Patent
Matched high Q, high frequency resonators
TLDR
In this paper, the resonator is formed with a primary line which is slightly less than a ltiple of a half wavelength long, a tee, and a matching stub, and the primary line and the stub are adjustable to make the total length a multiple of one half wavelength.Abstract:
The resonator is formed with a primary line which is slightly less than a ltiple of a half wavelength long, a tee, and a matching stub. The primary line and the stub are adjustable to make the total length a multiple of one half wavelength. A mechanical link can be connected across the two adjustable lengths so as to maintain a total length of a multiple integral of one half wavelength.read more
Citations
More filters
Patent
Low frequency isolator for radio frequency hyperthermia probe
TL;DR: An isolator for insertion in a coaxial cable between an RF generator and a device employing RF energy provides isolation against DC and low frequency (60 Hz) AC while passing the RF energy with low attenuation and a low reflection ratio.
Patent
Single hybrid junction frequency discriminator
TL;DR: In this article, a single hybrid junction discriminator is described for operation over a wide operating frequency range, which uses a transmission line, phase shifters and fixed short circuits in providing a resonant cavity in the discriminator element to measure near carrier frequency modulated noise on a carrier frequency.
Patent
High power slide screw tuners
TL;DR: In this article, a flexible joint between the center conductor and the DUT is proposed to allow longitudinal center conductor expansion and contraction, thus preserving tuner accuracy and safety, which has shown significant improvement in thermal behavior.
Patent
Adjustable filter device
TL;DR: In this paper, an adjustable filter includes an outer conductor, a first inner conductor, and a second inner conductor capacitively coupled on the same axis, with the outer conductor axially displaceable with respect to the first and second inner conductors.
Patent
Adjustable coaxial filter device with axially adjustable inner conductor
TL;DR: In this article, an adjustable filter includes an outer conductor, a first inner conductor, and a second inner conductor capacitively coupled on the same axis, with the outer conductor axially displaceable with respect to the first and second inner conductors.
References
More filters
Related Papers (5)
Independently Controllable Dual-Band Bandpass Filters Using Asymmetric Stepped-Impedance Resonators
Chan Ho Kim,Kai Chang +1 more