Journal ArticleDOI
High temperature oxidation of fuel cladding candidate materials in steam–hydrogen environments
Reads0
Chats0
TLDR
In this paper, a comparison of a range of commercial and model alloys, conventional austenitic steels do not have sufficient oxidation resistance with only ∼18Cr-10Ni, and higher alloyed type 310 stainless steel is protective but Ni is not a desirable alloy addition for this application.About:
This article is published in Journal of Nuclear Materials.The article was published on 2013-09-01. It has received 356 citations till now. The article focuses on the topics: Alloy & Corrosion.read more
Citations
More filters
Journal ArticleDOI
The oxidation behaviors of Cr2N and Cr/Cr2N multilayer coatings on Zircaloy-4 tubes in high temperature environment
Journal ArticleDOI
Precipitation behavior in Fe-13Cr-6Al-xMo-0.5Nb (x=2, 4) alloys for cladding materials during long-term aging at 475 °C
Journal ArticleDOI
Analysis of inconel 600 oxidized under loss-of-coolant accident conditions: A multi-modal approach
TL;DR: In this paper , a multi-modal approach combining synchrotron-based diffraction, and Raman spectroscopy with nano-scale electron microscopy techniques for investigating oxidation of Inconel 600 (A600) in steam and air environments at 1200 °C for 2 h.
Development of novel high-throughput methodologies to evaluate the thermal stability of high-temperature thin-film crystals for energy applications
TL;DR: In this paper, a high-throughput experimentation (HTE) framework is proposed to investigate crystal phase dynamics of high-temperature thin-film materials and its use in the case-study investigations.
Journal ArticleDOI
Evaluation of solid-core thermal antimatter propulsion concepts
TL;DR: In this paper , the authors evaluate and compare different propulsion concepts and assess the resulting performance for different propellants (hydrogen, water, methane, and carbon dioxide) and electric propulsion technologies (arcjets, Hall thrusters, and gridded ion thrusters).
References
More filters
Journal ArticleDOI
Experimental observations in support of the dynamic-segregation theory to explain the reactive-element effect
TL;DR: In this article, a model was developed to explain the effects associated with the addition of reactive elements that is based on the segregation of reactive-element ions to scale grain boundaries and the metal-oxide interface.
Journal ArticleDOI
Structural materials challenges for advanced reactor systems
TL;DR: In this paper, the authors give a brief overview of various materials that are essential to establish advanced systems feasibility and performance for in pile and out of pile applications, such as ferritic/martensitic steels (9-12% Cr), nickel based alloys (Haynes 230, Inconel 617, etc.), oxide dispersion strengthened ferritic and martensite steels, and ceramics (SiC, TiC, etc.).
Journal ArticleDOI
Oxide dispersion-strengthened steels: A comparison of some commercial and experimental alloys
TL;DR: In this article, the differences and similarities of different ODS steels are explained in terms of the microstructures of the steels, and observations are explained using the properties of the ODS micro-structures.
Journal ArticleDOI
Paralinear Oxidation of CVD SiC in Water Vapor
TL;DR: In this article, the long-term degradation rate of CVD SiC is determined by the volatility of the silica scale, which is observed as the water vapor oxidized the SiC and simultaneously volatilized the scale.
Journal ArticleDOI
The Effect of Oxide Volatilization on the Oxidation Kinetics of Cr and Fe‐Cr Alloys
TL;DR: In this paper, the authors derived equations which describe the oxidation behavior of a system in which both diffusive and gas/oxide interface processes occur simultaneously, and applied these equations to the oxidation of Cr and Fe-Cr alloys.