurfaces. Here, we discuss the key advantages of using dielectric phase-shifting elements with low optical loss and strong light confinement in the visible and near-infrared regions as BBs of flat lenses (metalenses). High–numerical aperture metalenses that are free of spherical aberrations have been implemented to achieve diffraction-limited focusing with subwavelength resolution, without requiring the complex shapes of aspherical lenses. Achromatic metalenses at discrete wavelengths and over a bandwidth have been realized by dispersion engineering of the phase shifters. By suitably adjusting the geometrical parameters of the latter, one can impart polarization- and wavelength-dependent phases to realize multifunctional metalenses with only one ultrathin layer. For example, polarization-sensitive flat lenses for chiral imaging and circular dichroism spectroscopy with high resolution have been realized, and off-axis metalenses with large engineered angular dispersion have been used to demonstrate miniature spectrometers. The fabrication of metalenses is straightforward and often requires one-step lithography, which can be based on high-throughput techniques such as deep-ultraviolet and nanoimprint lithography. OUTLOOK In the near future, the ability to fabricate metalenses and other metaoptical components with a planar process using the same lithographic tools for manufacturing integrated circuits (ICs) will have far-reaching implications. We envision that camera modules widely employed in cell phones, laptops, and myriad applications will become thinner and easier to optically align and package, with metalenses and the complementary metal-oxide semiconductor–compatible sensor manufactured by the same foundries. The unprecedented design freedom of metalenses and other metasurface optical components will greatly expand the range of applications of micro-optics and integrated optics. We foresee a rapidly increasing density of nanoscale optical elements on metasurface-based chips, with attendant marked increases in performance and number of functionalities. Such digital optics will probably follow a Moore-like law, similar to that governing the scaling of ICs, leading to a wide range of high-volume applications.

http://science.sciencemag.org/content/sci/358/6367/eaam8100.full.pdf

Metalenses: Versatile multifunctional photonic components

Inspired by the structural color from the multilayer nanophotonic structures in Morpho butterfly wing scales, 3D lamellae layers in dielectric polymers (polymethyl methacrylate, PMMA) with n ∼ 1.5 were designed and fabricated by standard top-down electron beam lithography with one-step exposure followed by an alternating development/dissolution process of PMMA/LOR (lift-off resist) multilayers. This work offers direct proof of the structural blue/green color via lithographically-replicated PMMA/air multilayers, analogous to those in real Morpho butterfly wings. The success of nanolithography in this work for the 3D lamellae structures in dielectric polymers not only enables us to gain deeper insight into the mysterious blue color of the Morpho butterfly wings, but also breaks through the bottleneck in technical development toward broad applications in gas/liquid sensors, 3D meta-materials, coloring media, and infrared imaging devices, etc.

Lithographically-generated 3D lamella layers and their structural color

Processing study of SU-8 pillar profiles with high aspect ratio by electron-beam lithography

Polarimetric imaging enhances the ability to distinguish objects from a bright background by detecting their particular polarization status, which offers another degree of freedom in infrared remote sensing. However, to scale up by monolithically integrating grating-based polarizers onto a focal plane array (FPA) of infrared detectors, fundamental technical obstacles must be overcome, including reductions of the extinction ratio by the misalignment between the polarizer and the detector, grating line width fluctuations, the line edge roughness, etc. This paper reports the authors’ latest achievements in overcoming those problems by solving key technical issues regarding the integration of large-scale polarizers onto the chips of FPAs with individual indium gallium arsenide/indium phosphide (InGaAs/InP) sensors as the basic building blocks. Polarimetric and photovoltaic chips with divisions of the focal plane of 540 × 4 pixels and 320 × 256 superpixels have been successfully manufactured. Polarimetric imaging with enhanced contrast has been demonstrated. The progress made in this work has opened up a broad avenue toward industrialization of high quality polarimetric imaging in infrared wavelengths.

Precision integration of grating-based polarizers onto focal plane arrays of near-infrared photovoltaic detectors for enhanced contrast polarimetric imaging

Polarization imaging has become a widely-applied detection technique, due to the capabilities of enhanced image contrast and object recognition. Here, we demonstrate 320 × 256 InGaAs focal plane array (FPA) integrated with superpixel-structured subwavelength aluminum grating. An extinction ratio of up to 19:1 at 1310 nm is realized, which indicates a good capability of near-infrared polarization detection. Theoretical simulation shows a fairly high extinction ratio for such superpixel structure. This difference between the actual extinction ratio and the theoretical extinction ratio is further discussed by analyzing the effects of the alignment deviation and structural parameter deviations induced during the actual process. Moreover, the imaging results show that the fabricated polarimetric InGaAs FPA presents a more obvious profile for artificial objects, compared to the conventional detector. Such FPAs integrated with superpixel-structured grating are very promising for high performance polarization imaging in the short wavelength infrared band.

Research on polarization performance of InGaAs focal plane array integrated with superpixel-structured subwavelength grating

Metasurfaces consisting of a two-dimensional metallic nano-antenna array are capable of transferring a Gaussian beam into an optical vortex with a helical phase front and a phase singularity by manipulating the polarization/phase status of light. This miniaturizes a laboratory scaled optical system into a wafer scale component, opening up a new area for broad applications in optics. However, the low conversion efficiency to generate a vortex beam from circularly polarized light hinders further development. This paper reports our recent success in improving the efficiency over a broad waveband at the visible frequency compared with the existing work. The choice of material, the geometry and the spatial organization of meta-atoms, and the fabrication fidelity are theoretically investigated by the Jones matrix method. The theoretical conversion efficiency over 40% in the visible wavelength range is worked out by systematic calculation using the finite difference time domain (FDTD) method. The fabricated metasurface based on the parameters by theoretical optimization demonstrates a high quality vortex in optical frequencies with a significantly enhanced efficiency of over 20% in a broad waveband.

Yifang Chen

Papers

Lithographically-generated 3D lamella layers and their structural color

Processing study of SU-8 pillar profiles with high aspect ratio by electron-beam lithography

Precision integration of grating-based polarizers onto focal plane arrays of near-infrared photovoltaic detectors for enhanced contrast polarimetric imaging

Research on polarization performance of InGaAs focal plane array integrated with superpixel-structured subwavelength grating

Reconstructing a plasmonic metasurface for a broadband high-efficiency optical vortex in the visible frequency