Journal ArticleDOI
Electroless Deposition of Nickel‐Boron Alloys Mechanism of Process, Structure, and Some Properties of Deposits
Reads0
Chats0
TLDR
In this paper, the conditions for electroless nickel-boron plating, the process mechanism, and the structure of the alloys asplated and after annealing at 150°-700°C were investigated.Abstract:
The conditions for electroless nickel‐boron plating, the process mechanism, and the structure of the alloys as‐plated and after annealing at 150°–700°C were investigated. A correlation of the mechanical and magnetic properties with the changes of phase structure was established.read more
Citations
More filters
Journal ArticleDOI
Electrochemical and SEM investigations of the influence of gluconate on the electroless deposition of Ni-Cu-P alloys
TL;DR: In this paper, the effect of gluconate on the deposition rate and the deposit composition was examined at low pH of solution, and the activation energy of the alloy deposition was determined.
Journal ArticleDOI
Chemical Nickel Plating
TL;DR: In metal deposition, metal layers can be deposited from aqueous solutions not only by electric current as in electroplating but also by strong reducing agents as mentioned in this paper, and this remarkable reaction has recently found a variety of industrial applications mainly in the preparation of corrosion resistant, hard, and wear-resistant protective layers, in the metallizing of plastics, and in electronics.
Journal ArticleDOI
The effect of heat treatment on Ni–B–Ce electroless coatings
TL;DR: In this paper, a sonicated Ni-B-Ce coating on the surface of low carbon steel (Q235) was obtained through ultrasonic-assisted electroless plating with the deposition time of 60 minutes.
Journal ArticleDOI
Tribological evaluation of electroless Ni–B coating on metal-working tool steel
Jaime Taha-Tijerina,Karla Aviña-Camarena,Roal Torres-Sánchez,C. Domínguez-Rios,Demófilo Maldonado-Cortés +4 more
TL;DR: In this paper, an electroless method was employed for Ni-B coating deposition on D2 tool steel specimens, and tribological evaluations were performed on a block-on-ring configuration according to ITEePib Polish method for testing lubricants under conditions of scuffing.
Journal ArticleDOI
Effect of Additives and Heat Treatment on the Formation and Performance of Electroless Nickel-Boron Plating on AZ91D Mg Alloy
TL;DR: In this article, the effect of thiourea (TU) and saccharin (SAC) on the deposition rate, surface morphology, boron content, micro-hardness, and corrosion resistance of an electroless Ni-B plating layer on AZ91D magnesium alloy was investigated.
Related Papers (5)
Heat treatments for electroless nickel–boron plating on aluminium alloys
Fabienne Delaunois,P Lienard +1 more