Journal ArticleDOI
Pool boiling and flow boiling on micro- and nanostructured surfaces
Mostafa Shojaeian,Ali Koşar +1 more
TLDR
In this paper, the results reported in recent investigations on pool boiling and flow boiling from micro/nanostructured surfaces were included, and a comprehensive overview was provided. But, the results of these studies were limited to the micro and nano scale.About:
This article is published in Experimental Thermal and Fluid Science.The article was published on 2015-05-01. It has received 179 citations till now. The article focuses on the topics: Boiling & Critical heat flux.read more
Citations
More filters
Journal ArticleDOI
Review of pool boiling enhancement by surface modification
TL;DR: In this paper, a comprehensive review of published articles addressing passive enhancement of pool boiling using surface modification techniques is provided, including macroscale, microscale, and nanoscale surfaces, as well as multiscale (hybrid-scale), and hybrid-wettability techniques.
Journal ArticleDOI
Review of boiling heat transfer enhancement on micro/nanostructured surfaces
TL;DR: In this paper, several researches on the micro/nanostructured surfaces that have been designed to enhance boiling heat transfer are introduced and closely reviewed, and the special features of the existing surfaces capable of enhancing BoT are summarized.
Journal ArticleDOI
A Review on efficient thermal management of air- and liquid-cooled data centers: From chip to the cooling system
TL;DR: In this article, the state-of-the-art of multi-level thermal management techniques for both air- and liquid-cooled data centers is reviewed. But the main focus is on the sources of inefficiencies and the improvement methods with their configuration features and performances at each level.
Heater orientation effects on pool boiling of micro-porous-enhanced surfaces in saturated FC-72
J. Y. Chang,Seung M. You +1 more
TL;DR: In this article, the effects of surface orientation on pool boiling characteristics of a highly wetting fluid from a flush-mounted micro-porous-enhanced square heater were investigated by applying copper and aluminum particle coatings to the heater surfaces.
Journal ArticleDOI
The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: A review
Davoud Jafari,Wessel W. Wits +1 more
TL;DR: The aim of this research is to review the advancement in design complexities of different industrial heat transfer devices incorporating metal SLM fabrication, and presents the opportunities and challenges related to the application of SLM technology in connection to novel HXs and HSs, as well as heat pipes (HPs).
References
More filters
ReportDOI
Hydrodynamic Aspects of Boiling Heat Transfer
TL;DR: In this paper, the critical heat flux and the minimum heat flux are derived from these hydrodynamic limits, and results of investigations of nucleate boilin g are discussed and the theory of bubble growth is extended to include the effect of nonuniform temperature fields.
Journal ArticleDOI
A Theoretical model to predict pool boiling CHF incorporating effects of contact angle and orientation
TL;DR: In this paper, a theoretical model is developed to describe the hydrodynamic behavior of the vapor-liquid interface of a bubble at the heater surface leading to the initiation of critical heat flux (CHF) condition.
Journal ArticleDOI
Nanowires for enhanced boiling heat transfer.
Renkun Chen,Ming-Chang Lu,Vinod Srinivasan,Zhijie Wang,Hyung Hee Cho,Arun Majumdar,Arun Majumdar +6 more
TL;DR: The high surface tension forces offered by liquids in nanowire arrays made of Si and Cu can be exploited to increase both the critical heat flux (CHF) and the heat transfer coefficient (HTC) by more than 100%.
Journal ArticleDOI
The maximum and minimum values of the heat Q transmitted from metal to boiling water under atmospheric pressure
TL;DR: In this paper, the authors show that the quantity of heat transmitted from a metal surface to boiling water increases as the temperature difference ΔT is increased, but after the ΔT has reached a certain limit, quantity Q decreases with further increase in ΔT.