Open Access
Impingement heat transfer from turbulent air jets to flat plates: A literature survey
J. N. B. Livingood,P. Hrycak +1 more
Reads0
Chats0
TLDR
In this article, the heat transfer characteristics of single and multiple turbulent air jets impinging on flat surfaces have been studied by many investigators, and suggested correlations for use in the design of cooled turbine blades are noted.Abstract:
Heat transfer characteristics of single and multiple turbulent air jets impinging on flat surfaces have been studied by many investigators. Results of many of these studies are summarized. Suggested correlations for use in the design of cooled turbine blades are noted, and areas where further research would be advisable are identified.read more
Citations
More filters
Journal ArticleDOI
Air jet impingement heat transfer at low nozzle-plate spacings
D Lytle,Brent W. Webb +1 more
TL;DR: In this article, the authors examined the local heat transfer characteristics of air jet impingement at nozzle-plate spacings of less than one nozzle diameter using an infrared thermal imaging technique.
Book ChapterDOI
Single-Phase Liquid Jet Impingement Heat Transfer
Brent W. Webb,C. F. Ma +1 more
TL;DR: In this article, the authors summarized the available analytical and experimental work in the area with the objective of correlating the research findings and suggested that there is considerable need for further research in liquid jet array applications, both in submerged and free-surface jet configurations.
Journal ArticleDOI
Vortical structures and heat transfer in a round impinging jet
TL;DR: In this article, the authors performed large-eddy simulations of a round normally impinging jet issuing from a long pipe at Reynolds number Re = 20000 at the orifice-to-plate distance H = 2D, where D is the jet-nozzle diameter.
Journal ArticleDOI
Experimental study and theoretical analysis of local heat transfer distribution between smooth flat surface and impinging air jet from a circular straight pipe nozzle
Vadiraj Katti,S.V. Prabhu +1 more
TL;DR: In this article, the effect of jet-to-plate spacing and Reynolds number on the local heat transfer distribution to normally impinging submerged circular air jet on a smooth and flat surface was investigated.
Journal ArticleDOI
Effect of jet-jet spacing on convective heat transfer to confined, impinging arrays of axisymmetric air jets
Aaron M. Huber,Raymond Viskanta +1 more
TL;DR: In this paper, the effects of jet-jet spacing, low nozzle-plate spacings, and spent air exits located between the jet orifices were studied on the magnitude and uniformity of the convective heat transfer coefficients for confined 3 × 3 square arrays of isothermal axisymmetric air jets impinging normally to a heated surface.
References
More filters
Journal ArticleDOI
Heat Transfer by a Square Array of Round Air Jets Impinging Perpendicular to a Flat Surface Including the Effect of Spent Air
D. M. Kercher,Widen Tabakoff +1 more
Journal ArticleDOI
Heat Transfer by Convection from a Hot Gas Jet to a Plane Surface
TL;DR: In this article, measurements have been made of the heat transfer from air jets, with temperature differences of up to 400 deg. C. (750 deg. F) and velocities up to 250 ft. per sec., impinging on a plane surfac...
Journal ArticleDOI
Effects of Crossflow on Impingement Heat Transfer
D. E. Metzger,R. J. Korstad +1 more
Journal ArticleDOI
Investigations of Heat-Transfer Coefficients for Air Flow Through Round Jets Impinging Normal to a Heat-Transfer Surface
Journal ArticleDOI
Heat transfer between an axisymmetric jet and a plate normal to the flow
P. M. Brdlik,V. K. Savin +1 more
TL;DR: In this article, an analytical and experimental investigation of heat transfer between an axisymmetric jet and a plate normal to the flow for laminar boundary layer conditions is presented.