scispace - formally typeset
Journal ArticleDOI

Texture Development by Templated Grain Growth in Liquid-Phase-Sintered α-Alumina

TLDR
In this paper, the distribution and orientation of platelet-shaped particles of α-alumina in a fine-grained alumina matrix is shown to template texture development via anisotropic grain growth.
Abstract
The distribution and orientation of platelet-shaped particles of α-alumina in a fine-grained alumina matrix is shown to template texture development via anisotropic grain growth. The textured microstructure ranges from 4 wt% oriented platelet particles in calcined samples to nearly 100% oriented α-Al2O3 grains after sintering at 1400°C. A CaO + SiO2 liquid phase creates favorable thermodynamic and kinetic conditions for anisotropic grain growth and grain reorientation during sintering. Important criteria for templated grain growth include (1) anisotropic crystal structure and growth, (2) high thermodynamic driving force for template grain growth, and (3) modification of diffusion in the system to continuously provide material to the anisotropically growing template grains.

read more

Content maybe subject to copyright    Report

Citations
More filters
Journal ArticleDOI

Strong, Tough and Stiff Bioinspired Ceramics from Brittle Constituents

TL;DR: A bioinspired approach based on widespread ceramic processing techniques for the fabrication of bulk ceramics without a ductile phase and with a unique combination of high strength, high toughness, and high stiffness is reported.
Journal ArticleDOI

Templated Grain Growth of Textured Bismuth Titanate

TL;DR: In this article, a textured bismuth titanate, Bi4Ti3O12 (BiT), was produced by templated grain growth (TGG), where Molten-salt-synthesized BiT platelets were dispersed in a matrix of 200 nm BiT powder and aligned by tape casting.
Journal ArticleDOI

Magnetically assisted slip casting of bioinspired heterogeneous composites.

TL;DR: An additive manufacturing platform able to fabricate complex-shaped parts exhibiting bioinspired heterogeneous microstructures with locally tunable texture, composition and properties, as well as unprecedentedly high volume fractions of inorganic phase (up to 100%).
Journal ArticleDOI

Magnetically-Assisted Slip Casting of Bioinspired Heterogeneous Composites

TL;DR: In this article, an additive manufacturing platform is proposed to fabricate complex-shaped parts exhibiting bio-inspired heterogeneous microstructures with locally tunable texture, composition and properties and unprecedentedly high volume fractions of inorganic phase.
References
More filters
Journal ArticleDOI

On the theory of normal and abnormal grain growth

TL;DR: In this article, a growth equation for individual grains in single-phase materials is suggested, which is used to calculate a rate equation for normal grain growth and the size distribution in the material.
Journal ArticleDOI

In situ-toughened silicon carbide

TL;DR: In this article, an atmospheric pressure sintering strategy for obtaining dense SiC-based materials with microstructures consisting of uniformly distributed elongate-shaped [alpha]-SiC grains and relatively high amounts of second-phase yttrium aluminum garnet (YAG) was presented.
Journal ArticleDOI

Controlled Transformation and Sintering of a Boehmite Sol-Gel by α-Alumina Seeding

TL;DR: In this article, the transformation, microstructural development, and densification of an α-alumina-seeded boehmite sol-gel was studied, and α-Alumina particles are shown to act as nuclei for the trans-formation of θ- to α- alumina and to result in an increase in the transformation kinetics and lowering of the transformation temperature by as much as 170°C.
Journal ArticleDOI

Processing Strategy for Producing Highly Anisotropic Silicon Nitride

TL;DR: In this paper, a tape casting of raw powder slurry seeded with rod-like Si{sub 3}N{sub 4} particles was obtained, followed by a gas pressure sintering under 1 MPa nitrogen pressure.
Journal ArticleDOI

Microstructure Control of Silicon Nitride by Seeding with Rodlike β‐Silicon Nitride Particles

TL;DR: In this paper, the effect of seeding on microstructure development and mechanical properties of silicon nitride was investigated by the use of morphologically regulated rodlike β-Si3N4 singlecrystal particles with a diameter of 1 μm and a length of 4 μm as seed crystals.
Related Papers (5)