Transformation of monetite to hydroxyapatite in bioactive coatings on titanium

TLDR: In this article, a coating of crystalline monetite oriented along the [112] axis was electrochemically deposited on titanium substrates and was subsequently converted to hydroxyapatite by immersion in alkaline solutions.

Abstract: Calcium phosphates have a wide range of pH stability, depending on their Ca/P ratio. Under physiological conditions (pH ≈7), the most stable calcium phosphate is hydroxyapatite, Ca 10 (PO 4 ) 6 (OH) 2 . Acidic calcium phosphates, like dicalcium phosphate, CaHPO 4 (monetite) and dicalcium phosphate dihydrate, CaHPO 4 ·2H 2 O (brushite), are thermodynamically unstable under pH values greater than 6–7 and undergo transformation into more stable calcium phosphates. It means that, when placed in vivo (pH ≈7), acidic calcium phosphates convert to hydroxyapatite. In the present study, a coating of crystalline monetite oriented along the [112] axis was electrochemically deposited on titanium substrates. This monetite coating was subsequently converted to hydroxyapatite by immersion in alkaline solutions. The result was a crystalline hydroxyapatite coating oriented along the [002] axis. Different alkaline solutions produced the same result. Studying the effect of immersion time on the transformation indicated that 4 h were required to complete the conversion from monetite to hydroxyapatite. The transformation occurred by a dissolution–reprecipitation mechanism, i.e. the monetite coating was continuously dissolved and reprecipitated as hydroxyapatite. This combined electrochemical deposition and chemical conversion process produced hydroxyapatite coatings with satisfactory adhesion to the substrate and a thickness between 10 and 30 μm.