Laser techniques for dissimilar joining of aluminum alloys to steels: A critical review
Jin Yang,Viviana Scognamiglio,Corinne Hubinont,João Pedro Oliveira,Yulong Li,Caiwang Tan,Chenkai Gao,Yixuan Zhao,Zhishui Yu +8 more
TLDR
In this paper, the authors provide a comprehensive and exhausting analysis of the recent achievements and progress on joining of Al alloys to steel by various laser-based joining processes, including laser keyhole welding, laser welding-brazing, laser-arc welding and laser roll pressure welding and joining based on laser additive manufacturing.About:
This article is published in Journal of Materials Processing Technology.The article was published on 2022-03-01 and is currently open access. It has received 87 citations till now. The article focuses on the topics: Welding & Fusion welding.read more
Citations
More filters
Journal ArticleDOI
Multi-material additive manufacturing: A systematic review of design, properties, applications, challenges, and 3D Printing of materials and cellular metamaterials
Aamer Nazir,Ozkan Gokcekaya,Kazi Md Masum Billah,O. Ertugrul,Jingchao Jiang,Jiayu Sun,Sajjad Hussain +6 more
TL;DR: In this paper , a comprehensive review of multi-material additive manufacturing (MMAM) technologies is presented, focusing on applications and opportunities for using MMAM for several industries and postprocessing MMAM fabricated parts.
Journal ArticleDOI
Enhancing the wettability for 4043 aluminum alloy on 301L stainless steel via chemical-etched surface texturing
TL;DR: In this article , the effect of chemical-etched surface texturing on Al/stainless steel wetting was investigated by the modified sessile drop method and the spreading mechanism was revealed by combining the identification of precursor films and interfacial microstructures with the analysis of spreading dynamics.
Journal ArticleDOI
Wire and arc additive manufacturing of dissimilar 2319 and 5B06 aluminum alloys
TL;DR: In this article , cracks propagate either along the aggregated pores or strip θ-Al 2 Cu phase distributed along the grain boundary, regardless of the deposition order of the dissimilar alloys.
Journal ArticleDOI
A short review on functionalized metallic surfaces by ultrafast laser micromachining
Journal ArticleDOI
Buttering for FSW: Enhancing the fracture toughness of Al-Fe intermetallics through nanocrystallinity and suppressing their growth
TL;DR: In this article , the authors developed a metallurgical approach to control the growth and microstructure of AlFe IMCs during friction stir welding (FSW) of dissimilar metals.
References
More filters
Book
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
TL;DR: Gibson et al. as discussed by the authors presented a comprehensive overview of additive manufacturing technologies plus descriptions of support technologies like software systems and post-processing approaches, and provided systematic solutions for process selection and design for AM Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing.
Book
Properties and selection : nonferrous alloys and special-purpose materials
TL;DR: The ASM Handbook as discussed by the authors provides a comprehensive and authoritative single-volume reference on nonferrous metals and alloys, with particular emphasis on aluminum, titanium, copper, and magnesium.
Journal ArticleDOI
A new finite element model for welding heat sources
TL;DR: In this article, a double ellipsoidal geometry is proposed to model both shallow penetration arc welding processes and the deeper penetration laser and electron beam processes, which can be easily changed to handle non-axisymmetric cases such as strip electrodes or dissimilar metal joining.
Journal ArticleDOI
Evaluation ofKIc of brittle solids by the indentation method with low crack-to-indent ratios
Journal ArticleDOI
Control of intermetallic compound layers at interface between steel and aluminum by diffusion-treatment
Shigeaki Kobayashi,Takao Yakou +1 more
TL;DR: In this article, the growth mechanism, morphology and mechanical properties of Fe-Al intermetallic compound layers on the surface of carbon steel were systematically evaluated for specimens diffused at temperatures ranging from 873 to 1323 K after hot dip aluminizing.