Journal ArticleDOI
Electrodeposition and properties of Zn–Ni–CNT composite coatings
TLDR
In this paper, the effect of CNTs on the corrosion behavior, wear resistance and hardness of composite coatings was investigated, and their corrosion properties were evaluated by polarization, impedance, weight loss and salt spray tests.About:
This article is published in Journal of Alloys and Compounds.The article was published on 2009-08-12. It has received 98 citations till now. The article focuses on the topics: Coating & Microstructure.read more
Citations
More filters
Journal ArticleDOI
Preparation and corrosion behavior of Ni and Ni–graphene composite coatings
TL;DR: In this paper, a composite coating of Ni-graphene on mild steel specimens was obtained by the electrodeposition technique, and it was subjected to various electrochemical tests to know its corrosion behavior and compared with pure Ni coating.
Journal ArticleDOI
Effect of particle size and co-deposition technique on hardness and corrosion properties of Ni–Co/SiC composite coatings
Babak Bakhit,Alireza Akbari +1 more
TL;DR: In this paper, a modified Watt's bath containing micro and nano-sized SiC particles was used to electrodeposite NiCo/SiC alloy matrix composite coatings.
Journal ArticleDOI
Preparation and corrosion resistance of pulse electrodeposited Zn and Zn–SiC nanocomposite coatings
TL;DR: In this paper, a pure Zn and Zn matrix composite coatings containing nano-sized SiC particles with an average size of 50nm were prepared from the zinc sulfate bath.
Journal ArticleDOI
Preparation and tribological behavior of Ni-graphene composite coating under room temperature
TL;DR: In this paper, Ni-graphene composite coatings with different graphene addition amounts were prepared on 45 steel disk by using dipulse composite electrodeposition technology, and the influence of plating time, bath temperature and load on friction and wear of the coating was studied.
Journal ArticleDOI
Electrochemical studies on Zn/nano-CeO2 electrodeposited composite coatings
TL;DR: In this paper, the performance of Zn-CeO 2 composite coatings through electrodeposition technique was successfully fabricated on mild steel substrate and the concentration of CeO 2 nanoparticles was varied in the electrolytic bath and the composites were electrodeposited both in the presence and absence of cetyltriammonium bromide (CTAB).
References
More filters
Book
Elements of X-ray diffraction
TL;DR: In this article, the authors present a chemical analysis of X-ray diffraction by Xray Spectrometry and phase-diagram Determination of single crystal structures and phase diagrams.
Book
Carbon: Electrochemical and Physicochemical Properties
TL;DR: In this paper, the authors present characterstics and properties of Carbon Electrodes, including physical properties, chemical and surface properties, as well as properties of carbon in the context of electrochemical systems.
Journal ArticleDOI
Electrodeposition of composite coatings containing nanoparticles in a metal deposit
TL;DR: In this article, the incorporation rates of the dispersed particles have been achieved using high nanoparticle concentration in the electrolyte solution, smaller sized nanoparticles; a low concentration of electroactive species, ultrasonication during deposition and pulsed current techniques.
Journal ArticleDOI
Corrosion behavior of carbon nanotubes–Ni composite coating
TL;DR: In this paper, the effect of incorporation of CNTs into the nickel coating on the morphology of the coating surface and corrosion properties was investigated Scanning electron microscopy (SEM) showed that the CNT appear well dispersed in the nickel layer Corrosion tests were performed in aqueous NaCl (35 wt%) using a weight loss method and electrochemical measurements for bare, pure nickel coated and CNT-nickel coated samples.
Related Papers (5)
Electrodeposition of Zn–Ni–Al2O3 nanocomposite coatings under ultrasound conditions
Huan-Yu Zheng,Maozhong An +1 more