Journal ArticleDOI
Hydroxy acid-aided synthesis of perovskite-type oxides of cobalt and manganese
Reads0
Chats0
TLDR
In this article, the acid-aided process using citric or malic acid produced a perovskite phase at relatively low calcination temperatures, and the adjustment of the starting solution to an appropriate pH value in the malic-acid-based process resulted in reducing the temperature for the formation of single-phase perovsite-type oxides and in producing large surface-area oxides.Abstract:
The hydroxy acid-aided process using citric or malic acid produced a perovskite phase at relatively low calcination temperatures. The adjustment of the starting solution to an appropriate pH value in the malic acid-aided process resulted in reducing the temperature for the formation of single-phase perovskite-type oxides and in producing large surface-area oxides.read more
Citations
More filters
Journal ArticleDOI
Bifunctional oxygen/air electrodes
TL;DR: A selective review on the materials and construction principles used for bifunctional oxygen/air electrodes is given in this paper, which emphasizes the catalytically active materials used for the construction of these electrodes, which are a key component in electrically rechargeable air breathing electrochemical systems.
Journal ArticleDOI
Synthesis and characterization of ilmenite NiTiO3 and CoTiO3 prepared by a modified Pechini method
TL;DR: In this article, NiTiO 3 and CoTiO3 were prepared by a simple method based on the modified Pechini process and the raw compounds and citric acid (CA) were mixed in ethanol (EA) with the molar ratio Ni(Co)/Ti/CA/EA/EA = 1/1/ 1/7.5.
Journal ArticleDOI
NiTiO3 powders obtained by polymeric precursor method: Synthesis and characterization
Kirian Pimenta Lopes,Laécio S. Cavalcante,Alexandre Zirpoli Simões,José Arana Varela,Elson Longo,Edson R. Leite +5 more
TL;DR: The structural evolution of NiTiO3 phase was accompanied by X-ray diffraction and Fourier transform Raman spectroscopy by scanning electron microscopy was revealed the agglomerated nature of very fine particles.
Journal ArticleDOI
High-Performance Oxygen-Permeable Membranes with an Asymmetric Structure Using Ba0.95La0.05FeO3−δ Perovskite-Type Oxide
TL;DR: This paper aims to demonstrate the efforts towards in-situ applicability of EMMARM, which aims to provide real-time information about concrete mechanical properties such as E-modulus and compressive strength.
Journal ArticleDOI
Polyacrylamide gel: an efficient tool for easy synthesis of multicomponent oxide precursors of ceramics and glasses
TL;DR: In this article, the steric entrapment effect of polyacrylamide gel is used for aqueous chemical processes, and the same concept may be used for other organic gels in organic media.
References
More filters
Journal ArticleDOI
Preparation of Highly Dispersed Mixed Oxides and Oxide Solid Solutions by Pyrolysis of Amorphous Organic Precursors
Journal ArticleDOI
Production of strontium-substituted lanthanum manganite perovskite powder by the amorphous citrate process
M. S. G. Baythoun,F. R. Sale +1 more
TL;DR: In this paper, the surface area and residual carbon content of the strontium-substituted LaMnO3 have been determined as a function of the decomposition/oxidation temperature.
Journal ArticleDOI
Oxydes mixtes ou en solution solide sous forme très divisée obtenus par décomposition thermique de précurseurs amorphes
TL;DR: In this article, the results of a comparison of precurseurs amorphes with pyrolyse a Pair sous forme tres divisee, are presented, with respect to phase, taille des particules, surface specifique.
Journal ArticleDOI
Production of Conducting Oxide Powders by Amorphous Citrate Process
D. J. Anderton,F. R. Sale +1 more
TL;DR: The amorphous citrate process has been used to produce Co3O4, CoO, Cr2O3, LaCoO3 and LaCrO3 as discussed by the authors.