Twenty years ago in a series of amazing discoveries it was found that a large family of ceramic cuprate materials exhibited superconductivity at temperatures above, and in some cases well above, that of liquid nitrogen. Imaginations were energized by the thought of applications for zero-resistance conductors cooled with an inexpensive and readily available cryogen. Early optimism, however, was soon tempered by the hard realities of these new materials: brittle ceramics are not easily formed into long flexible conductors; high current levels require near-perfect crystallinity; and — the downside of high transition temperature — performance drops rapidly in a magnetic field. Despite these formidable obstacles, thousands of kilometres of high-temperature superconducting wire have now been manufactured for demonstrations of transmission cables, motors and other electrical power components. The question is whether the advantages of superconducting wire, such as efficiency and compactness, can outweigh the disadvantage: cost. The remaining task for materials scientists is to return to the fundamentals and squeeze as much performance as possible from these wonderful and difficult materials.

Materials science challenges for high-temperature superconducting wire

In-plane—aligned, c axis—oriented YBa2Cu3O7 (YBCO) films with superconducting critical current densities Jc as high as 700,000 amperes per square centimeter at 77 kelvin have been grown on thermomechanically rolled-textured nickel (001) tapes by pulsed-laser deposition. Epitaxial growth of oxide buffer layers directly on biaxially textured nickel, formed by recrystallization of cold-rolled pure nickel, made possible the growth of YBCO films 1.5 micrometers thick with superconducting properties that are comparable to those observed for epitaxial films on single-crystal oxide substrates. This result represents a viable approach for the production of long superconducting tapes for high-current, high-field applications at 77 kelvin.

https://science.sciencemag.org/content/sci/274/5288/755.full.pdf

Epitaxial YBa2Cu3O7 on Biaxially Textured Nickel (001): An Approach to Superconducting Tapes with High Critical Current Density

The development of biaxially textured, second-generation, high-temperature superconducting (HTS) wires is expected to enable most large-scale applications of HTS materials, in particular electric-power applications. For many potential applications, high critical currents in applied magnetic fields are required. It is well known that columnar defects generated by irradiating high-temperature superconducting materials with heavy ions significantly enhance the in-field critical current density. Hence, for over a decade scientists world-wide have sought means to produce such columnar defects in HTS materials without the expense and complexity of ionizing radiation. Using a simple and practically scalable technique, we have succeeded in producing long, nearly continuous vortex pins along the c-axis in YBa2Cu3O7?? (YBCO), in the form of self-assembled stacks of BaZrO3 (BZO) nanodots and nanorods. The nanodots and nanorods have a diameter of ~2?3?nm and an areal density ('matching field') of 8?10?T for 2?vol.% incorporation of BaZrO3. In addition, four misfit dislocations around each nanodot or nanorod are aligned and act as extended columnar defects. YBCO films with such defects exhibit significantly enhanced pinning with less sensitivity to magnetic fields H. In particular, at intermediate field values, the current density, Jc, varies as Jc~H??, with ?~0.3 rather than the usual values 0.5?0.65. Similar results were also obtained for CaZrO3 (CZO) and YSZ incorporation in the form of nanodots and nanorods within YBCO, indicating the broad applicability of the developed process. The process could also be used to incorporate self-assembled nanodots and nanorods within matrices of other materials for different applications, such as magnetic materials.

https://iopscience.iop.org/article/10.1088/0953-2048/18/11/021/pdf

Irradiation-free, columnar defects comprised of self-assembled nanodots and nanorods resulting in strongly enhanced flux-pinning in YBa2Cu3O7−δ films

The broad spectrum of electronic and optical properties exhibited by oxides offers tremendous opportunities for microelectronic devices, especially when a combination of properties in a single device is desired Here we describe the use of reactive molecular-beam epitaxy and pulsed-laser deposition to synthesize functional oxides, including ferroelectrics, ferromagnets, and materials that are both at the same time Owing to the dependence of properties on direction, it is often optimal to grow functional oxides in particular directions to maximize their properties for a specific application But these thin film techniques offer more than orientation control; customization of the film structure down to the atomic-layer level is possible Numerous examples of the controlled epitaxial growth of oxides with perovskite and perovskite-related structures, including superlattices and metastable phases, are shown In addition to integrating functional oxides with conventional semiconductors, standard semiconductor practices involving epitaxial strain, confined thickness, and modulation doping can also be applied to oxide thin films Results of fundamental scientific importance as well as results revealing the tremendous potential of utilizing functional oxide thin films to create devices with enhanced performance are described

/pdf/a-thin-film-approach-to-engineering-functionality-into-51t9902h5j.pdf

A Thin Film Approach to Engineering Functionality into Oxides

In the past few years magneto-optical flux imaging (MOI) has come to take an increasing role in the investigation and understanding of critical current densities in high-Tc superconductors (HTS). This has been related to the significant progress in quantitative high-resolution magneto-optical imaging of flux distributions together with the model-independent determination of the corresponding current distributions. We review in this article the magneto-optical imaging technique and experiments on thin films, single crystals, polycrystalline bulk ceramics, tapes and melt-textured HTS materials and analyse systematically the properties determining the spatial distribution and the magnitude of the supercurrents. First of all, the current distribution is determined by the sample geometry. Due to the boundary conditions at the sample borders, the current distribution in samples of arbitrary shape splits up into domains of nearly uniform parallel current flow which are separated by current domain boundaries, where the current streamlines are sharply bent. Qualitatively, the current pattern is described by the Bean model; however, changes due to a spatially dependent electric field distribution which is induced by flux creep or flux flow have to be taken into account. For small magnetic fields, the Meissner phase coexists with pinned vortex phases and the geometry-dependent Meissner screening currents contribute to the observed current patterns. The influence of additional factors on the current domain patterns are systematically analysed: local magnetic field dependence of jc(B), current anisotropy, inhomogeneities and local transport properties of grain boundaries. We then continue to an overview of the current distribution and current-limiting factors of materials, relevant to technical applications like melt-textured samples, coated conductors and tapes. Finally, a selection of magneto-optical experiments which give direct insight into vortex pinning and depinning mechanisms are reviewed.

https://iopscience.iop.org/article/10.1088/0034-4885/65/5/202/pdf

Magneto-optical studies of current distributions in high-Tc superconductors

A method to obtain long lengths of flexible, biaxially oriented substrates with smooth, chemically compatible surfaces for epitaxial growth of high‐temperature superconductors is reported. The technique uses well established, industrially scalable, thermomechanical processes to impart a strong biaxial texture to a base metal. This is followed by vapor deposition of epitaxial buffer layers (metal and/or ceramic) to yield chemically compatible surfaces. Epitaxial YBa2Cu3Ox films grown on such substrates have critical current densities exceeding 105 A/cm2 at 77 K in zero field and have field dependencies similar to epitaxial films on single crystal ceramic substrates. Deposited conductors made using this technique offer a potential route for the fabrication of long lengths of high‐Jc wire capable of carrying high currents in high magnetic fields and at elevated temperatures.

E. Hartfield

Papers

High critical current density superconducting tapes by epitaxial deposition of YBa2Cu3Ox thick films on biaxially textured metals

High critical current density superconducting tapes by epitaxial deposition of YBa2Cu3Ox thick films on biaxially textured metals