Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

Phd by thesis

A balanced mechanics-materials approach and coverage of the latest developments in biomaterials and electronic materials, the new edition of this popular text is the most thorough and modern book available for upper-level undergraduate courses on the mechanical behavior of materials To ensure that the student gains a thorough understanding the authors present the fundamental mechanisms that operate at micro- and nano-meter level across a wide-range of materials, in a way that is mathematically simple and requires no extensive knowledge of materials This integrated approach provides a conceptual presentation that shows how the microstructure of a material controls its mechanical behavior, and this is reinforced through extensive use of micrographs and illustrations New worked examples and exercises help the student test their understanding Further resources for this title, including lecture slides of select illustrations and solutions for exercises, are available online at wwwcambridgeorg/97800521866758

/pdf/mechanical-behavior-of-materials-244bo22qlo.pdf

Mechanical Behavior of Materials

Biological materials: Structure and mechanical properties

This article presents an overview of the developments in stainless steels made since the 1990s. Some of the new applications that involve the use of stainless steel are also introduced. A brief introduction to the various classes of stainless steels, their precipitate phases and the status quo of their production around the globe is given first. The advances in a variety of subject areas that have been made recently will then be presented. These recent advances include (1) new findings on the various precipitate phases (the new J phase, new orientation relationships, new phase diagram for the Fe–Cr system, etc.); (2) new suggestions for the prevention/mitigation of the different problems and new methods for their detection/measurement and (3) new techniques for surface/bulk property enhancement (such as laser shot peening, grain boundary engineering and grain refinement). Recent developments in topics like phase prediction, stacking fault energy, superplasticity, metadynamic recrystallisation and the calculation of mechanical properties are introduced, too. In the end of this article, several new applications that involve the use of stainless steels are presented. Some of these are the use of austenitic stainless steels for signature authentication (magnetic recording), the utilisation of the cryogenic magnetic transition of the sigma phase for hot spot detection (the Sigmaplugs), the new Pt-enhanced radiopaque stainless steel (PERSS) coronary stents and stainless steel stents that may be used for magnetic drug targeting. Besides recent developments in conventional stainless steels, those in the high-nitrogen, low-Ni (or Ni-free) varieties are also introduced. These recent developments include new methods for attaining very high nitrogen contents, new guidelines for alloy design, the merits/demerits associated with high nitrogen contents, etc.

Recent developments in stainless steels

Many traditional approaches for strengthening steels typically come at the expense of useful ductility, a dilemma known as strength-ductility trade-off. New metallurgical processing might offer the possibility of overcoming this. Here we report that austenitic 316L stainless steels additively manufactured via a laser powder-bed-fusion technique exhibit a combination of yield strength and tensile ductility that surpasses that of conventional 316L steels. High strength is attributed to solidification-enabled cellular structures, low-angle grain boundaries, and dislocations formed during manufacturing, while high uniform elongation correlates to a steady and progressive work-hardening mechanism regulated by a hierarchically heterogeneous microstructure, with length scales spanning nearly six orders of magnitude. In addition, solute segregation along cellular walls and low-angle grain boundaries can enhance dislocation pinning and promote twinning. This work demonstrates the potential of additive manufacturing to create alloys with unique microstructures and high performance for structural applications.

https://lib.dr.iastate.edu/cgi/viewcontent.cgi?article=1443&context=ameslab_manuscripts

Additively manufactured hierarchical stainless steels with high strength and ductility

– Mg-3Al-1Zn (AZ31) alloy was caliber rolled isothermally at the temperature of 300 °C to develop fine grains of 3.6 μm. Annealing was carried out at various times and temperatures. Along with microstructure, annealing affects the hardness and hardness penetration depth. The hardness penetration depth of caliber rolled bar during annealing at 300 to 450 °C was investigated for 5 to 60 minutes. The change in hardness penetration depth were analysed and the mechanisms involved were discussed.

Effect of Annealing on Hardness Penetration of Caliber Rolled Mg-3Al-1Zn (AZ31) Alloy

Tension–Compression Flow Asymmetry as a Function of Alloy Composition in the Al-Si System

Some inaccuracies are possible during the near-surface residual stress measurement of textured material by X-ray diffraction using the standard multiexposure technique. Diffraction intensities depend on factors like inclination of the sample, the rotation of the beam, and the position of detectors. Low intensity due to texture can result in increased percentage error observed stress values. Anisotropy of elastic constants in textured materials can further increase the errors in measured stress. In the present study, the effect of texture on residual stress has been studied for seamless Ti-3wt%Al-2Vwt% tubes, in pilgered and annealed conditions, by superimposing the residual stress measurements on the pole figure obtained by texture measurement. A general approach has been developed for accurate determination of the stress tensor in textured material. This consists of the selection of inclinations giving rise to high intensity peak, the selection of rotation angles symmetric to the pole figure to get similar intensity from both the detectors (where this is not possible one detector with low intensity is shut off), and the calculation of the bulk X-ray elastic constants using the single crystal elastic data and texture. Cold worked Ti-3wt%Al-2Vwt% tubes had the highest stress along the rolling direction and that is compressive in nature. The principal residual stresses in the pilgered tubes were along the rolling and transverse directions, and annealing leads to reduction and reorientation of the stresses.

Influence of Crystallographic Texture on X-ray Residual Stress Measurement for Ti-3wt% Al-2 Vwt% Tube Material

Separate compression samples of VT20 Ti-alloy Ti-5.9Al-2.1Zr-1.6V-1.4Mo (wt%), charged with 0, 0.15 and 0.36 wt%H, were deformed to true strain of 0.70 at a strain rates of 1×10−3 and 1×10−1 s−1 at test temperatures of 600 and 850 °C. H charging led to the varying microstructures ranging from equiaxed to lamellar ones depending on H level. In the course of deformation, their occurred refinement of microstructures with reduced interlamellar spacing depending on the test conditions. The contributions of these sources to microstructure evolution and flow properties were examined in an attempt to explore some correlation between them. An attempt is made to understand the effect of H present on the microstructure and flow properties to account for the variations in the parameters of the constitutive relationship.

Bhagwati Prasad Kashyap

Papers

Effect of Annealing on Hardness Penetration of Caliber Rolled Mg-3Al-1Zn (AZ31) Alloy

Tension–Compression Flow Asymmetry as a Function of Alloy Composition in the Al-Si System

Influence of Crystallographic Texture on X-ray Residual Stress Measurement for Ti-3wt% Al-2 Vwt% Tube Material

Effect of Concurrent Microstructure Evolution and Hydrogen Level on Flow Behavior of Near Alpha Ti-Alloy

Compressive Properties of Al‐B4C Composites over the Temperature Range of 25 ‐ 500°C