Nanostructures have attracted huge interest as a rapidly growing class of materials for many applications. Several techniques have been used to characterize the size, crystal structure, elemental composition and a variety of other physical properties of nanoparticles. In several cases, there are physical properties that can be evaluated by more than one technique. Different strengths and limitations of each technique complicate the choice of the most suitable method, while often a combinatorial characterization approach is needed. In addition, given that the significance of nanoparticles in basic research and applications is constantly increasing, it is necessary that researchers from separate fields overcome the challenges in the reproducible and reliable characterization of nanomaterials, after their synthesis and further process (e.g. annealing) stages. The principal objective of this review is to summarize the present knowledge on the use, advances, advantages and weaknesses of a large number of experimental techniques that are available for the characterization of nanoparticles. Different characterization techniques are classified according to the concept/group of the technique used, the information they can provide, or the materials that they are destined for. We describe the main characteristics of the techniques and their operation principles and we give various examples of their use, presenting them in a comparative mode, when possible, in relation to the property studied in each case.

/pdf/characterization-techniques-for-nanoparticles-comparison-and-2ubze3ehrc.pdf

Characterization techniques for nanoparticles: comparison and complementarity upon studying nanoparticle properties

Currently there are few ideal methods for the characterization of nanoparticles in complex, environmental samples, leading to significant gaps in toxicity and exposure assessments of nanomaterials. Single particle-inductively coupled plasma-mass spectrometry (spICPMS) is an emerging technique that can both size and count metal-containing nanoparticles. A major benefit of the spICPMS method is its ability to characterize nanoparticles at concentrations relevant to the environment. This paper presents a practical guide on how to count and size nanoparticles using spICPMS. Different methods are investigated for measuring transport efficiency (i.e., nebulization efficiency), an important term in the spICPMS calculations. In addition, an alternative protocol is provided for determining particle size that broadens the applicability of the technique to all types of inorganic nanoparticles. Initial comparison, using well-characterized, monodisperse silver nanoparticles, showed the importance of having an accurate...

/pdf/determining-transport-efficiency-for-the-purpose-of-counting-4dlp6nptwe.pdf

Determining Transport Efficiency for the Purpose of Counting and Sizing Nanoparticles via Single Particle Inductively Coupled Plasma Mass Spectrometry

Approximately a third of the human proteome contains metal cations, either in form of cofactors with catalytic functions, or as structural support elements.1,2 To guarantee a proper maintenance of this metal ion pool, both at the cellular and whole organism levels, nature has evolved a highly sophisticated machinery comprised of a complex interplay between DNA, proteins, and biomolecules.3 Over the past decades, a steadily growing number of diseases have been identified, which are characterized by metal imbalance in cells and tissues. Among the most prominent examples rank Alzheimer’s disease and Parkinson’s disease, two neurodegenerative disorders that involve abnormal accumulation of transition metals in brain tissue.4 While some progress has been made at understanding the molecular basis of these disorders, many important questions remain unanswered. For example, little is known about the cellular structures that are involved in transiently storing metal ions prior to their incorporation into metalloproteins or the fate of metal ions upon protein degradation. An important first step towards unraveling the regulatory mechanisms involved in trace metal transport, storage, and distribution represents the identification and quantification of the metals, ideally in context of their native physiological environment in tissues, cells, or even at the level of individual organelles and subcellular compartments.

Since the inception of the first histochemical methods for the microscopic demonstration of transition metals in tissues more than 140 years ago,5 many highly sensitive microanalytical techniques and instruments have been developed for the in situ analysis of trace metals. The aim of this review is to provide an overview of the most recent achievements in trace metal imaging while at the same time also offering a historical perspective of this rapidly evolving research field. Although this survey has been structured according to the various analytical techniques, particular emphasis is given to the biological background for a better understanding of the context and importance of each discussed study.

An overview of the most important microanalytical techniques currently available for the in situ detection of trace metals in cells and tissues is compiled in Table 1. Depending on the task, each technique may offer specific advantages and, of course, also disadvantages. Currently, synchrotron- and focused ion-beam microprobes presumably offer the best combination of sensitivity and spatial resolution; however, the ionizing high-energy excitation beam is not compatible with studying live organisms. Conversely, techniques that have been specifically developed for physiological imaging in clinical medicine, notably magnetic resonance imaging and positron emission tomography, inherently offer only a low spatial resolution and are merely suitable for obtaining information at the organ or tissue level. Although fluorescence microscopy based methods provide very high sensitivity down to the single molecule level while being at the same time compatible with live cell and tissue studies, scattering and limited penetration depth renders these techniques unsuitable for imaging opaque specimens. There are also important differences regarding the type of quantitative information that can be gained by each of these analytical techniques. For example, the histochemical detection with chromogenic and fluorogenic dyes relies on a competitive exchange of the metal ion within its native environment, most likely coordinated to endogenous ligands. Depending on the exchange kinetics and thermodynamic affinity of the histochemical indicator, only a fraction of the total metal ion contents in a cell or tissue can be probed. Nevertheless, this kinetically labile pool is particularly of interest in context of understanding the uptake, distribution, and regulation of trace elements at the cellular level, and in this regard, these methods offer unique opportunities to dynamically image metal ion fluxes in live cells with high sensitivity and spatial resolution. At the same time, organelles and proteins of interest can be readily labeled with genetically encoded green fluorescent protein tags,12 thus providing direct insights into dynamic processes within a larger cellular and biochemical context. In contrast, similar correlative information is difficult to gain with the fully quantitative micro beam methods, which require xenobiotic elemental tags for identifying subcellular structures. Autoradiographic tracer experiments offer much improved resolution over PET; however, the technique is only applicable to fixed or frozen tissues and cells. Furthermore, tracer studies cannot provide direct information regarding the endogenous metal composition of cells or tissues, and are therefore primarily limited to metal uptake, distribution, and release studies. Finally, mass spectrometric analyses are surface-based methods that destroy the sample while measuring its elemental composition. Clearly, only the combination of several analytical techniques and specific biochemical studies may lead to a fully comprehensive analysis of a biological system.



Table 1

Spatially resolved microanalytical techniques for in situ imaging of trace metals in biology.6–11




2. Histochemical Techniques
Histology is the branch of biology dealing with the study of microscopic anatomy of cells and tissues of plants and animals. Histological studies are typically carried out on thin sections of tissue or with cultured cells. To visualize and identify particular structures, a broad spectrum of histological stains and indicators are available. Among the most widely used dyes are hematoxylin and eosin, which stain nuclei blue and the cytoplasm pink, respectively.13 The history of detecting biological trace metal by histological methods dates back more than 140 years. Although these techniques have been today mostly replaced by the much more sensitive modern analytical methods described in this review article, histochemical approaches for visualizing metals mark the very beginning in the exploration of the inorganic physiology of transition metals. Given this special place in history, we deemed it necessary to briefly review some of the early achievements in this field.

2.1. Chromogenic Detection with Chelators and Ligands
Ever since the inception of Perls Prussian blue method for staining of non-heme iron, numerous indicators have been developed for the in situ visualization of trace metals in biological tissues and cells.13 Due to their limited sensitivity; however, most of these techniques were only suitable for the diagnosis of pathological conditions, typically associated with excess metal accumulations, thus preventing their application for routine staining of normal tissue. Furthermore, because the dyes are engaged in a competitive exchange equilibrium with endogenous ligands, histological stains are not suitable for the analytical determination of the total metal contents in tissues and thus limited to the visualization of the histologically reactive fraction of loosely bound labile metal ions.



2.1.1. Histochemistry of Iron 
The histochemical demonstration of labile iron reported by Perls in 1867 is among the earliest accounts describing the in situ visualization of a trace metal in biological tissues.5 The method was originally described by Grohe, who observed the formation of a blue coloration when he treated cadaver tissues with potassium ferrocyanide in acidic solution.14 Due to its low cost and simplicity, the technique is still used today for the histological visualization of non-heme iron. Some variations focused on optimizing the concentrations and proportions of the reagents,15–17 among which Lison’s protocol17 appears to be most popular today. An intensification of Perls’ staining can be obtained by exploiting the use of ferric ferrocyanide in catalyzing the oxidation of diaminobenzidine (DAB) to polymeric benzidine black by hydrogen peroxide.18

An alternative method employs the reaction of ferricyanide with Fe(II) resulting in Turnbull blue.19 Since almost all of the Fe in tissues is in the ferric form, the staining procedure requires the in situ conversion of Fe(III) to Fe(II) with ammonium sulfide.15 Due to often incomplete reduction, the method never gained much attention. More recently, an application of Turnbull blue, named the ‘perfusion Turnbull method’ has been developed, where in vivo perfusion of acidic ferricyanide is followed by DAB intensification.20 The direct in vivo perfusion avoids artifacts associated with tissue fixation, including the loss of loosely bound iron and oxidation of Fe(II) to Fe(III). Similarly, Perls method was modified by employing in vivo perfusion with acidic ferrocyanide. Both methods are capable of identifying organs and tissues containing histochemically reactive iron over a broad pH range, including the low endosomal pH.21,22

The history of iron histochemistry would be incomplete without mentioning Quincke’s method, which employed ammonium sulfide for the precipitation of tissue iron as its sulfide.23 A detailed account on the various techniques, including a comprehensive historical overview of non-heme iron chemistry, has been recently published.24

In Situ Imaging of Metals in Cells and Tissues

Important challenges in the global water situation, mainly resulting from worldwide population growth and climate change, require novel innovative water technologies in order to ensure a supply of drinking water and reduce global water pollution. Against this background, the adaptation of highly advanced nanotechnology to traditional process engineering offers new opportunities in technological developments for advanced water and wastewater technology processes. Here, an overview of recent advances in nanotechnologies for water and wastewater treatment processes is provided, including nanobased materials, such as nanoadsorbents, nanometals, nanomembranes, and photocatalysts. The beneficial properties of these materials as well as technical barriers when compared with conventional processes are reported. The state of commercialization is presented and an outlook on further research opportunities is given for each type of nanobased material and process. In addition to the promising technological enhancements, the limitations of nanotechnology for water applications, such as laws and regulations as well as potential health risks, are summarized. The legal framework according to nanoengineered materials and processes that are used for water and wastewater treatment is considered for European countries and for the USA.

/pdf/innovations-in-nanotechnology-for-water-treatment-58dt97dxod.pdf

Innovations in nanotechnology for water treatment.

The present review covers developments in studies of nanomaterials (NMs) in the environment since our much cited review in 2008. We discuss novel insights into fate and behavior, metrology, transformations, bioavailability, toxicity mechanisms, and environmental impacts, with a focus on terrestrial and aquatic systems. Overall, the findings were that: 1) despite substantial developments, critical gaps remain, in large part due to the lack of analytical, modeling, and field capabilities, and also due to the breadth and complexity of the area; 2) a key knowledge gap is the lack of data on environmental concentrations and dosimetry generally; 3) substantial evidence shows that there are nanospecific effects (different from the effects of both ions and larger particles) on the environment in terms of fate, bioavailability, and toxicity, but this is not consistent for all NMs, species, and relevant processes; 4) a paradigm is emerging that NMs are less toxic than equivalent dissolved materials but more toxic than the corresponding bulk materials; and 5) translation of incompletely understood science into regulation and policy continues to be challenging. There is a developing consensus that NMs may pose a relatively low environmental risk, but because of uncertainty and lack of data in many areas, definitive conclusions cannot be drawn. In addition, this emerging consensus will likely change rapidly with qualitative changes in the technology and increased future discharges. Environ Toxicol Chem 2018;37:2029-2063. © 2018 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals, Inc. on behalf of SETAC.

/pdf/nanomaterials-in-the-environment-behavior-fate-1cyiwpi1vp.pdf

Nanomaterials in the environment: behavior, fate, bioavailability, and effects—an updated review

Sizing engineered nanoparticles in simple, laboratory systems is now a robust field of science; however, application of available techniques to more complex, natural systems is hindered by numerous challenges including low nanoparticle number concentrations, polydispersity from aggregation and/or dissolution, and interference from other incidental particulates. A new emerging technique, single particle inductively coupled plasma-mass spectrometry (spICPMS), has the potential to address many of these analytical challenges when sizing inorganic nanoparticles in environmental matrices. However, to date, there is little beyond the initial feasibility studies that investigates the performance characteristics and validation of spICPMS as a nanoparticle sizing technique. This study compares sizing of four silver nanoparticle dispersions (nominal diameters of 40, 60, 80, and 100 nm) by spICPMS to four established sizing techniques: dynamic light scattering, differential centrifugal sedimentation, nanoparticle tra...

Single particle inductively coupled plasma-mass spectrometry: a performance evaluation and method comparison in the determination of nanoparticle size.

The acute toxicity of polymer-coated CdSe/ZnS quantum dots (QDs) to Daphnia magna was investigated using 48-h exposure studies. The principal objective was to relate the toxicity of QDs to specific physical and chemical aspects of the QD. As such, two different CdSe core diameters, 2 nm QDs (green-emitting) and 5 nm QDs (red-emitting), and two different surface coatings, polyethylene oxide (PEO) and 11-mercaptoundecanoic acid (MUA) were studied. The QDs were characterized before and after the 48-h exposure using fluorescence, ultrafiltrations (3 kDa), and inductively coupled plasma-atomic emission spectrometry (ICP-AES) metal analysis. In addition, flow field flow fractionation-inductively coupled plasma-mass spectrometry (Fl FFF-ICP-MS) was used as a more extensive characterization technique to determine particle size and composition as well as identify other potential constituents in the QD solutions. The more stable QDs (PEO) were found to be less acutely toxic than the QDs with accelerated dissolution (MUA), suggesting QD stability has significant impact on the nanoparticles' short-term toxicity. The emergence of dissolved Cd(2+) in solution indicates that the toxicity of the MUA QDs is likely due to Cd poisoning, and a mass-based dose response occurred as a consequence of this mode of action. Alternatively, the PEO QDs caused acute toxicity without observed particle dissolution (i.e., no detectable metals were solubilized), suggesting an alternative mode of toxic action for these nanoparticles. Results of the present study suggest that using particle number, instead of mass, as a dose metric for the PEO QDs, produces markedly different conclusions, in that smaller core size does not equate to greater toxicity.

https://setac.onlinelibrary.wiley.com/doi/pdf/10.1002/etc.168

Influence of stability on the acute toxicity of CdSe/ZnS nanocrystals to Daphnia magna

The potential toxicity of nanoparticles to aquatic organisms is of interest given that increased commercialization will inevitably lead to some instances of inadvertent environmental exposures. Cadmium selenide quantum dots (QDs) capped with zinc sulfide are used in the semiconductor industry and in cellular imaging. Their small size (<10 nm) suggests that they may be readily assimilated by exposed organisms. We exposed Daphnia magna to both red and green QDs and used synchrotron X-ray fluorescence to study the distribution of Zn and Se in the organism over a time period of 36 h. The QDs appeared to be confined to the gut, and there was no evidence of further assimilation into the organism. Zinc and Se fluorescence signals were highly correlated, suggesting that the QDs had not dissolved to any extent. There was no apparent difference between red or green QDs, i.e., there was no effect of QD size. 3D tomography confirmed that the QDs were exclusively in the gut area of the organism. It is possible that the QDs aggregated and were therefore too large to cross the gut wall.

Heather E. Pace

Papers

Determining Transport Efficiency for the Purpose of Counting and Sizing Nanoparticles via Single Particle Inductively Coupled Plasma Mass Spectrometry

Single particle inductively coupled plasma-mass spectrometry: a performance evaluation and method comparison in the determination of nanoparticle size.

Influence of stability on the acute toxicity of CdSe/ZnS nanocrystals to Daphnia magna

Synchrotron X-ray 2D and 3D elemental imaging of CdSe/ZnS quantum dot nanoparticles in Daphnia magna.