Influence of vanadium filler on the properties of titanium and steel TIG welded joints
TLDR
In this article, Tungsten inert gas (TIG) welding method was employed to fuse Ti, Fe and Fe-Fe butt-welded joints through vanadium filler metal.About:
This article is published in Journal of Materials Processing Technology.The article was published on 2017-02-01 and is currently open access. It has received 52 citations till now. The article focuses on the topics: Filler metal & Gas tungsten arc welding.read more
Citations
More filters
Journal ArticleDOI
A review on dissimilar metals’ welding methods and mechanisms with interlayer
TL;DR: In this article, the authors reviewed the recent progress of dissimilar metals' welding methods and mechanisms with interlayer to offer a basis for the following research and discussed several criteria for the selection of interlayer, such as physical properties, metallurgical compatibility, mode, and thickness of the interlayer.
Journal ArticleDOI
A Review on Diffusion Bonding between Titanium Alloys and Stainless Steels
Defeng Mo,Tingfeng Song,Yongjian Fang,Xiaosong Jiang,Charles Q. Luo,Machael D. Simpson,Zhiping Luo +6 more
TL;DR: In this article, a diffusion bonding between titanium alloys and stainless steels with or without interlayers is presented, where the authors select the multi-interlayer based on two principles: no formation of brittle intermetallic phases and transitional physical properties between titanium alloy and stainless steel.
Journal ArticleDOI
Inhomogeneous interface structure and mechanical properties of rotary friction welded TC4 titanium alloy/316L stainless steel joints
TL;DR: In this paper, the authors investigated the inhomogeneous interface structure and mechanical properties along the radius direction of rotary friction welded TC4 titanium alloy/316 l stainless steel dissimilar joints under as-welded and postweld heat treated conditions.
Journal ArticleDOI
Effect of interlayer material and rolling temperature on microstructures and mechanical properties of titanium/steel clad plates
TL;DR: Titanium (Ti)/steel clad plates with interlayer material of interstitial free (IF) steel, vanadium (V) and IF steel + V were successfully fabricated by hot roll bonding method at temperature of 850, 900 and 950 °C as mentioned in this paper.
Journal ArticleDOI
Nd:YAG pulsed laser welding of TC4 Ti alloy to 301L stainless steel using Ta/V/Fe composite interlayer
TL;DR: In this article, the feasibility of Nd:YAG laser welding of Ti alloy to stainless steel through composite layer Ta/V/Fe was reported, where the laser beam was focused on the centerline of Ta and Fe sheets respectively to ensure that V interlayer was not completely melted.
References
More filters
Journal ArticleDOI
Solid state diffusion bonding of titanium to steel using a copper base alloy as interlayer
A. Elrefaey,Wolfgang Tillmann +1 more
TL;DR: In this paper, a copper-based interlayer was added to the diffusion bonding process to prevent atom diffusion and migration between Fe and Fe or C. This technique provided a reliable method of bonding titanium to steel.
Journal ArticleDOI
Thermal behavior during selective laser melting of commercially pure titanium powder: Numerical simulation and experimental study
Yali Li,Dongdong Gu +1 more
TL;DR: In this article, a three-dimensional model was developed for studying thermal behavior during selective laser melting (SLM) of commercially pure titanium (CP Ti) powder, and the effects of scan speed and laser power on SLM thermal behavior were investigated.
Journal ArticleDOI
Numerical and experimental investigations on the residual stresses of the butt-welded joints
Peng-Hsiang Chang,Tso-Liang Teng +1 more
TL;DR: In this article, the authors applied thermal elasto-plastic analysis, using finite element techniques, to analyze the thermomechanical behavior and evaluate the residual stresses in butt-welded joints.
Journal ArticleDOI
Dissimilar laser welding of AISI 316L stainless steel to Ti6–Al4–6V alloy via pure vanadium interlayer
TL;DR: In this paper, continuous laser joining of AISI 316L stainless steel with Ti6Al4V titanium alloy through pure vanadium interlayer has been performed, and three welding configurations were tested: one-pass welding involving all three materials and two pass and double spot welding involving creation of two melted zones separated by remaining solid vanadium.
Journal ArticleDOI
Microstructure and mechanical properties of CP-Ti/X65 bimetallic sheets fabricated by explosive welding and hot rolling
TL;DR: The microstructure and alloy element distribution across the TA1/X65 interfaces of as-welded, heat treated and extruded TA 1/X 65 bimetallic sheets were studied and compared as discussed by the authors.