1.0. Introduction 4044 2.0. Biomass Chemistry and Growth Rates 4047 2.1. Lignocellulose and Starch-Based Plants 4047 2.2. Triglyceride-Producing Plants 4049 2.3. Algae 4050 2.4. Terpenes and Rubber-Producing Plants 4052 3.0. Biomass Gasification 4052 3.1. Gasification Chemistry 4052 3.2. Gasification Reactors 4054 3.3. Supercritical Gasification 4054 3.4. Solar Gasification 4055 3.5. Gas Conditioning 4055 4.0. Syn-Gas Utilization 4056 4.1. Hydrogen Production by Water−Gas Shift Reaction 4056

/pdf/synthesis-of-transportation-fuels-from-biomass-chemistry-3sckhzoqoz.pdf

Synthesis of transportation fuels from biomass: chemistry, catalysts, and engineering.

Characteristics of hemicellulose, cellulose and lignin pyrolysis

Fast pyrolysis utilizes biomass to produce a product that is used both as an energy source and a feedstock for chemical production. Considerable efforts have been made to convert wood biomass to liquid fuels and chemicals since the oil crisis in mid-1970s. This review focuses on the recent developments in the wood pyrolysis and reports the characteristics of the resulting bio-oils, which are the main products of fast wood pyrolysis. Virtually any form of biomass can be considered for fast pyrolysis. Most work has been performed on wood, because of its consistency and comparability between tests. However, nearly 100 types of biomass have been tested, ranging from agricultural wastes such as straw, olive pits, and nut shells to energy crops such as miscanthus and sorghum. Forestry wastes such as bark and thinnings and other solid wastes, including sewage sludge and leather wastes, have also been studied. In this review, the main (although not exclusive) emphasis has been given to wood. The literature on woo...

Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review

Biochar as a sorbent for contaminant management in soil and water: a review.

The application of bio-char (charcoal or biomass-derived black carbon (C)) to soil is pro- posed as a novel approach to establish a significant, long-term, sink for atmospheric carbon dioxide in terrestrial ecosystems. Apart from positive effects in both reducing emissions and increasing the sequestration of greenhouse gases, the production of bio-char and its application to soil will deliver im- mediate benefits through improved soil fertility and increased crop production. Conversion of biomass C to bio-char C leads to sequestration of about 50% of the initial C compared to the low amounts retained after burning (3%) and biological decomposition (<10-20% after 5-10 years), therefore yielding more stable soil C than burning or direct land application of biomass. This efficiency of C conversion of biomass to bio-char is highly dependent on the type of feedstock, but is not significantly affected by the pyrolysis temperature (within 350-500 ◦ C common for pyrolysis). Existing slash-and- burn systems cause significant degradation of soil and release of greenhouse gases and opportunies may exist to enhance this system by conversion to slash-and-char systems. Our global analysis revealed that up to 12% of the total anthropogenic C emissions by land use change (0.21 Pg C) can be off-set annually in soil, if slash-and-burn is replaced by slash-and-char. Agricultural and forestry wastes such as forest residues, mill residues, field crop residues, or urban wastes add a conservatively estimated 0.16 Pg C yr −1 . Biofuel production using modern biomass can produce a bio-char by-product through pyrolysis which results in 30.6 kg C sequestration for each GJ of energy produced. Using published projections of the use of renewable fuels in the year 2100, bio-char sequestration could amount to 5.5-9.5 Pg C yr −1 if this demand for energy was met through pyrolysis, which would exceed current emissions from fossil fuels (5.4 Pg C yr −1 ). Bio-char soil management systems can deliver tradable C emissions reduction, and C sequestered is easily accountable, and verifiable.

/pdf/bio-char-sequestration-in-terrestrial-ecosystems-a-review-11nd7n5wu0.pdf

Bio-char sequestration in terrestrial ecosystems - a review

Influence of mineral matter on biomass pyrolysis characteristics

Pyrolysis characteristics of biomass and biomass components

This paper reports the studies made on the vacuum pyrolysis of deashed sugarcane bagasse, on the pyrolysis products. The present work is with an objective to understand the change in the quantity and quality of the oil fraction obtained from pyrolysis, upon pretreatment for deashing of original biomass. Ash, in the entrained char is believed to be catalyzing the polymerization reaction in the oils and thereby increases the viscosity. Three different pre-treatment processes used for deashing are water leaching, mild acid treatment with HCl and mild acid treatment with HF.1 The study indicates the remarkable influence of pretreatment process for deashing, by enhancing the total energy distribution in oil fraction of the pyrolysis products. This is attributed to selective removal of ash elements along with removal of extractives and hemicellulose in different proportions. However, it was found that the pre-treatments do not improve the stability of oil. The water leachate, as expected, showed potential of making ethanol via fermentation.

Influence of pretreatment for deashing of sugarcane bagasse on pyrolysis products

Heating value of biomass and biomass pyrolysis products

Biomass in the form of cashew nut shell represents a renewable and abundant source of energy in India. Cashew nut shell (CNS) was pyrolysed in a fixed bed pyrolysis reactor under vacuum. The CNS on heating upto 175°C produced dark brown oil (oil CO1), which was extracted, and the CNS, after the removal of oil CO1, was pyrolysed under vacuum. The pyrolysis vapours were condensed to get a combustible oil fraction (oil CO2) as well as a noncombustible aqueous fraction. The detailed chemical compositional analysis of both the oils as well as aqueous fractions were carried out by various techniques like liquid column chromatography 1 HNMR , 13 CNMR , FTIR, GC-MS. The CNS oils (CO1 and CO2) were found to be a renewable natural resource of unsaturated phenols with long linear chains and marked absence of anacardic acid. Unlike other bio oils, the CNS oils have been found to be fairly stable. The oils were completely miscible in diesel and were found to have low corrosivity towards Copper and Stainless steel, and thus promise to be a potential fuel.

Anuradda Ganesh

Papers

Influence of mineral matter on biomass pyrolysis characteristics

Pyrolysis characteristics of biomass and biomass components

Influence of pretreatment for deashing of sugarcane bagasse on pyrolysis products

Heating value of biomass and biomass pyrolysis products

Bio oil from pyrolysis of cashew nut shell-characterisation and related properties