Heated blends of clay and phosphate sludge: Microstructure and physical properties
Reads0
Chats0
TLDR
In this article, the effects of the change of temperature, soaking time and clay addition on some physical ceramic properties (shrinkage, water absorption and compressive strength) were assessed.About:
This article is published in Journal of Asian Ceramic Societies.The article was published on 2016-03-01 and is currently open access. It has received 18 citations till now. The article focuses on the topics: Melt flow index & Microstructure.read more
Citations
More filters
Journal ArticleDOI
Cordierite containing ceramic membranes from smectetic clay using natural organic wastes as pore-forming agents
TL;DR: In this paper, cordierite ceramic membranes were manufactured from natural clay, oxides and organic wastes as pore forming agents, and the results showed that these membranes could be used in waste water treatment.
Journal ArticleDOI
Improved recovery of cadmium from aqueous medium by alginate composite beads filled by bentonite and phosphate washing sludge
TL;DR: Alginate-based composite beads filled with bentonite (BE) and phosphate washing sludge (PS) have been prepared and used as low-cost adsorbents for removal of cadmium (Cd) from aqueous solution.
Journal ArticleDOI
Modified Zinc Phosphate Coatings: A Promising Approach to Enhance the Anti-corrosion Properties of Reinforcing Steel
TL;DR: In this paper, the authors review some important aspects related to the improvement of corrosion resistance of reinforcement using zinc phosphate coatings modified by metal cations or nanoparticles, which is a newly adapted method in the field of reinforcement corrosion protection.
Journal ArticleDOI
Phosphate Mine Tailing Recycling in Membrane Filter Manufacturing: Microstructure and Filtration Suitability
M. Loutou,Wafa Misrar,Mohammed Koudad,Mohammed Mansori,Liga Grase,C. Favotto,Yassine Taha,Rachid Hakkou +7 more
TL;DR: In this paper, the depollution of textile industry rejections with this method has not been studied in detail previously, and the results of the experimental design showed that the variations of physical properties versus processing factors were well described by the polynomial model.
Journal ArticleDOI
Prototype of phosphate sludge rotary dryer coupled to a parabolic trough collector solar loop: Integration and experimental analysis
TL;DR: In this paper, an experimental analysis of a phosphate sludge drying prototype that uses a Parabolic Trough Collector (PTC) solar technology as an energy source is presented, and the interconnection of the system's three components, namely the PTC loop, oil-air heat exchanger (HX), and rotary dryer, is described Experiments were carried out for each sub-system separately considering three air and Heat Transfer Fluid (HTF) flowrates, a drying temperature up to 135°C, and a phosphorous sludge flowrate of 5
References
More filters
Book
Sintering of Ceramics
TL;DR: Sintering of Ceramics: Fundamentals The Sintering process driving force for sintering Defects in Crystalline Solids Diffusion in Ionic Crystals: Ambipolar Diffusion Solid-State and Viscous Sinterings Mechanisms of SinterING Effects of Grain Boundaries Theoretical Analysis of SIntering Herring's Scaling Law Analytical Models Numerical Simulation of SINTERing Phenomenological Sinter-ing Equations Sintered Diagrams Sinterouring Diagram as discussed by the authors.
Journal ArticleDOI
Applied clay mineralogy today and tomorrow
TL;DR: The clay minerals kaolin, smectite and palygorskite-sepiolite are among the world's most important and useful industrial minerals as discussed by the authors and they are important in a number of geological applications such as stratigraphic correlations, indicators of environments of deposition and temperature for generation of hydrocarbons.
Book ChapterDOI
Sintering of Ceramics
TL;DR: The focus of sintering science is changing from the modification of microstructures in incremental ways for correspondingly incremental improvement in properties to more effectual manipulation of microstructure to optimize properties as mentioned in this paper.
Journal ArticleDOI
Mineralogy and firing characteristics of a clay from the valley of Ourika (Morocco)
TL;DR: In this paper, a Triassic clay deposit was qualitatively and quantitatively investigated by means of X-ray diffraction (XRD), thermal analysis (DTA-TG), infrared spectroscopy, gravimetry and analytical methods.