There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

There is still an ongoing effort to search for sustainable, clean and highly efficient energy generation to satisfy the energy needs of modern society. Among various advanced technologies, electrocatalysis for the oxygen evolution reaction (OER) plays a key role and numerous new electrocatalysts have been developed to improve the efficiency of gas evolution. Along the way, enormous effort has been devoted to finding high-performance electrocatalysts, which has also stimulated the invention of new techniques to investigate the properties of materials or the fundamental mechanism of the OER. This accumulated knowledge not only establishes the foundation of the mechanism of the OER, but also points out the important criteria for a good electrocatalyst based on a variety of studies. Even though it may be difficult to include all cases, the aim of this review is to inspect the current progress and offer a comprehensive insight toward the OER. This review begins with examining the theoretical principles of electrode kinetics and some measurement criteria for achieving a fair evaluation among the catalysts. The second part of this review acquaints some materials for performing OER activity, in which the metal oxide materials build the basis of OER mechanism while non-oxide materials exhibit greatly promising performance toward overall water-splitting. Attention of this review is also paid to in situ approaches to electrocatalytic behavior during OER, and this information is crucial and can provide efficient strategies to design perfect electrocatalysts for OER. Finally, the OER mechanism from the perspective of both recent experimental and theoretical investigations is discussed, as well as probable strategies for improving OER performance with regards to future developments.

Electrocatalysis for the oxygen evolution reaction: recent development and future perspectives

In this chapter, we will restrict our attention to the ferrites and a few other closely related materials. The great interest in ferrites stems from their unique combination of a spontaneous magnetization and a high electrical resistivity. The observed magnetization results from the difference in the magnetizations of two non-equivalent sub-lattices of the magnetic ions in the crystal structure. Materials of this type should strictly be designated as “ferrimagnetic” and in some respects are more closely related to anti-ferromagnetic substances than they are to ferromagnetics in which the magnetization results from the parallel alignment of all the magnetic moments present. We shall not adhere to this special nomenclature except to emphasize effects, which are due to the existence of the sub-lattices.

Ferromagnetic materials

Alloying has long been used to confer desirable properties to materials. Typically, it involves the addition of relatively small amounts of secondary elements to a primary element. For the past decade and a half, however, a new alloying strategy that involves the combination of multiple principal elements in high concentrations to create new materials called high-entropy alloys has been in vogue. The multi-dimensional compositional space that can be tackled with this approach is practically limitless, and only tiny regions have been investigated so far. Nevertheless, a few high-entropy alloys have already been shown to possess exceptional properties, exceeding those of conventional alloys, and other outstanding high-entropy alloys are likely to be discovered in the future. Here, we review recent progress in understanding the salient features of high-entropy alloys. Model alloys whose behaviour has been carefully investigated are highlighted and their fundamental properties and underlying elementary mechanisms discussed. We also address the vast compositional space that remains to be explored and outline fruitful ways to identify regions within this space where high-entropy alloys with potentially interesting properties may be lurking. High-entropy alloys have greatly expanded the compositional space for alloy design. In this Review, the authors discuss model high-entropy alloys with interesting properties, the physical mechanisms responsible for their behaviour and fruitful ways to probe and discover new materials in the vast compositional space that remains to be explored.

High-entropy alloys

Magnetic cooling could be a radically different energy solution that could replace conventional vapour compression refrigeration in the future. It is now shown that a Heusler-type magnetocaloric alloy exhibits a remarkable cooling capability due to the effect of a sharp structural transformation at a specific temperature. The finding may be of relevance beyond Heusler alloys and represents an important step towards the implementation of cooling systems based on magnetocaloric materials.

Giant magnetocaloric effect driven by structural transitions

Smallest variations of the lattice parameter result in significant changes in material properties. Whereas in bulk, lattice parameters can only be changed by composition or temperature, coherent epitaxial growth of thin films on single crystals allows adjusting the lattice parameters independently. Up to now only discrete values were accessible by using different buffer or substrate materials. We realize a lateral variation of in-plane lattice parameters using combinatorial film deposition of epitaxial Cu-Au on a 4-in. Si wafer. This template gives the possibility to adjust the in-plane lattice parameter over a wide range from 0.365 nm up to 0.382 nm.

The Bain library: A Cu-Au buffer template for a continuous variation of lattice parameters in epitaxial films

2010 WILEY-VCH Verlag Gmb Microactuators and sensors based on magnetic shape-memory (MSM) alloys will benefit from the large strain close to 10% obtained in these materials. These strains exceed the values obtainable by magnetostriction or piezoelectricity by more than one order of magnitude. Thus, they can be used directly for most applications, avoiding additional complications of mechanical amplification. As the highest strains to-date are obtained in bulk single crystals, the use of epitaxial films is most promising for microsystems, owing to their single-crystal-like microstructure. With reduced actuator size, however, the influence of interfaces, and in particular of oxidation, becomes more important. Though the prototype Ni2MnGa system is relatively inert, an oxide surface layer may hinder the martensitic transformation in thin films. For the Fe70Pd30 system [8] oxidation is expected not to be critical due to the high content of a noble element. In Fe70Pd30 the martensitic transformation occurs around room temperature (RT). First reports indicate that epitaxial growth of thin Fe70Pd30 films can be obtained already at RT. For epitaxial growth of the NiMnGa system, a minimum temperature of 350 8C is required. Recently it was shown that epitaxial growth of Fe70Pd30 is possible on various metallic buffers. Due to coherent growth, huge tetragonal distortions were stabilized in 50 nm thick films, covering most of the Bain transformation path from face-centered cubic (fcc) to bodycentered cubic (bcc) structure. Here, we show how this approach can be extended to obtain freestanding films of micrometer thickness, thus fulfilling both key requirements for the integration into microsystems as well as prerequisites for MSM films, that is, martensitic, ferromagnetic at RT, freestanding, and single-crystalline-like. In addition, our experiments reveal that the transformation behavior in these films differs from in the bulk. While this topic has been an extensive playground for theory, experiments are rare, since a detailed analysis often requires epitaxial films. Recently, experiments on epitaxial films, for example, have revealed a variant selection by the rigid interface to the substrate or by reduction of the magnetic stray field energy in freestanding films. The present experiments are more fundamental since they show that circumventing the forward martensitic transformation by forming the martensitic structure directly at RT hinders the nucleation of the reverse transformation to austenite. This remarkable suppression of the transformation not only gives a better understanding of the martensitic transformation but also opens innovative routes for microsensors. Films of Fe70Pd30, 1.2mm thick, were deposited with a low deposition rate of 0.024 nms 1 at 30W sputtering power in a magnetron sputtering system on Au-buffered MgO(001) oriented, epi-polished substrates. The crystal structure of the Fe70Pd30 films was analyzed by four-circle and temperature-dependent two-circle X-ray diffraction (XRD), where x and w denote the tilt and rotational angles, respectively. The u–2u scans (see Fig. 1a) show the 200 Au reflection of the buffer layer (2u1⁄4 44.448) as well as the Fe70Pd30 002 reflection (57.388). Assuming a constant volume of the Fe70Pd30 unit cell compared to the cubic austenite, [15] the lattice parameters a and c were calculated to be 0.287 nm and 0.321 nm ( 0.001 nm), respectively, which constitutes a c/a ratio of 1.12. Temperature-dependent XRD measurements showed no change in the crystal structure in the accessible temperature range between 150 and 375K. The pole figure of the 101 reflection reveals a four-fold symmetry (Fig. 1b). The maximum intensity is obtained at an average of 47.278 at w1⁄4 458. The peak in the w direction is rather sharp with a small full width at half maximum (FWHM), indicating well-oriented growth of the body-centered tetragonal (bct) unit cell rotated by 458compared to the edges of the MgO cell. The larger FWHM in the x direction indicates relaxation of the lattice. There are no indications that twinning has occurred in the film. The sample for transmission electron microscopy (TEM) investigations was prepared by focused ion beam (FIB) lift-out

Artificial Single Variant Martensite in Freestanding Fe70Pd30 Films Obtained by Coherent Epitaxial Growth

https://www.onlinelibrary.wiley.com/doi/pdf/10.1002/adom.202100417

Alfred Ludwig

Papers

The Bain library: A Cu-Au buffer template for a continuous variation of lattice parameters in epitaxial films

Artificial Single Variant Martensite in Freestanding Fe70Pd30 Films Obtained by Coherent Epitaxial Growth

Combining Switchable Phase-Change Materials and Phase-Transition Materials for Thermally Regulated Smart Mid-Infrared Modulators

Zooming-in – Visualization of active site heterogeneity in high entropy alloy electrocatalysts using scanning electrochemical cell microscopy

Effects of annealing time on the structural and magnetic properties of L10 FePt thin films