Showing papers in "arXiv: Materials Science in 1999"
TL;DR: In this article, the role of spontaneous and piezoelectric polarization in determining built-in fields in III-V nitride nanostructures has been investigated and clarified.
Abstract: Macroscopic polarization plays a major role in determining the optical and electrical properties of nitride nanostructures via polarization-induced built-in electrostatic fields. While currently fashionable, this field of endeavour is still by far in its early infancy. Here we contribute some clarifications on the conceptual issues involved in determining built-in fields in III-V nitride nanostructures, sorting out in particular the roles of spontaneous and piezoelectric polarization.
244 citations
TL;DR: In this article, the ground-state polarization of PbTiO3 thin films was studied using a microscopic effective Hamiltonian with parameters obtained from first-principles calculations.
Abstract: The ground-state polarization of PbTiO3 thin films is studied using a microscopic effective Hamiltonian with parameters obtained from first-principles calculations. Under short-circuit electrical boundary conditions, (001) films with thickness as low as three unit cells are found to have a perpendicularly polarized ferroelectric ground state with significant enhancement of the polarization at the surface.
190 citations
TL;DR: Ab initio computational methods are used to investigate the effect of a trefoil knot on the breaking strength of a polymer strand and find that the knot weakens the strand significantly, and that, like a knotted rope, it breaks under tension at the entrance to the knot.
Abstract: Many experiments have been done to determine the relative strength of different knots, and these show that the break in a knotted rope almost invariably occurs at a point just outside the `entrance' to the knot. The influence of knots on the properties of polymers has become of great interest, in part because of their effect on mechanical properties. Knot theory applied to the topology of macromolecules indicates that the simple trefoil or `overhand' knot is likely to be present with high probability in any long polymer strand. Fragments of DNA have been observed to contain such knots in experiments and computer simulations. Here we use {\it ab initio} computational methods to investigate the effect of a trefoil knot on the breaking strength of a polymer strand. We find that the knot weakens the strand significantly, and that, like a knotted rope, it breaks under tension at the entrance to the knot.
186 citations
TL;DR: In this paper, the authors derived a unified model to describe photo absorption and photon scattering by a plasma or a liquid metal in a unified manner with each other, and provided an analysis method for experiments observing the ion-ion dynamical structure factor (DSF), the electron-electron DSF giving plasma oscillations, and the core-electricity DSF yielding the X-ray Raman (Compton) scattering with a clear definition of the background scattering for each experiment.
Abstract: Formulas to describe the photoabsorption and the photon scattering by a plasma or a liquid metal are derived in a unified manner with each other. It is shown how the nuclear motion, the free-electron motion and the core-electron behaviour in each ion in the system determine the structure of photoabsorption and scattering in an electron-ion mixture. The absorption cross section in the dipole approximation consists of three terms which represent the absorption caused by the nuclear motion, the absorption owing to the free-electron motion producing optical conductivity or inverse Bremsstrahlung, and the absorption ascribed to the core-electron behaviour in each ion with the Doppler correction. Also, the photon scattering formula provides an analysis method for experiments observing the ion-ion dynamical structure factor (DSF), the electron-electron DSF giving plasma oscillations, and the core-electron DSF yielding the X-ray Raman (Compton) scattering with a clear definition of the background scattering for each experiment, in a unified manner. A formula for anomalous X-ray scattering is also derived for a liquid metal. At the same time, Thomson scattering in plasma physics is discussed from this general point of view.
135 citations
Posted Content•
TL;DR: In this paper, the authors compared the accuracy of different equation-of-state formulations for theoretical total energies or experimental pressure-volume measurements for H$ 2, Ne, Pt, and Ta.
Abstract: The accuracy of equation-of-state formulations is compared for theoretical total energies or experimental pressure-volume measurements for H$_{2}$, Ne, Pt, and Ta. This spans the entire range of compression found for minerals and vo latiles in the Earth. The Vinet equation is found to be most accurate. The origin of the behavior of different equation-of-state formulations is discussed. It is shown that subtle phase transitions can be detected by examining the residuals from an equation-of-state fit. A change in the electronic structure of Ta is found at high pressures using this procedure, and a possible new transition in H$_{2}$.
135 citations
TL;DR: In this article, a microscopic model for nanoparticles, composed of a core and a surface shell of constant thickness, is presented, where the magnetic state in the particle is described by the anisotropic classical Dirac-Heisenberg model including exchange and dipolar interactions and bulk and surface anisotropy.
Abstract: We present a microscopic model for nanoparticles, of the maghemite ($\gamma $% -Fe$_{2}$O$_{3}$) type, and perform classical Monte Carlo simulations of their magnetic properties. On account of M\"{o}ssbauer spectroscopy and high-field magnetisation results, we consider a particle as composed of a core and a surface shell of constant thickness. The magnetic state in the particle is described by the anisotropic classical Dirac-Heisenberg model including exchange and dipolar interactions and bulk and surface anisotropy. We consider the case of ellipsoidal (or spherical) particles with free boundaries at the surface. Using a surface shell of constant thickness ($\sim 0.35$ nm) we vary the particle size and study the effect of surface magnetic disorder on the thermal and spatial behaviors of the net magnetisation of the particle. We study the shift in the surface ``critical region'' for different surface-to-core ratios of the exchange coupling constants. It is also shown that the profile of the local magnetisation exhibits strong temperature dependence, and that surface anisotropy is reponsible for the non saturation of the magnetisation at low temperatures.
118 citations
TL;DR: In this paper, a phase diagram for (1-x}Ca{x}){1-y}\square{y}MnO{3} (0.1
Abstract: Oriented, single phase thin films of La_{1-x}Ca_{x}MnO_{3} have been deposited onto (100)-oriented LaAlO_{3} (0.1
96 citations
Posted Content•
TL;DR: In this article, a gold nanowire made of a four-atom chain supported by two gold electrodes, which has been imaged recently by high-resolution electron microscopy, and chemical modification of the wire via the adsorption of a methylthiol molecule, is investigated with ab-initio local density functional simulations.
Abstract: Equilibrium structure, local densities of states, and electronic transport in a gold nanowire made of a four-atom chain supported by two gold electrodes, which has been imaged recently by high-resolution electron microscopy, and chemical modification of the wire via the adsorption of a methylthiol molecule, are investigated with ab-initio local density functional simulations. In the bare wire at the imaged geometry the middle two atoms dimerize, and the structure is strongly modified by the adsorption of the molecule with an accompanying increase of the ballistic conductance through the wire.
90 citations
TL;DR: In this article, a resonant method based on a tunnel-diode oscillator for precision measurements of relative impedance changes in materials, is described, which consists of an effective self-resonant LC-tank circuit driven by a forward-biased tunnel diode operating in its negative resistance region.
Abstract: A resonant method based on a tunnel-diode oscillator (TDO) for precision measurements of relative impedance changes in materials, is described. The system consists of an effective self-resonant LC-tank circuit driven by a forward-biased tunnel diode operating in its negative resistance region. Samples under investigation are placed in the core of an inductive coil and impedance changes are determined directly from the measured shift in resonance frequency. A customized low temperature insert is used to integrate this experiment with a commercial Model 6000 Physical Property Measurement System (Quantum Design). Test measurements on a manganese-based perovskite sample exhibiting colossal magneto-resistance (CMR) indicate that this method is well suited to study the magneto-impedance in these materials.
80 citations
TL;DR: In this paper, the authors used a near-field scanning microwave microscope to quantitatively image the dielectric permittivity and tunability of thin-film dielectrics on a length scale of 1 micron.
Abstract: We describe the use of a near-field scanning microwave microscope to quantitatively image the dielectric permittivity and tunability of thin-film dielectric samples on a length scale of 1 micron. We demonstrate this technique with permittivity images and local hysteresis loops of a 370 nm thick barium strontium titanate thin film at 7.2 GHz. We also observe the role of annealing in the recovery of dielectric tunability in a damaged region of the thin film. We can measure changes in relative permittivity as small as 2 at 500, and changes in dielectric tunability as small as 0.03 V$^{-1}$.
79 citations
TL;DR: In this article, the authors reported the synthesis and characterization of Nd-0.5-Sr 0.5 -MnO-3 thin films grown by the Pulsed Laser Deposition (PLD) technique on 100-oriented LaAlO(3) substrates, and observed that transport properties are strongly dependent on the thickness of the films.
Abstract: We report the synthesis and characterization of Nd_{0.5}Sr_{0.5}MnO_{3} thin films grown by the Pulsed Laser Deposition technique on 100 -oriented LaAlO_{3} substrates. X-ray diffraction (XRD) studies show that the films are 101 -oriented, with a strained and quasi-relaxed component, the latter increasing with film thickness. We observe that transport properties are strongly dependent on the thickness of the films. Variable temperature XRD down to 100 K suggests that this is caused by substrate induced strain on the films.
TL;DR: In this paper, the structural and magnetic properties of Mn5Ge3Cx films were investigated at elevated substrate temperatures and they showed that the carbon is interstitially incorporated into the voids of Mn octahedra of the hexagonal Mn5Si3-type structure giving rise to a lattice compression.
Abstract: The structural and magnetic properties of Mn5Ge3Cx films prepared at elevated substrate temperatures TS are investigated. In particular, films with x >= 0.5 and TS = 680 K exhibit a strongly enhanced Curie temperature TC = 440 K compared to Mn5Ge3 with TC = 304 K. Structural analysis of these films suggests that the carbon is interstitially incorporated into the voids of Mn octahedra of the hexagonal Mn5Si3-type structure giving rise to a lattice compression. The enhanced ferromagnetic stability in connection with the lattice compression is interpreted in terms of an Mn-Mn interaction mediated by C based on a change in the electronic structure.
TL;DR: In this paper, double perovskite double-perovskites of A = Ba and Ca have been studied for electrical, thermal and magnetic properties and compared to the analogous compounds Sr_{2}Fe(Mo,Re)O(6).
Abstract: Ceramics of A_{2}FeReO_{6} double-perovskite have been prepared and studied for A=Ba and Ca. Ba_{2}FeReO_{6} has a cubic structure (Fm3m) with $a\approx $8.0854(1) \AA whereas Ca_{2}FeReO_{6} has a distorted monoclinic symmetry with $a\approx 5.396(1) \AA, b\approx 5.522(1) \AA, c\approx 7.688(2) \AA$ and $\beta =90.4^{\circ} (P21/n)$. The barium compound is metallic from 5 K to 385 K, i.e. no metal-insulator transition has been seen up to 385 K, and the calcium compound is semiconducting from 5 K to 385 K. Magnetization measurements show a ferrimagnetic behavior for both materials, with T_{c}=315 K for Ba_{2}FeReO_{6} and above 385 K for Ca_{2}FeReO_{6}. A specific heat measurement on the barium compound gave an electron density of states at the Fermi level, N(E_{F}) equal to 6.1$\times 10^{24} eV^{-1}mole^{-1}$. At 5 K, we observed a negative magnetoresistance of 10 % in a magnetic field of 5 T, but only for Ba_{2}FeReO_{6}. Electrical, thermal and magnetic properties are discussed and compared to the analogous compounds Sr_{2}Fe(Mo,Re)O_{6}.
Posted Content•
TL;DR: In this paper, the FP-LAPW method is compared with the one used by Wills et al. They show that the choice of a constant muffin-tin radius, common for all calculated volumes, is less satisfactory compared to a smaller radius, especially when a large volume interval and open packed structures are considered.
Abstract: In a recent paper by Jones et al., it is argued, based on FP-LAPW band-structure calculations, that previous calculations of ground-state properties for actinides, using the FP-LMTO method implemented by J. M. Wills, are in error. We demonstrate in this paper that the conclusions of Jones et. al. are unfounded. Calculations using the FP-LMTO method are compared with calculations performed with the FP-LAPW method and, in contradiction to statements by Jones et. al., they agree very well. The limitation of the present implementation of the spin-orbit coupling is discussed, where especially the 6p states pose a difficulty. The observed discrepancy (0-10%) between the FP-LMTO calculations and the recent FP-LAPW calculation of Jones et. al. is shown to be due to the choice of muffin-tin radius in the calculations. We argue that the choice of a constant muffin-tin radius, common for all calculated volumes, is less satisfactory compared to the choice of a muffin-tin radius that scales with the volume, especially when a large volume interval and open packed structures are considered. The conclusion of Jones et al. that alpha-Pu has partially delocalized 5f electrons is argued to be erroneous.
TL;DR: In this paper, an exact thermodynamic consideration of the mechanical and magnetic properties for a similar type of materials is presented. But the results of experimental study of large magnetostrain effects in Ni2MnGa are not discussed.
Abstract: A quantitative model describing large magnetostrain effect observed in several ferromagnetic shape memory alloys such as Ni2MnGa is briefly reported.The paper contains an exact thermodynamic consideration of the mechanical and magnetic properties for a similar type materials. As a result, the basic mechanical state equation including magnetic field effect is directly derived from a general Poisson's rule. It is shown that the magnetic field induced deformation effect is directly connected with the strain dependence of magnetization. A simple model of magnetization and its dependence on the strain is considered and applied to explain the results of experimental study of large magnetostrain effects in Ni2MnGa.
Posted Content•
TL;DR: In this paper, the theoretical and experimental status of surfactant mediated semiconductor epitaxial growth is reviewed, and the dominant mechanism is passivation of island edges, which leads to suppression of attachment and detachment of atoms to and from island edges.
Abstract: The theoretical and experimental status of surfactant mediated semiconductor epitaxial growth is reviewed. We discuss homoepitaxy as well as heteroepitaxy, and emphasize in particular issues related to the mechanism by which surfactants suppress growth of three dimensional islands in heteroepitaxy. We argue that the dominant mechanism is passivation of island edges, which leads to suppression of attachment and detachment of atoms to and from island edges.
TL;DR: In this article, the essential features of a full potential electronic structure method using Linear Muffin-Tin Orbitals (LMTOs) are presented, and the electron density and potential in the this method are represented with no inherent geometrical approximation.
Abstract: The essential features of a full potential electronic structure method using Linear Muffin-Tin Orbitals (LMTOs) are presented. The electron density and potential in the this method are represented with no inherent geometrical approximation. This method allows the calculation of total energies and forces with arbitrary accuracy while sacrificing much of the efficiency and physical content of approximate methods such as the LMTO-ASA method.
TL;DR: In this article, the concepts involved in the theory and applications of polarization in nitrides have encountered some resistance in the field and ten proposals aimed at clarifying the main controversial issues are discussed.
Abstract: Macroscopic polarization, both of intrinsic and piezoelectric nature, is unusually strong in III-V nitrides, and the built in electric fields in the layers of nitride-based nanostructures, stemming from polarization changes at heterointerfaces, have a major impact on the properties of single and multiple quantum wells, high mobility transistors, and thin films. The concepts involved in the theory and applications of polarization in nitrides have encountered some resistance in the field. Here we discuss critically ten ``propositions'' aimed at clarifying the main controversial issues.
TL;DR: In this paper, the authors present results of local spin density approximation pseudopotential calculations for the ferroelectromagnet, yttrium manganite (YMnO3).
Abstract: We present results of local spin density approximation pseudopotential calculations for the ferroelectromagnet, yttrium manganite (YMnO3). The origin of the differences between ferroelectric and non-ferroelectric perovskite manganites is determined by comparing the calculated properties of yttrium manganite in its ferroelectric hexagonal and non-ferroelectric orthorhombic phases. In addition, orthorhombic YMnO3 is compared with the prototypical non-ferroelectric manganite, lanthanum manganite. We show that, while the octahedral crystal field splitting of the cubic perovskite structure causes a centro-symmetric Jahn-Teller distortion around the Mn3+ ion, the markedly different splitting in hexagonal perovskites creates an electronic configuration consistent with ferroelectric distortion. We explain the nature of the distortion, and show that a local magnetic moment on the Mn3+ ion is a requirement for it to occur.
TL;DR: In this paper, a fragile model of static granular media is proposed, which predicts that the medium is unable to support certain types of infinitesimal load (which they call "incompatible") without plastic rearrangement.
Abstract: We have recently developed some simple continuum models of static granular media which display "fragile" behaviour: they predict that the medium is unable to support certain types of infinitesimal load (which we call "incompatible" loads) without plastic rearrangement. We argue that a fragile description may be appropriate when the mechanical integrity of the medium arises adaptively, in response to a load, through an internal jamming process. We hypothesize that a network of force chains (or "granular skeleton") evolves until it can just support the applied load, at which point it comes to rest; it then remains intact so long as no incompatible load is applied. Our fragile models exhibits unusual mechanical responses involving hyperbolic equations for stress propagation along fixed characteristics through the material. These characteristics represent force chains; their arrangement expressly depends on the construction history. Thus, for example, we predict a large difference in the stress pattern beneath two conical piles of sand, one poured from a point source and one created by sieving.
TL;DR: In this article, an extremely easy method for accurately calculating the adiabatic connection of density functional theory is presented, and its accuracy tested on both Hooke's atom and the He atom.
Abstract: An extremely easy method for accurately calculating the adiabatic connection of density functional theory is presented, and its accuracy tested on both Hooke's atom and the He atom. The method is easy because calculations are needed only for different values of parameters in the external potential, which can be achieved with almost any electronic structure code.
TL;DR: In this article, the mechanical resistance of a polyethylene strand subject to tension and the way its properties are affected by the presence of a knot are studied using first-principles molecular dynamics calculations.
Abstract: The mechanical resistance of a polyethylene strand subject to tension and the way its properties are affected by the presence of a knot is studied using first-principles molecular dynamics calculations. The distribution of strain energy for the knotted chains has a well-defined shape that is very different from the one found in the linear case. The presence of a knot significantly weakens the chain in which it is tied. Chain rupture invariably occurs just outside the entrance to the knot, as is the case for a macroscopic rope.
TL;DR: In this paper, the problem of replication of the static edge dislocation along third axis is analyzed under a special, though conventional, choice of the double curl Kroner's ansatz for stresses.
Abstract: T(3)-gauge model of defects based on the gauge Lagrangian quadratic in the gauge field strength is considered. The equilibrium equation of the medium is fulfilled by the double curl Kroner's ansatz for stresses. The problem of replication of the static edge dislocation along third axis is analysed under a special, though conventional, choice of this ansatz. The translational gauge equation is shown to constraint the functions parametrizing the ansatz (the stress functions) so that the resulting stress component $\sigma_{3 3}$ is not that of the edge defect. Another translational gauge equation with the double curl differential operator is shown to reproduce both the stress functions, as well as the stress tensors, of the standard edge and screw dislocations. Non-linear extension of the newly proposed translational gauge equation is given to correct the linear defect solutions in next orders. New gauge Lagrangian is suggested in the Hilbert-Einstein form.
Posted Content•
TL;DR: In this paper, a resonant scattering of the conduction electrons with the quasicrystalline structure is discussed, leading to a reduced electronic mobility and density of states (DOS) at the Fermi energy.
Abstract: Quasicrystals are assumed to be electronically stabilized by a Hume-Rothery type mechanism. This explains most of the peculiar properties of quasicrystals. The stabilization is investigated by electronic transport properties, as they depend sensitively on the stabilizing interaction between the static structure and the conduction electrons. Thin-film techniques provide samples which are well suited for systematic investigations as a function of composition and structural quality for Al-Cu-Fe and Al-Pd-Re i-phases. For a narrow range of composition, large transport anomalies occur, reaching a metal-insulator-transition in thin films of i-Al-Pd-Re. We discuss this in the framework of a resonant scattering of the conduction electrons with the quasicrystalline structure, leading to a reduced electronic mobility and density of states (DOS) at the Fermi energy $E_F$.
Posted Content•
TL;DR: In this paper, a phase diagram is presented for the PbZr(1-x)TixO3 ceramic system with Ti contents of x= 0.47 and 0.50.
Abstract: Recently a new monoclinic phase in the PbZr(1-x)TixO3 ceramic system has been reported by Noheda et al. for the composition x= 0.48. In the present work, samples with Ti contents of x= 0.47 and 0.50, which are both tetragonal below their Curie points, have been investigated. In the sample with x= 0.50, the tetragonal phase was found to transform to a monoclinic phase at about 200 K as the temperature was lowered. The sample with x= 0.47 showed a complicated region of phase coexistence between 440-320 K, becoming rhombohedral at around 300 K. No further symmetry change was found down to 20 K. Dielectric measurements for these two samples are also reported. On the basis of these results, a preliminary phase diagram is presented. Optimum compositional homogeneity is needed to properly characterize the new monoclinic region.
Posted Content•
TL;DR: For an uncorrelated many-electron system, polarization has been expressed and computed as a Berry phase of the Bloch orbitals (since 1993) and the case of a correlated and/or disordered system received a definitive solution only very recently (1998) as mentioned in this paper.
Abstract: The dipole moment of any finite and neutral system, having a square-integrable wavefunction, is a well defined quantity. The same quantity is ill-defined for an extended system, whose wavefunction invariably obeys periodic (Born-von Karman) boundary conditions. Despite this fact, macroscopic polarization is a theoretically accessible quantity, for either uncorrelated or correlated many-electron systems: in both cases, polarization is a rather "exotic" observable. For an uncorrelated-either Hartree-Fock or Kohn-Sham-crystalline solid, polarization has been expressed and computed as a Berry phase of the Bloch orbitals (since 1993). The case of a correlated and/or disordered system received a definitive solution only very recently (1998): this latest development allows us present here the whole theory from a novel, and very general, viewpoint. The modern theory of polarization is even relevant to the foundations of density functional theory in extended systems.
Posted Content•
TL;DR: In this paper, the authors discuss the problem of trapping and mobilization of nonwetting fluids during immiscible two phase displacement processes in porous media and show that replotting the data against a novel macroscopic capillary number resolves the problem for discontinuous mode displacement.
Abstract: We discuss the problem of trapping and mobilization of nonwetting fluids during immiscible two phase displacement processes in porous media. Capillary desaturation curves give residual saturations as a function of capillary number. Interpreting capillary numbers as the ratio of viscous to capillary forces the breakpoint in experimental curves contradicts the theoretically predicted force balance. We show that replotting the data against a novel macroscopic capillary number resolves the problem for discontinuous mode displacement.
TL;DR: In this article, first principles calculations were used to investigate the band structure and transport related properties of unfilled and filled 4d skutterudite antimonides, and it was shown that n-type La(Rh,Ru)4Sb12 is likely a high figure of merit thermoelectric material in the important temperature range 150-300 K.
Abstract: First principles calculations are used to investigate the band structure and the transport related properties of unfilled and filled 4d skutterudite antimonides. The calculations show that, while RhSb3 and p-type La(Rh,Ru)4Sb12 are unfavorable for thermoelectric application, n-type La(Rh,Ru)4Sb12 is very likely a high figure of merit thermoelectric material in the important temperature range 150-300 K.
TL;DR: A survey of the impact of band structure effects on various aspects of the interaction of charged particles with real solids is presented in this paper, where the role that interband transitions play in the decay mechanism of bulk plasmons is addressed, and results for plasmon linewidths in Al and Si are discussed.
Abstract: A survey is presented of current investigations of the impact of band structure effects on various aspects of the interaction of charged particles with real solids. The role that interband transitions play in the decay mechanism of bulk plasmons is addressed, and results for plasmon linewidths in Al and Si are discussed. {\it Ab initio} calculations of the electronic energy loss of ions moving in Al and Si are also presented, within linear response theory, from a realistic description of the one-electron band structure and a full treatment of the dynamic electronic response of valence electrons. Both random and position-dependent stopping powers of valence electrons are computed.
TL;DR: In this article, a lift-off process for fabrication of high quality superconducting submicron niobium structures was proposed, which makes use of a thermostable polymer with a high transition temperature T g = 235 C and an excellent chemical stability.
Abstract: We have developped a novel lift-off process for fabrication of high quality superconducting submicron niobium structures. The process makes use of a thermostable polymer with a high transition temperature T_{g}= 235 C and an excellent chemical stability. The superconducting critical temperature of 100 nm wide niobium lines is above 7 K. An example of shadow evaporation of a Nb-Cu submicron hybrid structure is given. A potential application of this process is the fabrication of very small single electron devices using refratory metals.