Example of International Journal of Crashworthiness format
Recent searches

Example of International Journal of Crashworthiness format Example of International Journal of Crashworthiness format Example of International Journal of Crashworthiness format Example of International Journal of Crashworthiness format Example of International Journal of Crashworthiness format Example of International Journal of Crashworthiness format
Sample paper formatted on SciSpace - SciSpace
This content is only for preview purposes. The original open access content can be found here.
Look Inside
Example of International Journal of Crashworthiness format Example of International Journal of Crashworthiness format Example of International Journal of Crashworthiness format Example of International Journal of Crashworthiness format Example of International Journal of Crashworthiness format Example of International Journal of Crashworthiness format
Sample paper formatted on SciSpace - SciSpace
This content is only for preview purposes. The original open access content can be found here.
open access Open Access

International Journal of Crashworthiness — Template for authors

Publisher: Taylor and Francis
Categories Rank Trend in last 3 yrs
Industrial and Manufacturing Engineering #124 of 336 down down by 14 ranks
Mechanical Engineering #231 of 596 up up by 15 ranks
Transportation #47 of 113 down down by 3 ranks
journal-quality-icon Journal quality:
Good
calendar-icon Last 4 years overview: 219 Published Papers | 645 Citations
indexed-in-icon Indexed in: Scopus
last-updated-icon Last updated: 21/07/2020
Related journals
Insights
General info
Top papers
Popular templates
Get started guide
Why choose from SciSpace
FAQ

Related Journals

open access Open Access

Taylor and Francis

Quality:  
High
CiteRatio: 6.4
SJR: 0.884
SNIP: 1.244
open access Open Access

Taylor and Francis

Quality:  
High
CiteRatio: 6.7
SJR: 0.906
SNIP: 1.54
open access Open Access

SAGE

Quality:  
High
CiteRatio: 4.9
SJR: 0.861
SNIP: 1.273
open access Open Access

Emerald Publishing

Quality:  
High
CiteRatio: 6.0
SJR: 0.827
SNIP: 1.281

Journal Performance & Insights

Impact Factor

CiteRatio

Determines the importance of a journal by taking a measure of frequency with which the average article in a journal has been cited in a particular year.

A measure of average citations received per peer-reviewed paper published in the journal.

1.477

12% from 2018

Impact factor for International Journal of Crashworthiness from 2016 - 2019
Year Value
2019 1.477
2018 1.317
2017 1.053
2016 0.895
graph view Graph view
table view Table view

2.9

32% from 2019

CiteRatio for International Journal of Crashworthiness from 2016 - 2020
Year Value
2020 2.9
2019 2.2
2018 2.2
2017 1.9
2016 1.7
graph view Graph view
table view Table view

insights Insights

  • Impact factor of this journal has increased by 12% in last year.
  • This journal’s impact factor is in the top 10 percentile category.

insights Insights

  • CiteRatio of this journal has increased by 32% in last years.
  • This journal’s CiteRatio is in the top 10 percentile category.

SCImago Journal Rank (SJR)

Source Normalized Impact per Paper (SNIP)

Measures weighted citations received by the journal. Citation weighting depends on the categories and prestige of the citing journal.

Measures actual citations received relative to citations expected for the journal's category.

0.4

10% from 2019

SJR for International Journal of Crashworthiness from 2016 - 2020
Year Value
2020 0.4
2019 0.363
2018 0.462
2017 0.346
2016 0.43
graph view Graph view
table view Table view

1.373

12% from 2019

SNIP for International Journal of Crashworthiness from 2016 - 2020
Year Value
2020 1.373
2019 1.224
2018 0.996
2017 0.798
2016 0.913
graph view Graph view
table view Table view

insights Insights

  • SJR of this journal has increased by 10% in last years.
  • This journal’s SJR is in the top 10 percentile category.

insights Insights

  • SNIP of this journal has increased by 12% in last years.
  • This journal’s SNIP is in the top 10 percentile category.

International Journal of Crashworthiness

Guideline source: View

All company, product and service names used in this website are for identification purposes only. All product names, trademarks and registered trademarks are property of their respective owners.

Use of these names, trademarks and brands does not imply endorsement or affiliation. Disclaimer Notice

Taylor and Francis

International Journal of Crashworthiness

Because of the rapid growth of Crashworthiness as a stand alone engineering subject, there is a need for a journal devoted to the crash behaviour of structures and materials, and impact biomechanics.The International Journal of Crashworthiness provides an authoritative forum f...... Read More

Engineering

i
Last updated on
21 Jul 2020
i
ISSN
1358-8265
i
Impact Factor
High - 1.459
i
Open Access
No
i
Sherpa RoMEO Archiving Policy
Green faq
i
Plagiarism Check
Available via Turnitin
i
Endnote Style
Download Available
i
Bibliography Name
Taylor and Francis Custom Citation
i
Citation Type
Numbered
[25]
i
Bibliography Example
Blonder GE, Tinkham M, Klapwijk TM. Transition from metallic to tunneling regimes in superconducting microconstrictions: Excess current, charge imbalance, and supercurrent conversion. Phys Rev B. 1982; 25(7):4515–4532. Available from: 10.1103/PhysRevB.25.4515.

Top papers written in this journal

Journal Article DOI: 10.1533/IJCR.2004.0289
A comprehensive failure model for crashworthiness simulation of aluminium extrusions
H. Hooputra, H. Gese, H. Dell, H. Werner

Abstract:

A correct representation of the plastic deformation and failure of individual component parts is essential to obtaining accurate crashworthiness simulation results The aim of this paper is to present a comprehensive approach for predicting failure in a component based on macroscopic strains and stresses This approach requires... A correct representation of the plastic deformation and failure of individual component parts is essential to obtaining accurate crashworthiness simulation results The aim of this paper is to present a comprehensive approach for predicting failure in a component based on macroscopic strains and stresses This approach requires the use of a number of different failure mechanism representations, such as necking (due to local instabilities), as well as ductile and shear fracture All failure criteria have been developed in a way to include the influence of non-linear strain paths The effectiveness of this approach in predicting failure is then discussed by comparing numerical results with test data by three point bending and axial compression tests of double chamber extrusion components All studies presented in this paper were carried out on extrusions made from aluminium alloy EN AW-7108 T6 read more read less

Topics:

Crashworthiness (55%)55% related to the paper, Necking (55%)55% related to the paper, Deformation (engineering) (53%)53% related to the paper
550 Citations
Journal Article DOI: 10.1533/IJCR.2003.0243
The creation of three-dimensional finite element models for simulating head impact biomechanics
TJ Horgan1, Michael D. Gilchrist1

Abstract:

A new 3 dimensional finite element representation of the human head complex has been constructed for simulating the transient occurrences of simple pedestrian accidents. This paper describes the development, features and validation of that model. When constructing the model, emphasis was placed on element quality and ease of ... A new 3 dimensional finite element representation of the human head complex has been constructed for simulating the transient occurrences of simple pedestrian accidents. This paper describes the development, features and validation of that model. When constructing the model, emphasis was placed on element quality and ease of mesh generation. As such, a number of variations of the model were created. The model was validated against a series of cadaveric impact tests. A parametric study (a High/Low study) was performed to investigate the effect of the bulk and shear modulus of the brain and cerebrospinal fluid (CSF). The influence of different mesh densities on the models and the use of different element formulations for the skull were also investigated. It was found that the short-term shear modulus of the neural tissue had the predominant effect on intracranial frontal pressure, and on the predicted Von-Mises response. The bulk modulus of the fluid had a significant effect on the contre-coup pressure when the CSF was modelled using a coupled node definition. Differences of intracranial pressure were reported that show the sensitivity of the method by which the skull is modelled. By simulating an identical impact scenario with a range of different finite element models it has been possible to investigate the influence of model topologies. We can conclude that careful modelling of the CSF (depth/volume) and skull thickness (including cortical/ trabecular ratio) is necessary if the correct intracranial pressure distribution is to be predicted, and so further forms of validation are required to improve the finite element models' injury prediction capabilities. read more read less

Topics:

Finite element method (55%)55% related to the paper, Mesh generation (54%)54% related to the paper, Bulk modulus (51%)51% related to the paper, Poison control (51%)51% related to the paper
419 Citations
Journal Article DOI: 10.1533/IJCR.2005.0384
Evaluation of head injury criteria using a finite element model validated against experiments on localized brain motion, intracerebral acceleration, and intracranial pressure
Svein Kleiven1

Abstract:

The objective of the present study was to analyze the effect of different load directions and durations following impact using a finite element (FE) model of the human head. A detailed FE model of ... The objective of the present study was to analyze the effect of different load directions and durations following impact using a finite element (FE) model of the human head. A detailed FE model of ... read more read less

Topics:

Head injury criterion (52%)52% related to the paper
234 Citations
open accessOpen access Journal Article DOI: 10.1533/IJCR.2004.0299
Influence of FE model variability in predicting brain motion and intracranial pressure changes in head impact simulations
TJ Horgan, Michael D. Gilchrist1

Abstract:

In order to create a useful computational tool that will aid in the understanding and perhaps prevention of head injury, it is important to know the quantitative influence of the constitutive properties, geometry and model formulations of the intracranial contents upon the mechanics of a head impact event. The University Coll... In order to create a useful computational tool that will aid in the understanding and perhaps prevention of head injury, it is important to know the quantitative influence of the constitutive properties, geometry and model formulations of the intracranial contents upon the mechanics of a head impact event. The University College Dublin Brain Trauma Model (UCDBTM) [1] has been refined and validated against a series of cadaver tests and the influence of different model formulations has been investigated. In total six different model configurations were constructed: (i) the baseline model, (ii) a refined baseline model which explicitly differentiates between grey and white neural tissue, (iii) a model with three elements through the thickness of the cerebrospinal fluid (CSF) layer, (iv) a model simulating a sliding boundary, (v) a projection mesh model (which also distinguishes between neural tissue) and (vi) a morphed model. These models have been compared against cadaver tests of Trosseille [2] an... read more read less
View PDF
216 Citations
Journal Article DOI: 10.1533/IJCR.2003.0264
Human head tolerance limits to specific injury mechanisms

Abstract:

This study presents an original numerical human head model followed by there modal and temporal validation against human head vibration analysis in vivo and cadaver impact tests. The human head FE model developed by ULP presents two particularities : one at the brain-skull interface level were fluid-structure interaction is t... This study presents an original numerical human head model followed by there modal and temporal validation against human head vibration analysis in vivo and cadaver impact tests. The human head FE model developed by ULP presents two particularities : one at the brain-skull interface level were fluid-structure interaction is taken into account, the other at the skull modelling level by integrating the bone fracture simulation. Validation shows that the model correlated well with a number of experimental cadaver tests and predicted intra-cranial pressure accurately. However, for long duration impacts the model reaches its limits. The skull stiffness and fracture force were accurately predicted when compared with experimental values from the literature. This improved numerical human head surrogates has then be used for numerical real world accident reconstruction. Helmet damage from thirteen motorcycle accidents was replicated in drop tests in order to define the head's loading conditions. A total of twenty two well documented American football head trauma have been reconstructed as well as twenty eight pedestrian head impacts. By correlating head injury type and location with intra-cerebral mechanical field parameters, it was possible to derive new injury risk curves relative to specific injury mechanisms. read more read less

Topics:

Head trauma (59%)59% related to the paper, Head (vessel) (52%)52% related to the paper, Poison control (51%)51% related to the paper, Human head (51%)51% related to the paper, Head injury (50%)50% related to the paper
190 Citations
Author Pic

SciSpace is a very innovative solution to the formatting problem and existing providers, such as Mendeley or Word did not really evolve in recent years.

- Andreas Frutiger, Researcher, ETH Zurich, Institute for Biomedical Engineering

Get MS-Word and LaTeX output to any Journal within seconds
1
Choose a template
Select a template from a library of 40,000+ templates
2
Import a MS-Word file or start fresh
It takes only few seconds to import
3
View and edit your final output
SciSpace will automatically format your output to meet journal guidelines
4
Submit directly or Download
Submit to journal directly or Download in PDF, MS Word or LaTeX

(Before submission check for plagiarism via Turnitin)

clock Less than 3 minutes

What to expect from SciSpace?

Speed and accuracy over MS Word

''

With SciSpace, you do not need a word template for International Journal of Crashworthiness.

It automatically formats your research paper to Taylor and Francis formatting guidelines and citation style.

You can download a submission ready research paper in pdf, LaTeX and docx formats.

Time comparison

Time taken to format a paper and Compliance with guidelines

Plagiarism Reports via Turnitin

SciSpace has partnered with Turnitin, the leading provider of Plagiarism Check software.

Using this service, researchers can compare submissions against more than 170 million scholarly articles, a database of 70+ billion current and archived web pages. How Turnitin Integration works?

Turnitin Stats
Publisher Logos

Freedom from formatting guidelines

One editor, 100K journal formats – world's largest collection of journal templates

With such a huge verified library, what you need is already there.

publisher-logos

Easy support from all your favorite tools

International Journal of Crashworthiness format uses Taylor and Francis Custom Citation citation style.

Automatically format and order your citations and bibliography in a click.

SciSpace allows imports from all reference managers like Mendeley, Zotero, Endnote, Google Scholar etc.

Frequently asked questions

1. Can I write International Journal of Crashworthiness in LaTeX?

Absolutely not! Our tool has been designed to help you focus on writing. You can write your entire paper as per the International Journal of Crashworthiness guidelines and auto format it.

2. Do you follow the International Journal of Crashworthiness guidelines?

Yes, the template is compliant with the International Journal of Crashworthiness guidelines. Our experts at SciSpace ensure that. If there are any changes to the journal's guidelines, we'll change our algorithm accordingly.

3. Can I cite my article in multiple styles in International Journal of Crashworthiness?

Of course! We support all the top citation styles, such as APA style, MLA style, Vancouver style, Harvard style, and Chicago style. For example, when you write your paper and hit autoformat, our system will automatically update your article as per the International Journal of Crashworthiness citation style.

4. Can I use the International Journal of Crashworthiness templates for free?

Sign up for our free trial, and you'll be able to use all our features for seven days. You'll see how helpful they are and how inexpensive they are compared to other options, Especially for International Journal of Crashworthiness.

5. Can I use a manuscript in International Journal of Crashworthiness that I have written in MS Word?

Yes. You can choose the right template, copy-paste the contents from the word document, and click on auto-format. Once you're done, you'll have a publish-ready paper International Journal of Crashworthiness that you can download at the end.

6. How long does it usually take you to format my papers in International Journal of Crashworthiness?

It only takes a matter of seconds to edit your manuscript. Besides that, our intuitive editor saves you from writing and formatting it in International Journal of Crashworthiness.

7. Where can I find the template for the International Journal of Crashworthiness?

It is possible to find the Word template for any journal on Google. However, why use a template when you can write your entire manuscript on SciSpace , auto format it as per International Journal of Crashworthiness's guidelines and download the same in Word, PDF and LaTeX formats? Give us a try!.

8. Can I reformat my paper to fit the International Journal of Crashworthiness's guidelines?

Of course! You can do this using our intuitive editor. It's very easy. If you need help, our support team is always ready to assist you.

9. International Journal of Crashworthiness an online tool or is there a desktop version?

SciSpace's International Journal of Crashworthiness is currently available as an online tool. We're developing a desktop version, too. You can request (or upvote) any features that you think would be helpful for you and other researchers in the "feature request" section of your account once you've signed up with us.

10. I cannot find my template in your gallery. Can you create it for me like International Journal of Crashworthiness?

Sure. You can request any template and we'll have it setup within a few days. You can find the request box in Journal Gallery on the right side bar under the heading, "Couldn't find the format you were looking for like International Journal of Crashworthiness?”

11. What is the output that I would get after using International Journal of Crashworthiness?

After writing your paper autoformatting in International Journal of Crashworthiness, you can download it in multiple formats, viz., PDF, Docx, and LaTeX.

12. Is International Journal of Crashworthiness's impact factor high enough that I should try publishing my article there?

To be honest, the answer is no. The impact factor is one of the many elements that determine the quality of a journal. Few of these factors include review board, rejection rates, frequency of inclusion in indexes, and Eigenfactor. You need to assess all these factors before you make your final call.

13. What is Sherpa RoMEO Archiving Policy for International Journal of Crashworthiness?

SHERPA/RoMEO Database

We extracted this data from Sherpa Romeo to help researchers understand the access level of this journal in accordance with the Sherpa Romeo Archiving Policy for International Journal of Crashworthiness. The table below indicates the level of access a journal has as per Sherpa Romeo's archiving policy.

RoMEO Colour Archiving policy
Green Can archive pre-print and post-print or publisher's version/PDF
Blue Can archive post-print (ie final draft post-refereeing) or publisher's version/PDF
Yellow Can archive pre-print (ie pre-refereeing)
White Archiving not formally supported
FYI:
  1. Pre-prints as being the version of the paper before peer review and
  2. Post-prints as being the version of the paper after peer-review, with revisions having been made.

14. What are the most common citation types In International Journal of Crashworthiness?

The 5 most common citation types in order of usage for International Journal of Crashworthiness are:.

S. No. Citation Style Type
1. Author Year
2. Numbered
3. Numbered (Superscripted)
4. Author Year (Cited Pages)
5. Footnote

15. How do I submit my article to the International Journal of Crashworthiness?

It is possible to find the Word template for any journal on Google. However, why use a template when you can write your entire manuscript on SciSpace , auto format it as per International Journal of Crashworthiness's guidelines and download the same in Word, PDF and LaTeX formats? Give us a try!.

16. Can I download International Journal of Crashworthiness in Endnote format?

Yes, SciSpace provides this functionality. After signing up, you would need to import your existing references from Word or Bib file to SciSpace. Then SciSpace would allow you to download your references in International Journal of Crashworthiness Endnote style according to Elsevier guidelines.

Fast and reliable,
built for complaince.

Instant formatting to 100% publisher guidelines on - SciSpace.

Available only on desktops 🖥

No word template required

Typset automatically formats your research paper to International Journal of Crashworthiness formatting guidelines and citation style.

Verifed journal formats

One editor, 100K journal formats.
With the largest collection of verified journal formats, what you need is already there.

Trusted by academicians

I spent hours with MS word for reformatting. It was frustrating - plain and simple. With SciSpace, I can draft my manuscripts and once it is finished I can just submit. In case, I have to submit to another journal it is really just a button click instead of an afternoon of reformatting.

Andreas Frutiger
Researcher & Ex MS Word user
Use this template