Journal ArticleDOI
On the critical technological issues of CFF: enhancing the bearing strength
TLDR
In this paper, the authors deal with 3D printing composites fabricated by Continuous Fiber/Filament Fabrication with an innovative thermoplastic matrix infilled with micro carbon fiber, i.e., Onyx, and...Abstract:
This research activity deals with 3D printing composites fabricated by Continuous Fiber/Filament Fabrication with an innovative thermoplastic matrix infilled with microcarbon fiber, i.e., Onyx, and...read more
Citations
More filters
Journal ArticleDOI
Process parameters effect on environmental sustainability of composites FFF technology
TL;DR: In this paper , the effect of process parameters on environmental sustainability of 3D printing of short fiber-reinforced polymer composites was investigated, in terms of printing speed, extrusion temperature and layer thickness.
Journal ArticleDOI
Pin-bearing mechanical behaviour of continuous reinforced Kevlar fibre composite fabricated via fused filament fabrication
TL;DR: In this paper , the pin bearing behavior of a 3D printed composite material with Kevlar reinforcement was analyzed. And the results indicated a significant increase in bearing strength and stiffness for at least two fibre orientations, i.e. 0° and 90° with respect to the pin displacement.
Proceedings ArticleDOI
Performance Analysis for Human Crowd Monitoring to Control COVID-19 disease by Drone Surveillance
Claudia Conte,Giorgio de Alteriis,Francesco de Pandi,Enzo Caputo,Rosario Schiano Lo Moriello,Giancarlo Rufino,Domenico Accardo +6 more
TL;DR: In this paper, a configuration of drone swarm that can be used in support of the actions to limit the virus spread during a pandemic period, such as the COVID-19 emergency, is described.
Journal ArticleDOI
Innovative Fusion Strategy for MEMS Redundant-IMU Exploiting Custom 3D Components
Giorgio de Alteriis,Alessia Teresa Silvestri,Claudia Conte,V. Bottino,Enzo Caputo,Antonino Squillace,Domenico Accardo,Rosario Schiano Lo Moriello +7 more
TL;DR: In this paper , a redundant-IMU solution for low-cost consumer-grade MEMS sensors suitable also for navigation applications has been proposed, based on the evaluation of the Allan variance and the use of weighted average.
Proceedings ArticleDOI
Accurate Attitude Inizialization Procedure based on MEMS IMU and Magnetometer Integration
Giorgio de Alteriis,Verdiana Bottino,Claudia Conte,Giancarlo Rufino,Rosario Schiano Lo Moriello +4 more
TL;DR: In this article, the authors presented an innovative strategy to measure the initial heading of a vehicle in the local reference frame by means of a tactical-grade MEMS-based inertial measurement unit and a low-cost MEMS magnetometer.
References
More filters
BookDOI
Additive manufacturing technologies : 3D printing, rapid prototyping, and direct digital manufacturing
TL;DR: A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly as mentioned in this paper, with a broad range of technical questions to ensure comprehensive understanding of the concepts covered.
Journal ArticleDOI
The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing
TL;DR: This article identifies additive manufacturing implementation challenges, highlights its evolving technologies and trends and their impact on the world of tomorrow, discusses its advantages over traditional manufacturing, explores itsimpact on the supply chain, and investigates its transformative potential and impact on various industry segments.
Journal ArticleDOI
Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications.
TL;DR: An overview of a diverse range of fibers, their properties, functionality, classification, and various fiber composite manufacturing techniques is presented to discover the optimized fiber-reinforced composite material for significant applications.
Journal ArticleDOI
Fabrication of Continuous Carbon, Glass and Kevlar fibre reinforced polymer composites using Additive Manufacturing
TL;DR: In this paper, the performance of continuous carbon, Kevlar and glass fibre reinforced composites manufactured using the fused deposition modelling (FDM) additive manufacturing technique was evaluated both in tension and flexure.
Book
Structural Composite Materials
TL;DR: In this article, a comprehensive overview of composite materials at the introductory to intermediate level from an industrial perspective is presented, with an emphasis on continuous fiber polymer matrix composites, where practical aspects are emphasized more than theory.
Related Papers (5)
Fracture toughness enhancement of carbon fiber–reinforced polymer composites utilizing additive manufacturing fabrication:
Firas Akasheh,Heshmat A. Aglan +1 more