Communication at millimeter wave (mmWave) frequencies is defining a new era of wireless communication. The mmWave band offers higher bandwidth communication channels versus those presently used in commercial wireless systems. The applications of mmWave are immense: wireless local and personal area networks in the unlicensed band, 5G cellular systems, not to mention vehicular area networks, ad hoc networks, and wearables. Signal processing is critical for enabling the next generation of mmWave communication. Due to the use of large antenna arrays at the transmitter and receiver, combined with radio frequency and mixed signal power constraints, new multiple-input multiple-output (MIMO) communication signal processing techniques are needed. Because of the wide bandwidths, low complexity transceiver algorithms become important. There are opportunities to exploit techniques like compressed sensing for channel estimation and beamforming. This article provides an overview of signal processing challenges in mmWave wireless systems, with an emphasis on those faced by using MIMO communication at higher carrier frequencies.

An Overview of Signal Processing Techniques for Millimeter Wave MIMO Systems

A system is presented providing content to a plurality of handheld devices (including musical selections). The devices can access a server over the Internet via a WIFI or other similar wireless interconnection and can download songs requested by a user from the server or from other users using, e.g., a P2P protocol. All downloads are governed by applicable DRM rules. Content and playlists may also be pushed by a server from other sources and means including, e.g., podcasting, based on predetermined rules, favorite preferences of users, and other criteria.

Audio visual player apparatus and system and method of content distribution using the same

With the explosive growth of mobile data demand, the fifth generation (5G) mobile network would exploit the enormous amount of spectrum in the millimeter wave (mmWave) bands to greatly increase communication capacity. There are fundamental differences between mmWave communications and existing other communication systems, in terms of high propagation loss, directivity, and sensitivity to blockage. These characteristics of mmWave communications pose several challenges to fully exploit the potential of mmWave communications, including integrated circuits and system design, interference management, spatial reuse, anti-blockage, and dynamics control. To address these challenges, we carry out a survey of existing solutions and standards, and propose design guidelines in architectures and protocols for mmWave communications. We also discuss the potential applications of mmWave communications in the 5G network, including the small cell access, the cellular access, and the wireless backhaul. Finally, we discuss relevant open research issues including the new physical layer technology, software-defined network architecture, measurements of network state information, efficient control mechanisms, and heterogeneous networking, which should be further investigated to facilitate the deployment of mmWave communication systems in the future 5G networks.

A survey of millimeter wave communications (mmWave) for 5G: opportunities and challenges

According to Edholm’s law, the demand for point-to-point bandwidth in wireless short-range communications has doubled every 18 months over the last 25 years It can be predicted that data rates of around 5–10 Gb/s will be required in ten years In order to achieve 10 Gb/s data rates, the carrier frequencies need to be increased beyond 100 GHz Over the past ten years, several groups have considered the prospects of using sub-terahertz (THz) and THz waves (100–2000 GHz) as a means to transmit data wirelessly Some of the reported advantages of THz communications links are inherently higher bandwidth compared to millimeter wave links, less susceptibility to scintillation effects than infrared wireless links, and the ability to use THz links for secure communications Our goal of this paper is to provide a comprehensive review of wireless sub-THz and THz communications

Review of terahertz and subterahertz wireless communications

This tutorial presents an overview of the technological advances in millimeter-wave (mm-wave) circuit components, antennas, and propagation that will soon allow 60-GHz transceivers to provide multigigabit per second (multi-Gb/s) wireless communication data transfers in the consumer marketplace. Our goal is to help engineers understand the convergence of communications, circuits, and antennas, as the emerging world of subterahertz and terahertz wireless communications will require understanding at the intersections of these areas. This paper covers trends and recent accomplishments in a wide range of circuits and systems topics that must be understood to create massively broadband wireless communication systems of the future. In this paper, we present some evolving applications of massively broadband wireless communications, and use tables and graphs to show research progress from the literature on various radio system components, including on-chip and in-package antennas, radio-frequency (RF) power amplifiers (PAs), low-noise amplifiers (LNAs), voltage-controlled oscillators (VCOs), mixers, and analog-to-digital converters (ADCs). We focus primarily on silicon-based technologies, as these provide the best means of implementing very low-cost, highly integrated 60-GHz mm-wave circuits. In addition, the paper illuminates characterization techniques that are required to competently design and fabricate mm-wave devices in silicon, and illustrates effects of the 60-GHz RF propagation channel for both in-building and outdoor use. The paper concludes with an overview of the standardization and commercialization efforts for 60-GHz multi-Gb/s devices, and presents a novel way to compare the data rate versus power efficiency for future broadband devices.

http://faculty.poly.edu/~tsr/wp-content/uploads/publications/abstract17.pdf

State of the Art in 60-GHz Integrated Circuits and Systems for Wireless Communications

Thispaperreviews silicon millimeter-wave radiocircuits operating between60 and 100GHz. Transmitter andreceiver chips operating inthe60-GHzISM bandarehighlighted, wherethepackaged chipset hasshown datarates ashighas2Gb/sover5m forawireless high- definition video link. Inaddition, a60GHzPAwith23dBm output powerandaclass-E 60GHzPAwith>20%peakPAE arereviewed. Finally, 77and94GHzdownconverters are presented asa basisforanoutlook totheperformance achievable atthese higher frequency bands. IndexTerms - 60 GHz,millimeter wavebipolar integrated circuits, SiGe, V band.

Silicon millimeter-wave radio circuits at 60-100 GHz (invited)

A meeting management method, system, and non-transitory computer readable medium, include a target determination circuit configured to determine a target of an agenda for a meeting, the target of the agenda including which users correspond to a topic, a behavior capturing circuit configured to capture behavior of the users during the meeting, a tracking and identifying circuit configured to track the behavior of the users during the meeting and identify a user of the users corresponding to the behavior, and a difference determination circuit configured to determine if a difference between the behavior of the users and the target of the agenda is greater than a threshold value.

Meeting management system

Qubit control electronics composed of CMOS circuits are of critical interest for next generation quantum computing systems. A CMOS-based application specific integrated circuit (ASIC) fabricated in 14nm FinFET technology was used to generate and sequence qubit control waveforms and demonstrate a two-qubit cross resonance gate between fixed frequency transmons. The controller was thermally anchored to the T = 4K stage of a dilution refrigerator and the measured power was 23 mW per qubit under active control. The chip generated single--side banded output frequencies between 4.5 and 5.5 GHz with a maximum power output of -18 dBm. Randomized benchmarking (RB) experiments revealed an average number of 1.71 instructions per Clifford (IPC) for single-qubit gates, and 17.51 IPC for two-qubit gates. A single-qubit error per gate of $\epsilon_{\text{1Q}}$=8e-4 and two-qubit error per gate of $\epsilon_\text{2Q}$=1.4e-2 is shown. A drive-induced Z-rotation is observed by way of a rotary echo experiment; this observation is consistent with expected qubit behavior given measured excess local oscillator (LO) leakage from the CMOS chip. The effect of spurious drive induced Z-errors is numerically evaluated with a two-qubit model Hamiltonian, and shown to be in good agreement with measured RB data. The modeling results suggest the Z-error varies linearly with pulse amplitude.

Using Cryogenic CMOS Control Electronics To Enable A Two-Qubit Cross-Resonance Gate

Mehrbandantenne, die nachfolgendes umfasst: einen Dipolstrahler; einen gekoppelter Strahler; und einen mit dem Dipolstrahler verbundenen Zweigstrahler.

Integrierte Mehrbandantennen für EDV-Vorrichtungen

L'invention concerne une antenne destinee a etre integree sur un dispositif de traitement portatif L'antenne comprend un cadre support metallique d'affichage electronique (303) aux fins de mise a la terre d'un element conducteur, une paire d'elements rayonnants (301, 302) orientes depuis le cadre d'affichage (303), et un moyen de conduction d'un signal a double bande comprenant un premier composant, destine a porter un signal connecte aux premier et second elements rayonnant (301, 302), et un second composant de mise a la terre du moyen de conduction connecte au cadre d'affichage (303)

Brian P. Gaucher

Papers

Silicon millimeter-wave radio circuits at 60-100 GHz (invited)

Meeting management system

Using Cryogenic CMOS Control Electronics To Enable A Two-Qubit Cross-Resonance Gate

Integrierte Mehrbandantennen für EDV-Vorrichtungen

Antenne integree pour applications sur des ordinateurs portatifs