A new wideband receiver architecture is proposed that employs two separate passive-mixer-based downconversion paths, which enables noise cancelling, but avoids voltage gain at blocker frequencies. This approach significantly relaxes the trade-off between noise, out-of-band linearity and wideband operation. The resulting prototype in 40 nm is functional from 80 MHz to 2.7 GHz and achieves a 2 dB noise figure, which only degrades to 4.1 dB in the presence of a 0 dBm blocker.

A Blocker-Tolerant, Noise-Cancelling Receiver Suitable for Wideband Wireless Applications

Aspects of the subject disclosure may include, for example, receiving, by a feed point of a dielectric antenna, electromagnetic waves from a dielectric core coupled to the feed point without an electrical return path, where at least a portion of the dielectric antenna comprises a conductive surface, directing, by the feed point, the electromagnetic waves to a proximal portion of the dielectric antenna, and radiating, via an aperture of the dielectric antenna, a wireless signal responsive to the electromagnetic waves being received at the aperture. Other embodiments are disclosed.

Method and apparatus for coupling an antenna to a device

A fault-tolerant quantum computer with millions of quantum bits (qubits) requires massive yet very precise control electronics for the manipulation and readout of individual qubits. CMOS operating at cryogenic temperatures down to 4 K (cryo-CMOS) allows for closer system integration, thus promising a scalable solution to enable future quantum computers. In this paper, a cryogenic control system is proposed, along with the required specifications, for the interface of the classical electronics with the quantum processor. To prove the advantages of such a system, the functionality of key circuit blocks is experimentally demonstrated. The characteristic properties of cryo-CMOS are exploited to design a noise-canceling low-noise amplifier for spin-qubit RF-reflectometry readout and a class-F2,3 digitally controlled oscillator required to manipulate the state of qubits.

/pdf/cryo-cmos-circuits-and-systems-for-quantum-computing-5985tefryv.pdf

Cryo-CMOS Circuits and Systems for Quantum Computing Applications

A distributed antenna system is provided that frequency shifts the output of one or more microcells to a 60 GHz or higher frequency range for transmission to a set of distributed antennas. The cellular band outputs of these microcell base station devices are used to modulate a 60 GHz (or higher) carrier wave, yielding a group of subcarriers on the 60 GHz carrier wave. This group will then be transmitted in the air via analog microwave RF unit, after which it can be repeated or radiated to the surrounding area. The repeaters amplify the signal and resend it on the air again toward the next repeater. In places where a microcell is required, the 60 GHz signal is shifted in frequency back to its original frequency (e.g., the 1.9 GHz cellular band) and radiated locally to nearby mobile devices.

Remote distributed antenna system

Aspects of the subject disclosure may include, for example, a system for detecting a fault in a first wire of a power grid that affects a transmission or reception of electromagnetic waves that transport data and that propagate along a surface of the first wire, selecting a backup communication medium from one or more backup communication mediums according to one or more selection criteria, and redirecting the data to the backup communication medium to circumvent the fault. Other embodiments are disclosed.

Method and apparatus that provides fault tolerance in a communication network

-phase bandpass filters (BPFs) are analyzed, and variations of the structure are proposed. For values of that are integer multiples of 4, the conventional -phase BPF structure is modified to take complex baseband impedances and frequency-translate their complex impedance response to the local oscillator frequency. Also, it is demonstrated how the -phase BPF can be modified to implement a high quality factor (Q) image-rejection BPF with quadrature RF inputs. In addition, we present high-Q BPFs whose center frequencies are equal to the sum or difference of the RF and IF (intermediate frequency) clocks. Such filters can be useful in heterodyne receiver architectures.

Architectural Evolution of Integrated M-Phase High-Q Bandpass Filters

Recent work by Bank, and Mazzanti and Andreani has offered a general result concerning phase noise in nearly-sinusoidal inductance-capacitance (LC) oscillators; namely that the noise factor of such oscillators (under certain achievable conditions) is largely independent of the specific operation of individual transistors in the active circuitry. Both use the impulse sensitivity function (ISF). In this work, we show how the same result can be obtained by generalizing the phasor-based analysis. Indeed, as applied to nearly-sinusoidal LC oscillators, we show how the two approaches are equivalent. We analyze the negative-gm LC model and present a simple equation that quantifies output noise resulting from phase fluctuations. We also derive an expression for output noise resulting from amplitude fluctuations. Further, we extend the analysis to consider the voltage-biased LC oscillator and fully differential CMOS LC oscillator, for which the Bank's general result does not apply. Thus we quantify the concept of loaded Q.

Phase Noise in LC Oscillators: A Phasor-Based Analysis of a General Result and of Loaded $Q$

As narrowband off-chip RF filtering is not compatible with the concept of software-defined radio (SDR), an SDR receiver must be designed to tolerate large out-of-band blockers with minimal gain compression and noise figure degradation. A recent circuit [1] tackles this problem by dispensing with the LNA entirely. This mixer-first approach achieves impressive linearity, but at the expense of noise figure and, since such a receiver has no gain prior to down-conversion, the flicker noise corner can be unacceptably high. Other SDR attempts invariably use a noise-cancelling LNA at the front end, which provides wideband matching, however such approaches have either inadequate linearity [2] or display too large a noise for our purposes [3]. In this work, we propose a hybrid frequency-translational, noise-cancelling(FTNC) receiver that employs two separate down-conversion paths to enable noise cancelling with no voltage gain prior to base-band filtering. The resulting design has a sub-2dB noise figure and tolerates 0dBm blockers with no gain back-off, breaking the traditional noise-linearity trade-off common in all receivers.

A blocker-tolerant wideband noise-cancelling receiver with a 2dB noise figure

The performance of a differential LC oscillator can be enhanced by resonating the common mode of the circuit at twice the oscillation frequency. When this technique is correctly employed, Q-degradation due to the triode operation of the differential pair is eliminated and flicker noise is nulled. Until recently, one or more tail inductors have been used to achieve this common-mode resonance. In this paper, we demonstrate that additional inductors are not strictly necessary by showing that common-mode resonance can be obtained using a single tank. We present an NMOS architecture that uses a single differential inductor and a CMOS design that uses a single transformer. Prototypes are presented that achieve figure-of-merits of 192 and 195 dBc/Hz, respectively.

David Murphy

Papers

A Blocker-Tolerant, Noise-Cancelling Receiver Suitable for Wideband Wireless Applications

Architectural Evolution of Integrated M-Phase High-Q Bandpass Filters

Phase Noise in LC Oscillators: A Phasor-Based Analysis of a General Result and of Loaded $Q$

A blocker-tolerant wideband noise-cancelling receiver with a 2dB noise figure

Implicit Common-Mode Resonance in LC Oscillators