Journal ArticleDOI
Abrasive wear of white cast irons
Reads0
Chats0
TLDR
Abrasive wear tests on white cast irons were carried out using the wet rubber wheel test and the pin test on garnet and SiC commercial abrasive cloths as mentioned in this paper, and the influence of the matrix structure on abrasive wear was studied on one iron containing 28% massive carbides.About:
This article is published in Wear.The article was published on 1980-10-01. It has received 158 citations till now. The article focuses on the topics: Carbide & Abrasion (mechanical).read more
Citations
More filters
Journal ArticleDOI
Wear by hard particles
TL;DR: In this article, different types of interactions between the sliding particles and the wearing surface of the solid are distinguished between hard particles sliding on a softer solid surface and displaying or detaching material, and the theoretical models are supported by a lot of experimental results from studies on metallic or ceramic materials.
Journal ArticleDOI
Microstructure-property relationships in high chromium white iron alloys
TL;DR: In this paper, the development of the microstructure in high chromium white irons through solidification and thermal processing is discussed, and the metallurgical effects of conventional processing techniques are discussed.
Journal ArticleDOI
Solidification structure and abrasion resistance of high chromium white irons
TL;DR: In this paper, the macrostructural transitions of the castings, solidification paths, and resulting microstructures when poured with varying superheats were studied with respect to the macrostructure and microstructure.
Journal ArticleDOI
Effect of molybdenum and chromium contents in sliding wear of high-chromium white cast iron: The relationship between microstructure and wear
TL;DR: In this article, 15 high-chromium white cast alloys containing different chromium contents (16.5 to 32.5%Cr) and molybdenum (Mo free to 9.1%Mo) are examined.
Journal ArticleDOI
Microstructure and abrasive wear behaviour of shielded metal arc welding hardfacings used in the sugarcane industry
TL;DR: In this article, the abrasive wear behavior of hypereutectic and hypoeutective based Fe-Cr-C hardfacings is reported and interpreted in terms of the microstructures.
References
More filters
Journal ArticleDOI
Influence of abrasive hardness on the wear resistance of high chromium irons
R.B. Gundlach,J.L. Parks +1 more
TL;DR: In this article, the resistance to abrasive wear was determined for a series of alloyed white cast irons in a high stress abrasion test which utilizes a specimen in sliding contact with bonded abrasives.
Journal ArticleDOI
The measurement of wear resistance
TL;DR: In this article, a discussion of several important aspects of evaluating wear resistance is presented, focusing on abrasion, which is a large area of the complex field of wear, and the merit of these several qualities should be checked by statistical mathematics to avoid erroneous conclusions and misplaced confidence.
Journal ArticleDOI
A systems analysis data sheet for friction and wear tests and an outline for simulative testing
TL;DR: In this article, a data sheet for a systematic compilation of parameters relevant to tribo-testing and tribo engineering has been developed, which can be divided into four groups under the headings: technical function of the tribosystem, operating variables, structure of the system, and tribological characteristics.