There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

Fast parallel algorithms for short-range molecular dynamics

The energy costs associated with separating tightly bound excitons (photoinduced electron-hole pairs) and extracting free charges from highly disordered low-mobility networks represent fundamental losses for many low-cost photovoltaic technologies. We report a low-cost, solution-processable solar cell, based on a highly crystalline perovskite absorber with intense visible to near-infrared absorptivity, that has a power conversion efficiency of 10.9% in a single-junction device under simulated full sunlight. This "meso-superstructured solar cell" exhibits exceptionally few fundamental energy losses; it can generate open-circuit photovoltages of more than 1.1 volts, despite the relatively narrow absorber band gap of 1.55 electron volts. The functionality arises from the use of mesoporous alumina as an inert scaffold that structures the absorber and forces electrons to reside in and be transported through the perovskite.

https://science.sciencemag.org/content/sci/early/2012/10/03/science.1228604.full.pdf

Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites

Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency. DSC research groups have been established around the worl ...

/pdf/dye-sensitized-solar-cells-50b0w2bhsr.pdf

Dye-Sensitized Solar Cells

The need to develop inexpensive renewable energy sources stimulates scientific research for efficient, low-cost photovoltaic devices.1 The organic, polymer-based photovoltaic elements have introduced at least the potential of obtaining cheap and easy methods to produce energy from light.2 The possibility of chemically manipulating the material properties of polymers (plastics) combined with a variety of easy and cheap processing techniques has made polymer-based materials present in almost every aspect of modern society.3 Organic semiconductors have several advantages: (a) lowcost synthesis, and (b) easy manufacture of thin film devices by vacuum evaporation/sublimation or solution cast or printing technologies. Furthermore, organic semiconductor thin films may show high absorption coefficients4 exceeding 105 cm-1, which makes them good chromophores for optoelectronic applications. The electronic band gap of organic semiconductors can be engineered by chemical synthesis for simple color changing of light emitting diodes (LEDs).5 Charge carrier mobilities as high as 10 cm2/V‚s6 made them competitive with amorphous silicon.7 This review is organized as follows. In the first part, we will give a general introduction to the materials, production techniques, working principles, critical parameters, and stability of the organic solar cells. In the second part, we will focus on conjugated polymer/fullerene bulk heterojunction solar cells, mainly on polyphenylenevinylene (PPV) derivatives/(1-(3-methoxycarbonyl) propyl-1-phenyl[6,6]C61) (PCBM) fullerene derivatives and poly(3-hexylthiophene) (P3HT)/PCBM systems. In the third part, we will discuss the alternative approaches such as polymer/polymer solar cells and organic/inorganic hybrid solar cells. In the fourth part, we will suggest possible routes for further improvements and finish with some conclusions. The different papers mentioned in the text have been chosen for didactical purposes and cannot reflect the chronology of the research field nor have a claim of completeness. The further interested reader is referred to the vast amount of quality papers published in this field during the past decade.

Conjugated polymer-based organic solar cells

Analyzing industrial figure of merit for single-component organic solar cells

Summary. Recent developments on photovoltaic elements based on solid state composites of conjugated, semiconducting polymers mixed with buckminsterfullerene are reviewed. The photoinduced charge transfer from donor-type semiconducting conjugated polymers onto acceptor-type conjugated polymers or acceptor molecules such as buckminsterfullerene is reversible, ultrafast (within 100 fs) with a quantum efficiency approaching unity, and the charge separated state is metastable (up to ms at 80 K). This phenomenon of photoinduced electron transfer leads to a number of potentially interesting applications which include, among others, sensitization of the photoconductivity, reverse saturable absorption (optical limiting), and photovoltaic phenomena. Recent studies on the realization of photovoltaic elements with 3% power conversion efficiency are reported.

Invited Review Recent Developments in Conjugated Polymer Based Plastic Solar Cells

In single-junction photovoltaic (PV) devices, the maximum achievable power conversion efficiency (PCE) is mainly limited by thermalization and transmission losses, because polychromatic solar irradiation cannot be matched to a single bandgap. Several concepts are being investigated to reduce these losses, such as the classical vertical multijunction cells, 'lateral' tandem cells, and multi-exciton generation in the form of photon up- and down-conversion. While in theory, efficiencies exceeding 90% are possible (Landsberg or thermodynamic limit), there are severe practical limitations in terms of processability, cost, and spectral sensitivity. Here, we present a simulation environment based on Bayesian Optimization that is able to predict and optimize the electrical performance of multi-junction architectures, both vertical and lateral, in combination with multi-exciton materials. With respect to vertical stacks, we show that by optimizing bandgap energies of multi-exciton generation (MEG) layers, double junctions can reach efficiencies beyond those of five-junction tandem devices (57%). Moreover, such combinations of MEG and double junction devices would be highly resilient against spectral changes of the incoming sunlight. We point out three main challenges for PV material science to realize such devices. With respect to lateral architectures, we show that MEG layers might allow reducing nonradiative voltage losses following the Energy Gap Law. Finally, we show that the simulation environment is able to use machine learned quantitative structure-property relationships obtained from high-throughput experiments to virtually optimise the active layer (such as, the film thickness and the donor-acceptor ratio) for a given architecture. The simulation environment thus represents an important building block towards a digital twin of PV materials.

Bypassing the single junction limit with advanced photovoltaic architectures

1. Institute of Microand Nanostructure Research (IMN) & Center for Nanoanalysis and Electron Microscopy (CENEM), University of Erlangen-Nuremberg, Germany 2. Institute of Materials for Electronics and Energy Technology (i-MEET), University of ErlangenNuremberg, Germany 3. Institute for Crystallography and Structural Physics, University of Erlangen-Nuremberg, Germany * Corresponding authors: christina.harreiss@fau.de, erdmann.spiecker@fau.de

/pdf/in-situ-and-ex-situ-energy-filtered-transmission-electron-2gwlwwjih7.pdf

In Situ and Ex Situ Energy-Filtered Transmission Electron Microscopy Studies on the Nanomorpholgy Evolution of Organic Bulk Heterojunction Solar Cells

PROBLEM TO BE SOLVED: To provide a system related to a tandem photoelectric cell.SOLUTION: The system configured as a photovoltaic system includes: a first electrode; a second electrode; a first photoactive layer disposed between the first electrode and the second electrode, and including an organic electron donor material and an organic electron acceptor material; and a second photoactive layer disposed between the first electrode and the second electrode, and including an inorganic semiconductor material.

Christoph J. Brabec

Papers

Analyzing industrial figure of merit for single-component organic solar cells

Invited Review Recent Developments in Conjugated Polymer Based Plastic Solar Cells

Bypassing the single junction limit with advanced photovoltaic architectures

In Situ and Ex Situ Energy-Filtered Transmission Electron Microscopy Studies on the Nanomorpholgy Evolution of Organic Bulk Heterojunction Solar Cells

Tandem photoelectric cell