Buried heterostructure (BH) lasers are routinely fabricated for telecom applications. Development of quantum cascade
lasers (QCL) for sensing applications has largely benefited from the technological achievements established for telecom
lasers. However, new demands are to be met with when fabricating BH-QCLs. For example, hetero-cascade and multistack
QCLs, with several different active regions stacked on top of each other, are used to obtain a broad composite gain
or increased peak output power. Such structures have thick etch ridges which puts severe demand in carrying out
regrowth of semi-insulating layer around very deeply etched (< 10 μm) ridges in short time to realize BH-QCL. For
comparison, telecom laser ridges are normally only <5 μm deep. We demonstrate here that hydride vapour phase epitaxy
(HVPE) is capable of meeting this new demand adequately through the fabrication of BH-QCLs in less than 45 minutes
for burying ridges etched down to 10-15 μm deep. This has to be compared with the normally used regrowth time of
several hours, e.g., in a metal organic vapour phase epitaxy (MOVPE) reactor. This includes also micro-stripe lasers
resembling grating-like ridges for enhanced thermal dissipation in the lateral direction. In addition, we also demonstrate
HVPE capability to realize buried heterostructure photonic crystal QCLs for the first time. These buried lasers offer
flexibility in collecting light from the surface and relatively facile device characterization feasibility of QCLs in general;
but the more important benefits of such lasers are enhanced light matter interaction leading to ultra-high cavity Q-factors,
tight optical confinement, possibility to control the emitted mode pattern and beam shape and substantial reduction in
laser threshold.

Quantum cascade lasers: 2D photonic crystal laser

Hydride vapour phase epitaxy assisted buried heterostructure quantum cascade lasers for sensing applications

/pdf/quantum-cascade-lasers-2d-photonic-crystal-laser-25yif7m8za.pdf

Photonic-crystal lasers operating on Γ-point band-edge states of a photonic structure naturally exploit the so-called “nonradiative” modes. As the surface output coupling efficiency of these modes is low, they have relatively high Q factors, which favor lasing. We propose a new 2D photonic-crystal design that is capable of reversing this mode competition and achieving lasing on the radiative modes instead. Previously, this has only been shown in 1D structures, where the central idea is to introduce anisotropy into the system, both at unit-cell and resonator scales. By applying this concept to 2D photonic-crystal patterned terahertz frequency quantum cascade lasers, surface-emitting devices with diffraction-limited beams are demonstrated, with 17 mW peak output power.

/pdf/thz-quantum-cascade-lasers-operating-on-the-radiative-modes-txw7wjj5mz.pdf

Quantum cascade lasers: 2D photonic crystal laser

Citations

Hydride vapour phase epitaxy assisted buried heterostructure quantum cascade lasers for sensing applications

References

THz quantum cascade lasers operating on the radiative modes of a 2D photonic crystal.

Related Papers (5)

Gain photonic crystal terahertz quantum-cascade lasers

Novel photonic crystal quantum cascade laser platform

Quantum-cascade photonic crystal laser

Vertical emitting Terahertz Quantum Cascade Lasers based on photonic crystal cavities

THz photonic-crystal lasers with boundary-conditions control