A review of modern advancements in micro drilling techniques
Reads0
Chats0
TLDR
A comparative study of conventional and non-conventional micro-drilling techniques is presented in this paper to show the potential and versatility of various micro drilling methods and their applications in modern age applications.About:
This article is published in Journal of Manufacturing Processes.The article was published on 2017-10-01 and is currently open access. It has received 131 citations till now. The article focuses on the topics: Drill.read more
Figures
![Fig. 32 SACE drilled micro holes on Pyrex glass a) cross sectional view, b) entrance, c) exit [10].](/figures/fig-32-sace-drilled-micro-holes-on-pyrex-glass-a-cross-3n2cggw7.png)
Fig. 32 SACE drilled micro holes on Pyrex glass a) cross sectional view, b) entrance, c) exit [10]. ![Fig. 18 Formation of chips at different stage of micro drilling, a) entrance, b) middle, c) exit [28]](/figures/fig-18-formation-of-chips-at-different-stage-of-micro-2flku2k3.png)
Fig. 18 Formation of chips at different stage of micro drilling, a) entrance, b) middle, c) exit [28] ![Fig. 14 Compound micro drill [27]](/figures/fig-14-compound-micro-drill-27-xsx3yff1.png)
Fig. 14 Compound micro drill [27] ![Fig. 13 3D design of single flute micro drill [37]](/figures/fig-13-3d-design-of-single-flute-micro-drill-37-1xbxztjf.png)
Fig. 13 3D design of single flute micro drill [37] ![Fig. 22 Strategy for prevention of micro drill breakage [20]](/figures/fig-22-strategy-for-prevention-of-micro-drill-breakage-20-3akvub8w.png)
Fig. 22 Strategy for prevention of micro drill breakage [20] 
Fig. 21 The illustration of Peck drilling
![Fig. 32 SACE drilled micro holes on Pyrex glass a) cross sectional view, b) entrance, c) exit [10].](/figures/fig-32-sace-drilled-micro-holes-on-pyrex-glass-a-cross-3n2cggw7.webp)
![Fig. 18 Formation of chips at different stage of micro drilling, a) entrance, b) middle, c) exit [28]](/figures/fig-18-formation-of-chips-at-different-stage-of-micro-2flku2k3.webp)
![Fig. 14 Compound micro drill [27]](/figures/fig-14-compound-micro-drill-27-xsx3yff1.webp)
![Fig. 13 3D design of single flute micro drill [37]](/figures/fig-13-3d-design-of-single-flute-micro-drill-37-1xbxztjf.webp)
![Fig. 22 Strategy for prevention of micro drill breakage [20]](/figures/fig-22-strategy-for-prevention-of-micro-drill-breakage-20-3akvub8w.webp)
Citations
More filters
Journal ArticleDOI
Carbon fiber reinforced polymer in drilling: From damage mechanisms to suppression
Teng Gao,Changhe Li,Yiqi Wang,Xueshu Liu,Qinglong An,Hao Nan Li,Yanbin Zhang,Huajun Cao,Bo Liu,Dazhong Wang,Zafar Said,Sujan Debnath,Muhammad Jamil,Hafiz Muhammad Ali,Shubham Sharma +14 more
TL;DR: In this paper , the authors present a systematic scheme of drilling damage suppression from the overall drilling system, including the formation mechanism of damage at different hole positions, including exit push-out delamination, entrance peel-up delamination and fiber pull-out, and the suppression strategies are systematically reviewed from the following four aspects: drilling techniques and methods, drilling conditions, tool design, and multi-techniques integration.
Journal ArticleDOI
Recent advances and challenges of abrasive jet machining
TL;DR: Abrasive jet machining (AJM) is a manufacturing technology based on erosion localization and intensification as discussed by the authors, which has a progressively important influence on the machining technology market.
Journal ArticleDOI
Micromanufacturing of composite materials: A review
TL;DR: In this article, the authors identify the major micromanufacturing methods used with composite materials, categorize their subclasses, and highlight the latest developments, new trends, and effects of key factors on the productivity, quality, and cost of manufacturing composite materials.
Journal ArticleDOI
Influence of longitudinal-torsional ultrasonic-assisted vibration on micro-hole drilling Ti-6Al-4V
TL;DR: In this article, Longitudinal-Torsional Ultrasonic Assisted Drilling (LTUAD) was employed to machine Ti-6Al-4V, and its feasibility was evaluated by comparing with conventional drilling (CD).
References
More filters
Book
Fundamentals of modern manufacturing : materials, processes, and systems
TL;DR: In this article, the authors discuss the nature of materials and their properties, including dimensions, Tolerances, and Surfaces, as well as the physical properties of materials, such as dimensions, tolerances and surfaces.
Journal ArticleDOI
Advancing Cutting Technology
TL;DR: A review of the main developments in cutting technology since the foundation of CIRP over fifty years ago is given in this paper, where the main technological developments associated with the cutting tool and tool materials, the workpiece material, the machine tool, the process conditions and the manufacturing environment are given detailed consideration.
Journal ArticleDOI
Synthesis, sintering, and mechanical properties of nanocrystalline cemented tungsten carbide - A review
TL;DR: In this paper, the average WC grain size was calculated for tungsten carbide powders, and it was shown that the mechanical behavior of the material may improve significantly when grain sizes reduce to nanometer scale.
Book
Printed Circuits Handbook
TL;DR: In this paper, the authors discuss the acceptability of printed circuit boards and assemblies, vendor selection and development of flexible circuit materials and fabrication, and testing assembly testing repair of bare board and board assemblies.