scispace - formally typeset
Journal ArticleDOI

Nano-network electronic conduction in iron and nickel olivine phosphates.

Reads0
Chats0
TLDR
The demonstration of non-carbonaceous-network grain-boundary conduction to be the first in these materials, and that it holds promise for other insulating phosphates.
Abstract
The provision of efficient electron and ion transport is a critical issue in an exciting new group of materials based on lithium metal phosphates that are important as cathodes for lithium-ion batteries. Much interest centres on olivine-type LiFePO(4), the most prominent member of this family. Whereas the one-dimensional lithium-ion mobility in this framework is high, the electronically insulating phosphate groups that benefit the voltage also isolate the redox centres within the lattice. The pristine compound is a very poor conductor (sigma approximately 10(-9) S cm(-1)), thus limiting its electrochemical response. One approach to overcome this is to include conductive phases, increasing its capacity to near-theoretical values. There have also been attempts to alter the inherent conductivity of the lattice by doping it with a supervalent ion. Compositions were reported to be black p-type semiconductors with conductivities of approximately 10(-2) S cm(-1) arising from minority Fe(3+) hole carriers. Our results for doped (and undoped) LiMPO(4) (M = Fe, Ni) show that a percolating nano-network of metal-rich phosphides are responsible for the enhanced conductivity. We believe our demonstration of non-carbonaceous-network grain-boundary conduction to be the first in these materials, and that it holds promise for other insulating phosphates.

read more

Citations
More filters
Journal ArticleDOI

Lithium Batteries and Cathode Materials

TL;DR: This paper will describe lithium batteries in more detail, building an overall foundation for the papers that follow which describe specific components in some depth and usually with an emphasis on the materials behavior.
Journal ArticleDOI

Battery materials for ultrafast charging and discharging

TL;DR: It is shown that batteries which obtain high energy density by storing charge in the bulk of a material can also achieve ultrahigh discharge rates, comparable to those of supercapacitors.
Journal ArticleDOI

30 Years of Lithium-Ion Batteries.

TL;DR: The main roles of material science in the development of LIBs are discussed, with a statement of caution for the current modern battery research along with a brief discussion on beyond lithium-ion battery chemistries.
References
More filters
Journal ArticleDOI

Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries

TL;DR: In this article, the authors showed that a reversible loss in capacity with increasing current density appears to be associated with a diffusion-limited transfer of lithium across the two-phase interface.
Journal ArticleDOI

Electronically conductive phospho-olivines as lithium storage electrodes

TL;DR: It is shown that controlled cation non-stoichiometry combined with solid-solution doping by metals supervalent to Li+ increases the electronic conductivity of LiFePO4 by a factor of ∼108, which may allow development of lithium batteries with the highest power density yet.
Journal ArticleDOI

Approaching Theoretical Capacity of LiFePO4 at Room Temperature at High Rates

TL;DR: In this article, a composite of the phosphate with a carbon xerogel formed from a resorcinol-formaldehyde precursor is presented, which achieves 90% theoretical capacity at C/2, with very good rate capability and excellent stability.
Journal ArticleDOI

Li conductivity in lix mpo 4 ( m = mn , fe , co , ni ) olivine materials

TL;DR: In this article, activation barriers to Li ion motion are calculated and an estimate for Li diffusion constants, in the absence of electrical conductivity constraints, is made using first-principles methods.
Journal ArticleDOI

A Novel Concept for the Synthesis of an Improved LiFePO4 Lithium Battery Cathode

TL;DR: In this paper, the authors describe the synthesis and properties of a kinetically improved cathode material, which is based on a critical step involving the dispersion of metal at a very low concentration (1 wt %).
Related Papers (5)