Showing papers in "arXiv: Classical Physics in 2012"
TL;DR: In this article, the authors synthesize the various works carried out on electrostatic devices, from concepts, models and up to prototypes, and cover both standard (electret-free) and electret-based electrostatic vibration energy harvesters (VEH).
Abstract: This chapter focuses on vibration energy harvesting using electrostatic converters. It synthesizes the various works carried out on electrostatic devices, from concepts, models and up to prototypes, and covers both standard (electret-free) and electret-based electrostatic vibration energy harvesters (VEH).
198 citations
TL;DR: In this paper, the authors considered single-layer arrays of electrically small lossy bi-anisotropic particles that completely absorb electromagnetic waves at normal incidence, and the design possibilities offered by the particles of all four fundamental classes of bianisotropic inclusions: reciprocal chiral and omega particles and non-reciprocal Tellegen and moving particles.
Abstract: We consider single-layer arrays of electrically small lossy bi-anisotropic particles that completely absorb electromagnetic waves at normal incidence. Required conditions for electromagnetic properties of bi-anisotropic particles have been identified in the most general case of uniaxial reciprocal and nonreciprocal particles. We consider the design possibilities offered by the particles of all four fundamental classes of bianisotropic inclusions: reciprocal chiral and omega particles and nonreciprocal Tellegen and moving particles. We also study the reflection/transmission properties of asymmetric structures with different properties when illuminated from the opposite sides of the sheet. It has been found that it is possible to realize single-layer grids which exhibit the total absorption property when illuminated from one side but are totally transparent when illuminated from the other side (an ultimately thin isolator). Other possible properties are co-polarized or twist polarized reflection from the side opposite to the absorbing one. Finally, we discuss possible approaches to practical realization of particles with the properties required for single-layer perfect absorbers and other proposed devices.
117 citations
TL;DR: In this paper, a cylindrical shell-type waveguide is constructed to create a stopband for the seismic wave, which converts the wave into an evanescent wave for some frequency range without touching the building.
Abstract: We have developed a new method of an earthquake-resistant design to support conventional aseismic designs using acoustic metamaterials. We suggest a simple and practical method to reduce the amplitude of a seismic wave exponentially. Our device is an attenuator of a seismic wave. Constructing a cylindrical shell-type waveguide that creates a stop-band for the seismic wave, we convert the wave into an evanescent wave for some frequency range without touching the building we want to protect.
73 citations
TL;DR: In this article, it was shown that nonlinear elastic pre-stress of hyperelastic materials can be used as a mechanism to generate finite cloaks and render objects near-invisible to incoming antiplane elastic waves.
Abstract: It is shown that nonlinear elastic pre-stress of neo-Hookean hyperelastic materials can be used as a mechanism to generate finite cloaks and thus render objects near-invisible to incoming antiplane elastic waves. This approach appears to negate the requirement for special cloaking metamaterials with inhomogeneous and anisotropic material properties in this case. These properties are induced naturally by virtue of the pre-stress. This appears to provide a mechanism for broadband cloaking since dispersive effects due to metamaterial microstructure will not arise.
60 citations
TL;DR: In this paper, an interdisciplinary review of the generalized Cerenkov emission of radiation from uniformly moving sources in the different contexts of classical electromagnetism, superfluid hydrodynamics, and classical hydroynamics is presented.
Abstract: We present an interdisciplinary review of the generalized Cerenkov emission of radiation from uniformly moving sources in the different contexts of classical electromagnetism, superfluid hydrodynamics, and classical hydrodynamics. The details of each specific physical systems enter our theory via the dispersion law of the excitations. A geometrical recipe to obtain the emission patterns in both real and wavevector space from the geometrical shape of the dispersion law is discussed and applied to a number of cases of current experimental interest. Some consequences of these emission processes onto the stability of condensed-matter analogs of gravitational systems are finally illustrated.
38 citations
TL;DR: It is shown that geometrical schemes are as much robust and accurate as Fourier-type pseudospectral methods for computing the long-time KdV dynamics, and thus more suitable to model complex nonlinear wave phenomena.
Abstract: Geometric discretizations that preserve certain Hamiltonian structures at the discrete level has been proven to enhance the accuracy of numerical schemes. In particular, numerous symplectic and multi-symplectic schemes have been proposed to solve numerically the celebrated Korteweg-de Vries (KdV) equation. In this work, we show that geometrical schemes are as much robust and accurate as Fourier-type pseudo-spectral methods for computing the long-time KdV dynamics, and thus more suitable to model complex nonlinear wave phenomena.
33 citations
TL;DR: In this paper, a purely numerical methodology is presented, with which the limitations usually associated with low scatterer concentrations can be avoided, and an immersed interface method is used to accurately discretize the interfaces on a Cartesian grid.
Abstract: Elastic wave propagation is studied in a heterogeneous 2-D medium consisting of an elastic matrix containing randomly distributed circular elastic inclusions. The aim of this study is to determine the effective wavenumbers when the incident wavelength is similar to the radius of the inclusions. A purely numerical methodology is presented, with which the limitations usually associated with low scatterer concentrations can be avoided. The elastodynamic equations are integrated by a fourth-order time-domain numerical scheme. An immersed interface method is used to accurately discretize the interfaces on a Cartesian grid. The effective field is extracted from the simulated data, and signal-processing tools are used to obtain the complex effective wavenumbers. The numerical reference solution thus-obtained can be used to check the validity of multiple scattering analytical models. The method is applied to the case of concrete. A parametric study is performed on longitudinal and transverse incident plane waves at various scatterers concentrations. The phase velocities and attenuations determined numerically are compared with predictions obtained with multiple scattering models, such as the Independent Scattering Approximation model, the Waterman-Truell model, and the more recent Conoir-Norris model.
28 citations
Posted Content•
TL;DR: In this paper, the relation between the normal coefficient of restitution e and the incident velocity v is compared between experiments and models, and a broad comparison of experiments and model is drawn.
Abstract: The central collision between two solid spheres or the normal collision between a sphere and a plate are important to understand in detail before studying more complex particle interactions Models exist to describe this basic problem but are not always consistent with available experiments An interesting benchmark to compare models and experiments is the relation between the normal coefficient of restitution e and the incident velocity v In order to draw a broad comparison between experiments and models (Krijt, S, Guttler, C, Heiselmann, D, Tielens, AGGM, Dominik, C, Energy dissipation in head-on collisions of spheres, submitted), we provide in this article an overview on the literature describing experiments on normal collisions, preferably providing data on e(v) We will briefly summarize our expectation on this relation according to an established collision model in order to classify these experiments We will then provide an overview on experimental techniques, which we found in the summarized articles, as well as a listing of all experiments along with a description of the main features of these The raw data on e(v) of the listed experiments were digitized and are provided with this article
26 citations
TL;DR: A brief summary of major formulations of the third law of thermodynamics and their implications, including the impossibility of perpetual motion, can be found in this paper, where a strategy for teaching the law to engineering and science students is discussed.
Abstract: This work gives a brief summary of major formulations of the third law of thermodynamics and their implications, including the impossibility of perpetual motion of the third kind. The last sections of this work review more advanced applications of the third law to systems with negative temperatures and negative heat capacities. The relevance of the third law to protecting the arrow of time in general relativity is also discussed. Additional information, which may useful in analysis of the third law, is given in the Appendices.
This short review is written to assist lecturers in selecting a strategy for teaching the third law of thermodynamics to engineering and science students. The paper provides a good summary of the various issues associated with the third law, which are typically scattered over numerous research publications and not discussed in standard textbooks.
26 citations
TL;DR: In this paper, the authors introduce the fundamentals of spur and helical gear dynamics using three-dimensional lumped models and a thin-slice approach for mesh elasticity, the general equations of motion for single-stage spur or helical gears are presented.
Abstract: This chapter is aimed at introducing the fundamentals of spur and helical gear dynamics. Using three-dimensional lumped models and a thin-slice approach for mesh elasticity, the general equations of motion for single-stage spur or helical gears are presented. Some particular cases including the classic one degree-of-freedom model are examined in order to introduce and illustrate the basic phenomena. The interest of the concept of transmission errors is analysed and a number of practical considerations are deduced. Emphasis is deliberately placed on analytical results which, although approximate, allow a clearer understanding of gear dynamics than that provided by extensive numerical simulations. Some extensions towards continuous models are presented.
23 citations
TL;DR: In this paper, an isothermal numerical model has been developed which describes the mechanical interaction between the deformations of the porous medium and the resin flow during infusion, and a comparison between numerical simulations and an experimental study of a plate infusion test carried out by LRI process under industrial conditions.
Abstract: Liquid resin infusion (LRI) processes are promising manufacturing routes to produce large, thick, or complex structural parts. They are based on the resin flow induced, across its thickness, by a pressure applied onto a preform/resin stacking. However, both thickness and fiber volume fraction of the final piece are not well controlled since they result from complex mechanisms which drive the transient mechanical equilibrium leading to the final geometrical configuration. In order to optimize both design and manufacturing parameters, but also to monitor the LRI process, an isothermal numerical model has been developed which describes the mechanical interaction between the deformations of the porous medium and the resin flow during infusion.1, 2 With this numerical model, it is possible to investigate the LRI process of classical industrial part shapes. To validate the numerical model, first in 2D, and to improve the knowledge of the LRI process, this study details a comparison between numerical simulations and an experimental study of a plate infusion test carried out by LRI process under industrial conditions. From the numerical prediction, the filling time, the resin mass and the thickness of the preform can be determined. On another hand, the resin flow and the preform response can be monitored by experimental methods during the filling stage. One key issue of this research study is to highlight the changes in major process parameters during the resin infusion stage, such as the temperature of the preform and resin, and the variations of both thickness and fiber volume fraction of the preform. Moreover, this numerical/experimental approach is the best way to improve our knowledge on the resin infusion processes, and finally, to develop simulation tools for the design of advanced composite parts.
TL;DR: In this paper, it was shown that the absorption line is broadened by geometric longitudinal first order Doppler shifts and non-Lorenzian absorption lines are obtained for any angular velocity of the absorber.
Abstract: The Einstein time dilation formula was tested in several experiments Many trials have been made to measure the transverse second order Doppler shift by M\"{o}ssbauer spectroscopy using a rotating absorber, to test the validity of this formula Such experiments are also able to test if the time dilation depends only on the velocity of the absorber, as assumed by Einstein's clock hypothesis, or the present centripetal acceleration contributes to the time dilation We show here that the fact that the experiment requires $\gamma$-ray emission and detection slits of finite size, the absorption line is broadened; by geometric longitudinal first order Doppler shifts immensely Moreover, the absorption line is non-Lorenzian We obtain an explicit expression for the absorption line for any angular velocity of the absorber
The analysis of the experimental results, in all previous experiments which did not observe the full absorption line itself, were wrong and the conclusions doubtful The only proper experiment was done by K\"{u}ndig (Phys Rev 129 (1963) 2371), who observed the broadening, but associated it to random vibrations of the absorber We establish necessary conditions for the successful measurement of a transverse second order Doppler shift by M\"{o}ssbauer spectroscopy We indicate how the results of such an experiment can be used to verify the existence of a Doppler shift due to acceleration and to test the validity of Einstein's clock hypothesis
TL;DR: In this paper, the velocity and pressure of an ultrasonic wave can be measured by an electromagnetic hydrophone made of a thin wire and a magnet, which vibrates the wire inside a magnetic field, inducing an electrical current.
Abstract: The velocity and pressure of an ultrasonic wave can be measured by an electromagnetic hydrophone made of a thin wire and a magnet. The ultrasonic wave vibrates the wire inside a magnetic field, inducing an electrical current. Previous articles reported poor spatial resolution of comparable hydrophones along the axis of the wire. In this study, submillimetric spatial resolution has been achieved by using a tomographic method. Moreover, a physical model is presented for obtaining absolute measurements. A pressure differential of 8% has been found between piezoelectric and electromagnetic hydrophone measurements. These characteristics show this technique as an alternative to standard hydrophones.
TL;DR: In this article, the classical dynamics of three non-relativistic Coulomb charges on the plane placed in a constant magnetic field perpendicular to the plane is considered and special trajectories for which the distances between the charges remain unchanged are presented and their corresponding integrals of motion are indicated.
Abstract: As a generalization and extension of JMP 54 (2013) 022901, the classical dynamics of three non-relativistic Coulomb charges $(e_1, m_1)$, $(e_2, m_2)$ and $(e_3, m_3)$ on the plane placed in a constant magnetic field perpendicular to the plane is considered. Special trajectories for which the distances between the charges remain unchanged are presented and their corresponding integrals of motion are indicated. For these special trajectories the number of integrals of motion is larger than the dimension of the configuration space and hence they can be called \emph{particularly superintegrable}. Three physically relevant cases are analyzed in detail, namely that of three electrons, a neutral system and a Helium-like system. The $n$-body case is discussed as well.
TL;DR: In this article, a perturbed version of the compact integrability of the Zakharov integro-differential equation for the third order Hamiltonian dynamics of a potential flow of an incompressible, infinitely deep fluid with a free surface was derived.
Abstract: Recently, Dyachenko & Zakharov (2011) have derived a compact form of the well known Zakharov integro-differential equation for the third order Hamiltonian dynamics of a potential flow of an incompressible, infinitely deep fluid with a free surface. Special traveling wave solutions of this compact equation are numerically constructed using the Petviashvili method. Their stability properties are also investigated. Further, unstable traveling waves with wedge-type singularities, viz. peakons, are numerically discovered. To gain insights into the properties of singular traveling waves, we consider the academic case of a perturbed version of the compact equation, for which analytical peakons with exponential shape are derived. Finally, by means of an accurate Fourier-type spectral scheme it is found that smooth solitary waves appear to collide elastically, suggesting the integrability of the Zakharov equation.
TL;DR: In this paper, it is shown that the use of the Riemann-Silberstein (RS) vector greatly simplifies the description of the electromagnetic field both in the classical domain and in the quantum domain.
Abstract: It is shown that the use of the Riemann-Silberstein (RS) vector greatly simplifies the description of the electromagnetic field both in the classical domain and in the quantum domain. In this review we describe many specific examples where this vector enables one to significantly shorten the derivations and make them more transparent. We also argue why the RS vector may be considered as the best possible choice for the photon wave function.
TL;DR: In this article, the relativistic point-charge model for a magnetic moment is discussed and Mansuripur's claims of incompatibiltiy between the Lorentz force and relativity are seen to be invalid.
Abstract: Recently Mansuripur has called into question the validity of the Lorentz force in connection with relativistic electromagnetic theory. Here we present some very simple point-charge systems treated through order v^{2}/c^{2} in order to clarify some aspects of relativistic controversies both old and new. In connection with the examples, we confirm the validity of the relativistic conservation laws. The relativistic examples make clear that external forces may produce a vanishing torque in one inertial frame and yet produce a non-zero torque in another inertial frame, and that the conservation of angular momentum will hold in both frames. We also discuss a relativistic point-charge model for a magnetic moment and comment on the interaction of a point charge and a magnetic moment. Mansuripur's claims of incompatibiltiy between the Lorentz force and relativity are seen to be invalid.
TL;DR: In this article, the rotational motion of a rigid body having two equal principal moments of inertia and subjected to an external torque which is constant in magnitude is derived for any motion time length and rotation amplitude.
Abstract: New exact analytic solutions are introduced for the rotational motion of a rigid body having two equal principal moments of inertia and subjected to an external torque which is constant in magnitude. In particular, the solutions are obtained for the following cases: (1) Torque parallel to the symmetry axis and arbitrary initial angular velocity; (2) Torque perpendicular to the symmetry axis and such that the torque is rotating at a constant rate about the symmetry axis, and arbitrary initial angular velocity; (3) Torque and initial angular velocity perpendicular to the symmetry axis, with the torque being fixed with the body. In addition to the solutions for these three forced cases, an original solution is introduced for the case of torque-free motion, which is simpler than the classical solution as regards its derivation and uses the rotation matrix in order to describe the body orientation. This paper builds upon the recently discovered exact solution for the motion of a rigid body with a spherical ellipsoid of inertia. In particular, by following Hestenes' theory, the rotational motion of an axially symmetric rigid body is seen at any instant in time as the combination of the motion of a "virtual" spherical body with respect to the inertial frame and the motion of the axially symmetric body with respect to this "virtual" body. The kinematic solutions are presented in terms of the rotation matrix. The newly found exact analytic solutions are valid for any motion time length and rotation amplitude. The present paper adds further elements to the small set of special cases for which an exact solution of the rotational motion of a rigid body exists.
Posted Content•
TL;DR: In this article, the effect of a time-varying blowing pressure on the behavior of a simplified clarinet model is investigated analytically, and a theoretical estimation of the dynamic oscillation threshold is proposed and compared with numerical simulations.
Abstract: Reed instruments are modeled as self-sustained oscillators driven by the pressure inside the mouth of the musician. A set of nonlinear equations connects the control parameters (mouth pressure, lip force) to the system output, hereby considered as the mouthpiece pressure. Clarinets can then be studied as dynamical systems, their steady behavior being dictated uniquely by the values of the control parameters. Considering the resonator as a lossless straight cylinder is a dramatic yet common simplification that allows for simulations using nonlinear iterative maps. In this paper, we investigate analytically the effect of a time-varying blowing pressure on the behavior of this simplified clarinet model. When the control parameter varies, results from the so-called dynamic bifurcation theory are required to properly analyze the system. This study highlights the phenomenon of bifurcation delay and defines a new quantity, the dynamic oscillation threshold. A theoretical estimation of the dynamic oscillation threshold is proposed and compared with numerical simulations.
TL;DR: In this article, the so-called self attraction effect (SAE) is calculated using a numerical method based on FEM simulation, and the observed effect has been treated as an additional vertical gravity gradient.
Abstract: The perturbations of the gravitational field due to the mass distribution of an absolute gravimeter have been studied. The so called Self Attraction Effect (SAE) is crucial for the measurement accuracy, especially for the International Comparisons, and for the uncertainty budget evaluation. Three instruments have been analysed: MPG-2, FG5-238 and IMPG-02. The SAE has been calculated using a numerical method based on FEM simulation. The observed effect has been treated as an additional vertical gravity gradient. The correction (SAC) to be applied to the computed g value has been associated with the specific height level, where the measurement result is typically reported. The magnitude of the obtained corrections is of order 1E-8 m/s2.
TL;DR: A set of 55 clarinet reeds is observed by holography, collecting two series of measurements made under 2 different moisture contents, from which the resonance frequencies of the 15 first modes are deduced.
Abstract: A set of 55 clarinet reeds is observed by holography, collecting 2 series of measurements made under 2 different moisture contents, from which the resonance frequencies of the 15 first modes are deduced A statistical analysis of the results reveals good correlations, but also significant differences between both series Within a given series, flexural modes are not strongly correlated A Principal Component Analysis (PCA) shows that the measurements of each series can be described with 3 factors capturing more than $90\%$ of the variance: the first is linked with transverse modes, the second with flexural modes of high order and the third with the first flexural mode A forth factor is necessary to take into account the individual sensitivity to moisture content Numerical 3D simulations are conducted by Finite Element Method, based on a given reed shape and an orthotropic model A sensitivity analysis revels that, besides the density, the theoretical frequencies depend mainly on 2 parameters: $E_L$ and $G_{LT}$ An approximate analytical formula is proposed to calculate the resonance frequencies as a function of these 2 parameters The discrepancy between the observed frequencies and those calculated with the analytical formula suggests that the elastic moduli of the measured reeds are frequency dependent A viscoelastic model is then developed, whose parameters are computed as a linear combination from 4 orthogonal components, using a standard least squares fitting procedure and leading to an objective characterization of the material properties of the cane \textit{Arundo donax}
Posted Content•
TL;DR: It is shown that the self induction of a wire loop may be written as a curve integral akin to the Neumann formula for the mutual inductance of two wire loops, with only difference that contributions where the two integration variables get too close to each other must be excluded.
Abstract: It is shown that the self inductance of a wire loop may be written as a curve integral akin to the Neumann formula for the mutual inductance of two wire loops The only difference is that contributions where the two integration variables get too close to each other must be excluded from the curve integral and evaluated in detail The contributions of these excluded segments depend on the distribution of the current in the cross section of the wire They add to a simple constant proportional to the wire length The error of the new expression is of first order in the wire radius if there are sharp corners and of second order in the wire radius for smooth wire loops
TL;DR: In this paper, the authors present an analytical solution for the motion of a bead on a driven hoop for arbitrary initial conditions and parameter values, and show that the solution is complete.
Abstract: Jacobi elliptic functions are flexible functions that appear in a variety of problems in physics and engineering. We introduce and describe important features of these functions and present a physical example from classical mechanics where they appear: a bead on a spinning hoop. We determine the complete analytical solution for the motion of a bead on the driven hoop for arbitrary initial conditions and parameter values.
Posted Content•
TL;DR: In this paper, the Shannon entropy of suitably preprocessed Fourier spectra is used to tune a musical instrument such as a pianos to reproduce the correct stretch curve and similar pitch fluctuations.
Abstract: The human sense of hearing perceives a combination of sounds 'in tune' if the corresponding harmonic spectra are correlated, meaning that the neuronal excitation pattern in the inner ear exhibits some kind of order. Based on this observation it is suggested that musical instruments such as pianos can be tuned by minimizing the Shannon entropy of suitably preprocessed Fourier spectra. This method reproduces not only the correct stretch curve but also similar pitch fluctuations as in the case of high-quality aural tuning.
TL;DR: In this article, an analytic solution for the rotational motion of a rigid body having three equal principal moments of inertia and subjected to an external torque vector which is constant for an observer fixed with the body, and to an arbitrary initial angular velocity is introduced.
Abstract: The exact analytic solution is introduced for the rotational motion of a rigid body having three equal principal moments of inertia and subjected to an external torque vector which is constant for an observer fixed with the body, and to arbitrary initial angular velocity. In the paper a parametrization of the rotation by three complex numbers is used. In particular, the rows of the rotation matrix are seen as elements of the unit sphere and projected, by stereographic projection, onto points on the complex plane. In this representation, the kinematic differential equation reduces to an equation of Riccati type, which is solved through appropriate choices of substitutions, thereby yielding an analytic solution in terms of confluent hypergeometric functions. The rotation matrix is recovered from the three complex rotation variables by inverse stereographic map. The results of a numerical experiment confirming the exactness of the analytic solution are reported. The newly found analytic solution is valid for any motion time length and rotation amplitude. The present paper adds a further element to the small set of special cases for which an exact solution of the rotational motion of a rigid body exists.
TL;DR: In this paper, it was shown that for an appropriate definition of incompressibility, as a limiting case of quasi thermal-incompressible body, the entropy principle holds for pressures smaller than a critical pressure value.
Abstract: In his monograph Thermodynamics, I. M\"uller proves that for incompressible media the volume does not change with the temperature. This M\"uller paradox yields an incompatibility between experimental evidence and the entropy principle. This result has generated much debate within the mathematical and thermodynamical communities as to the basis of Boussinesq approximation in fluid dynamics. The aim of this paper is to prove that for an appropriate definition of incompressibility, as a limiting case of quasi thermal-incompressible body, the entropy principle holds for pressures smaller than a critical pressure value. The main consequence of our result is the physically obvious one, that for very large pressures, no body can be perfectly incompressible. The result is first established in the fluid case. In the case of hyperelastic media subject to large deformations the approach is similar, but with a suitable definition of the pressure associated with convenient stress tensor decomposition.
TL;DR: In this paper, the use of matrix mechanics to solve three dimensional problems involving central forces is discussed, such as the Coulomb interaction, the Yukawa potential, and a number of others.
Abstract: Matrix mechanics is an important component of an undergraduate education in quantum mechanics. In this paper we present several examples of the use of matrix mechanics to solve for a number of three dimensional problems involving central forces. These include examples with which the student is familiar, such as the Coulomb interaction. In this case we obtain excellent agreement with exact analytical methods. More importantly, other interesting `non-solvable' examples, such as the Yukawa potential, can be solved as well. Much less mathematical expertise is required for these methods, while some minimal familiarity with the usage of numerical diagonalization software is necessary.
TL;DR: In this paper, a model of an object composed of three orthogonal chiral particles made of conducting wire is presented as an analog of the zero-backscattering bi-isotropic sphere and a potential application of the object as a receiving antenna or a sensor with the ability to receive power from an arbitrary direction without backscattering is discussed.
Abstract: In this paper we study electrically small chiral objects with isotropic response and zero backscattering. A bi-isotropic sphere is used as a simple example and its zero-backscattering conditions are studied. A theoretical model of an object composed of three orthogonal chiral particles made of conducting wire is presented as an analog of the zero-backscattering bi-isotropic sphere. A potential application of the object as a receiving antenna or a sensor with the ability to receive power from an arbitrary direction without backscattering is discussed.
TL;DR: In this paper, the Poynting vector and the rate of flow of energy were analyzed in a ring-shaped circuit with a battery of negligible size and a wire of uniform resistance, and the authors showed that the total power generated by the battery equals the energy flowing into the wire per unit time.
Abstract: A circuit is considered in the shape of a ring, with a battery of negligible size and a wire of uniform resistance. A linear charge distribution along the wire maintains an electrostatic field and a steady current, which produces a constant magnetic field. Earlier studies of the Poynting vector and the rate of flow of energy considered only idealized geometries in which the Poynting vector was confined to the space within the circuit. But in more realistic cases the Poynting vector is nonzero outside as well as inside the circuit. An expression is obtained for the Poynting vector in terms of products of integrals, which are evaluated numerically to show the energy flow. Limiting expressions are obtained analytically. It is shown that the total power generated by the battery equals the energy flowing into the wire per unit time.
TL;DR: In this paper, the authors re-examine the Abraham-Minkowski controversy and show that the Abraham expression is highly favored for the force exerted on a dielectric material by an electromagnetic field.
Abstract: The problem of assigning a momentum to an electromagnetic wave packet propagating inside an insulator has become known under the name of the Abraham-Minkowski controversy. In the present paper we re-examine the question, first through a power expansion in the polarizability of the medium and assuming the simplest and most natural choice for the force exerted on a dielectric material by an electromagnetic field. It is shown that the Abraham expression is highly favoured. We then show the complete generality of these results.