Utilization of polymers as biomaterials has greatly impacted the advancement of modern medicine. Specifically, polymeric biomaterials that are biodegradable provide the significant advantage of being able to be broken down and removed after they have served their function. Applications are wide ranging with degradable polymers being used clinically as surgical sutures and implants. In order to fit functional demand, materials with desired physical, chemical, biological, biomechanical and degradation properties must be selected. Fortunately, a wide range of natural and synthetic degradable polymers has been investigated for biomedical applications with novel materials constantly being developed to meet new challenges. This review summarizes the most recent advances in the field over the past 4 years, specifically highlighting new and interesting discoveries in tissue engineering and drug delivery applications.

/pdf/biomedical-applications-of-biodegradable-polymers-2db9gcyzxw.pdf

Biomedical Applications of Biodegradable Polymers

Polymer nanoparticles: Preparation techniques and size-control parameters

https://digital.csic.es/bitstream/10261/22454/3/SUPERCRITICAL%20FLUID%20EXTRACTION.pdf

Supercritical fluid extraction: Recent advances and applications

Fused deposition modeling (FDM) is a rapidly growing 3D printing technology. However, printing materials are restricted to acrylonitrile butadiene styrene (ABS) or poly (lactic acid) (PLA) in most Fused deposition modeling (FDM) equipment. Here, we report on a new high-performance printing material, polyether-ether-ketone (PEEK), which could surmount these shortcomings. This paper is devoted to studying the influence of layer thickness and raster angle on the mechanical properties of 3D-printed PEEK. Samples with three different layer thicknesses (200, 300 and 400 μm) and raster angles (0°, 30° and 45°) were built using a polyether-ether-ketone (PEEK) 3D printing system and their tensile, compressive and bending strengths were tested. The optimal mechanical properties of polyether-ether-ketone (PEEK) samples were found at a layer thickness of 300 μm and a raster angle of 0°. To evaluate the printing performance of polyether-ether-ketone (PEEK) samples, a comparison was made between the mechanical properties of 3D-printed polyether-ether-ketone (PEEK) and acrylonitrile butadiene styrene (ABS) parts. The results suggest that the average tensile strengths of polyether-ether-ketone (PEEK) parts were 108% higher than those for acrylonitrile butadiene styrene (ABS), and compressive strengths were 114% and bending strengths were 115%. However, the modulus of elasticity for both materials was similar. These results indicate that the mechanical properties of 3D-printed polyether-ether-ketone (PEEK) are superior to 3D-printed ABS.

https://www.mdpi.com/1996-1944/8/9/5271/pdf

Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS

https://ris.utwente.nl/ws/files/127602657/drug.pdf

Drug delivery systems and materials for wound healing applications.

Fibrin-based scaffold incorporating VEGF- and bFGF-loaded nanoparticles stimulates wound healing in diabetic mice

Micro/nanostructured polymeric systems for biomedical and pharmaceutical applications

Novel polymeric micro-nanostructure meshes as blood vessels substitute have been developed and investigated as a potential solution to the lack of functional synthetic small diameter vascular prosthesis. A commercial elastomeric polyurethane (Tecoflex EG-80A) and a natural biopolymer (gelatin) were successfully co-electrospun from different spinnerets on a rotating mandrel to obtain composite meshes benefiting from the mechanical characteristics of the polyurethane and the natural biopolymer cytocompatibility. Morphological analysis showed a uniform integration of micrometric (Tecoflex) and nanometric (gelatin) fibers. Exposure of the composite meshes to vapors of aqueous glutaraldehyde solution was carried out, to stabilize the gelatin fibers in an aqueous environment. Uniaxial tensile testing in wet conditions demonstrated that the analyzed Tecoflex-Gelatin specimens possessed higher extensibility and lower elastic modulus than conventional synthetic grafts, providing a closer matching to native vessels. Biological evaluation highlighted that, as compared with meshes spun from Tecoflex alone, the electrospun composite constructs enhanced endothelial cells adhesion and proliferation, both in terms of cell number and morphology. Results suggest that composite Tecoflex-Gelatin meshes could be promising alternatives to conventional vascular grafts, deserving of further studies on both their mechanical behaviour and smooth muscle cell compatibility.

Novel electrospun polyurethane/gelatin composite meshes for vascular grafts

Poly (hydroxyalkanoates) (PHAs) have recently attracted a great deal of academic and industrial interest for their biodegradability and biocompatibility making them suitable for environmental and biomedical applications. Poly(3-hydroxybutyrate-) (PHB-) and Poly(DL-lactide-co-glycolide) (PLGA-) based nanoparticles were prepared using the dialysis method as yet unreported for the preparation of nanoparticles based on PHB. Processing conditions were varied in order to evaluate their influence on morphology, drug encapsulation, and size of nanoparticles. The relevant results obtained give a theoretical understanding of the phenomenon occurring during colloidal formation. The adopted procedure allows for a relatively small diameter and homogeneity in size distribution of the PHB nanoparticles to be obtained compared to other methods like the one based on solvent evaporation which leads to particles on microscale. The biocompatibility of PHB and relative nanoparticles was investigated and both exhibited very good cytocompatibility.

/pdf/poly-hydroxyalkanoates-based-polymeric-nanoparticles-for-mgiacaogdk.pdf

Poly(hydroxyalkanoates)-Based Polymeric Nanoparticles for Drug Delivery

This research activity was aimed at the development of dual-scale scaffolds consisting of three-dimensional constructs of aligned poly(e-caprolactone) (PCL) microfilaments and electrospun poly(lactic-co-glycolic acid) (PLGA) fibers. PCL constructs composed by layers of parallel microsized filaments (0/90° lay-down pattern), with a diameter of around 365 μm and interfilament distance of around 191 μm, were produced using a melt extrusion-based additive manufacturing technique. PLGA electrospun fibers with a diameter of around 1 μm were collected on top of the PCL constructs with different thicknesses, showing a certain degree of alignment. Cell culture experiments employing the MC3T3 murine preosteoblast cell line showed good cell viability and adhesion on the dual-scale scaffolds. In particular, the influence of electrospun fibers on cell morphology and behavior was evident, as well as in creating a structural bridging for cell colonization in the interfilament gap.

/pdf/dual-scale-polymeric-constructs-as-scaffolds-for-tissue-1514zmsmdb.pdf

Cesare Errico

Papers

Fibrin-based scaffold incorporating VEGF- and bFGF-loaded nanoparticles stimulates wound healing in diabetic mice

Micro/nanostructured polymeric systems for biomedical and pharmaceutical applications

Novel electrospun polyurethane/gelatin composite meshes for vascular grafts

Poly(hydroxyalkanoates)-Based Polymeric Nanoparticles for Drug Delivery

Dual-Scale Polymeric Constructs as Scaffolds for Tissue Engineering