The yield stress—a review or ‘παντα ρει’—everything flows?

TLDR: In this paper, the authors give an account of the development of the idea of yield stress for solids, soft solids and structured liquids from the beginning of this century to the present time.

Abstract: An account is given of the development of the idea of a yield stress for solids, soft solids and structured liquids from the beginning of this century to the present time. Originally, it was accepted that the yield stress of a solid was essentially the point at which, when the applied stress was increased, the deforming solid first began to show liquid-like behaviour, i.e. continual deformation. In the same way, the yield stress of a structured liquid was originally seen as the point at which, when decreasing the applied stress, solid-like behaviour was first noticed, i.e. no continual deformation. However as time went on, and experimental capabilities increased, it became clear, first for solids and lately for soft solids and structured liquids, that although there is usually a small range of stress over which the mechanical properties change dramatically (an apparent yield stress), these materials nevertheless show slow but continual steady deformation when stressed for a long time below this level, having shown an initial linear elastic response to the applied stress. At the lowest stresses, this creep behaviour for solids, soft solids and structured liquids can be described by a Newtonian-plateau viscosity. As the stress is increased the flow behaviour usually changes into a power-law dependence of steady-state shear rate on shear stress. For structured liquids and soft solids, this behaviour generally gives way to Newtonian behaviour at the highest stresses. For structured liquids this transition from very high (creep) viscosity (>106 Pa.s) to mobile liquid (