Journal ArticleDOI
Alumina–zircon refractory materials for lining of the basin of glass furnaces: Effect of processing technique and TiO2 addition
TLDR
In this article, three batches composed of calcined alumina and Egyptian zircon sand were designed to produce refractory materials containing alumina-mullite-monoclinic Zirconia composites as lining materials for the basin of electric glass furnaces.About:
This article is published in Ceramics International.The article was published on 2015-01-01. It has received 15 citations till now. The article focuses on the topics: Soda-lime glass & Mullite.read more
Citations
More filters
Journal ArticleDOI
Improvement of physical and mechanical properties of geopolymer through addition of zircon
TL;DR: In this article, an attempt to incorporate zircon-ZrSiO4 with aluminum silicates in the matrix was addressed to improve physical and mechanical properties of geopolymer.
Journal ArticleDOI
Tribological performance at high temperatures of alumina coatings applied by plasma spraying process onto a refractory material
David Manuel Arzola Franco,David Manuel Arzola Franco,Hélène Ageorges,Esperanza López,Fabio Vargas +4 more
TL;DR: In this paper, two different Al2O3 coatings manufactured by plasma spraying process were tested under dry sliding contact conditions at high temperatures in order to determine their tribological behavior.
Journal ArticleDOI
Effect of processing techniques on properties of porous TiO2 and TiO2/hydroxyapatite composites
TL;DR: In this article, the effect of processing routes, namely; starch consolidation and freeze gelcasting techniques on the properties of porous TiO2 and TiO 2/5-wt% hydroxyapatite (HA) materials sintered at 1100 °C.
Journal ArticleDOI
Microwave combustion synthesis of MgO-Al2O3-SiO2-ZrO2 ceramics: Sinterability, microstructure and mechanical properties
TL;DR: In this paper, a microwave combustion technique was used to synthesize MgO-Al2O3-SiO2-ZrO2 ceramics by microwave combustion.
References
More filters
Book
Science and Technology of Zirconia
TL;DR: A review of current understanding of zirconia-based ceramics can be found in this paper, where 76 papers comprise six sections including phase transformations and phase stability, mechanical aspects of transformation toughening, microstructural aspects of transformations, structural and other applications, electrolytic properties and applications, and processing.
Journal ArticleDOI
Gelcasting of Alumina
TL;DR: Gelcasting is a novel method for molding ceramic powder based on a synthesis of concepts derived from traditional ceramics and polymer chemistry as discussed by the authors, which is described in this paper.
Journal Article
Gelcasting : a new ceramic forming process
TL;DR: In this article, a suspension de poudre ceramique dans une solution de monomeres organiques est coulee dans un moule, and on polymerise in situ le melange de monemeres pour former des pieces gelifiees which seront ensuite sechees and frittees.
Journal ArticleDOI
Gelcasting, a near net shape technique
TL;DR: In this paper, the authors describe their experience of the gelcasting of Al2O3 powders, and special attention was given to the preparation of slurries with a high Al 2O3 load, to gelation itself, catalytic or thermal, to the choice of mould materials, to drying step and to green machining.
Journal ArticleDOI
High temperature mechanical properties of reaction-sintered mullite/zirconia and mullite/alumina/zirconia composites
TL;DR: In this article, the fracture strength and fracture toughness of reaction-sintered mullite/zirconia composites were investigated as a function of temperature, and it was found that dispersion of zirconium particles and the particular microstructure of mullite obtained by means of anin situ reaction process leads to improved properties.