Journal ArticleDOI
Influence of low-plasticity ball burnishing on the high-cycle fatigue strength of medium carbon AISI 1045 steel
TLDR
In this article, the improvement in the high-cycle fatigue strength of AISI 1045 normalized steel after low-plasticity ball burnishing was quantified, providing engineering data and coefficients useful for fatigue analysis and design.About:
This article is published in International Journal of Fatigue.The article was published on 2013-10-01. It has received 134 citations till now. The article focuses on the topics: Fatigue limit & Burnishing (metal).read more
Citations
More filters
Journal ArticleDOI
Laser shock peening effect on the dislocation transitions and grain refinement of Al–Mg–Si alloy
TL;DR: In this paper, the effect of laser shock peening without coating parameters on the microstructural evolution, and dislocation configurations induced by ultra-high plastic strains and strain rates was investigated.
Journal ArticleDOI
Surface modification by machine hammer peening and burnishing
TL;DR: All surface modification processes using guided tools with periodic or continuous contact to the workpiece are compared and a systematic description by comparing the different technologies and the proposed standardized nomenclature is presented.
Journal ArticleDOI
Effects of Ultrasonics-Assisted Face Milling on Surface Integrity and Fatigue Life of Ni-Alloy 718
Alfredo Suárez,Fernando Veiga,L.N. López de Lacalle,R. Polvorosa,Steffen Lutze,Anders Wretland +5 more
TL;DR: In this article, the effects of ultrasonic vibration-assisted milling on important aspects such as material surface integrity, tool wear, cutting forces and fatigue resistance were investigated for Alloy 718.
Journal ArticleDOI
Influence of ball burnishing on residual stress profile of a 15-5PH stainless steel
TL;DR: In this paper, the influence of ball-burnishing on residual stress profile of a 15-5PH martensitic stainless steel was investigated to understand their influence on the residual stress profiles in axial and circumferential directions.
Journal ArticleDOI
A Combined High and Low Cycle Fatigue Model for Life Prediction of Turbine Blades.
TL;DR: A new damage accumulation model is proposed based on Miner’s rule to consider the coupled damage due to HCF-LCF interaction by introducing the four load parameters, and shows that the proposed model provides more accurate predictions than others with lower mean and standard deviation values of model prediction errors.
References
More filters
Book
Mechanical engineering design
TL;DR: In this paper, the authors discuss failure prevention of failure due to static loading and fatigue failure resulting from variable loading in the design of non-permanent joint components, such as screw heads, fasteners, and nonpermanent joints.
Journal ArticleDOI
Laser shock processing and its effects on microstructure and properties of metal alloys: a review
TL;DR: In this paper, the current status of research and development on laser shock processing of metals, also known as laser peening, using Q-switched high power lasers is reviewed and the influence of processing parameters on the laser-induced shock waves in metal components are discussed and analyzed.
Journal ArticleDOI
Fundamentals of Machine Component Design
Book
Machine Design: An Integrated Approach
TL;DR: In this paper, the authors present a list of software included on CD-ROMs, including TKSOLVER, MathCAD, and Answer to Selected Problems (ABP).
Journal ArticleDOI
An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel
TL;DR: In this article, the authors evaluated the fatigue life of AISI 4340 steel, used in landing gear, under four shot peening conditions and found that relaxation of the residual stress field occurred due to the fatigue process.
Related Papers (5)
The Influence of Surface Enhancement by Low Plasticity Burnishing on the Corrosion Fatigue Performance of AA7075-T6
Paul S. Prevey,John T. Cammett +1 more