Organ printing can be defined as layer-by-layer additive robotic biofabrication of three-dimensional functional living macrotissues and organ constructs using tissue spheroids as building blocks. The microtissues and tissue spheroids are living materials with certain measurable, evolving and potentially controllable composition, material and biological properties. Closely placed tissue spheroids undergo tissue fusion - a process that represents a fundamental biological and biophysical principle of developmental biology-inspired directed tissue self-assembly. It is possible to engineer small segments of an intraorgan branched vascular tree by using solid and lumenized vascular tissue spheroids. Organ printing could dramatically enhance and transform the field of tissue engineering by enabling large-scale industrial robotic biofabrication of living human organ constructs with "built-in" perfusable intraorgan branched vascular tree. Thus, organ printing is a new emerging enabling technology paradigm which represents a developmental biology-inspired alternative to classic biodegradable solid scaffold-based approaches in tissue engineering.

Organ Printing: Tissue Spheroids as Building Blocks

Selective catalytic reduction with NH3 (NH3-SCR) is the most efficient technology to reduce the emission of nitrogen oxides (NOx) from coal-fired industries, diesel engines, etc. Although V2O5-WO3(MoO3)/TiO2 and CHA structured zeolite catalysts have been utilized in commercial applications, the increasing requirements for broad working temperature window, strong SO2/alkali/heavy metal-resistance, and high hydrothermal stability have stimulated the development of new-type NH3-SCR catalysts. This review summarizes the latest SCR reaction mechanisms and emerging poison-resistant mechanisms in the beginning and subsequently gives a comprehensive overview of newly developed SCR catalysts, including metal oxide catalysts ranging from VOx, MnOx, CeO2, and Fe2O3 to CuO based catalysts; acidic compound catalysts containing vanadate, phosphate and sulfate catalysts; ion exchanged zeolite catalysts such as Fe, Cu, Mn, etc. exchanged zeolite catalysts; monolith catalysts including extruded, washcoated, and metal-mesh/foam-based monolith catalysts. The challenges and opportunities for each type of catalysts are proposed while the effective strategies are summarized for enhancing the acidity/redox circle and poison-resistance through modification, creating novel nanostructures, exposing specific crystalline planes, constructing protective/sacrificial sites, etc. Some suggestions are given about future research directions that efforts should be made in. Hopefully, this review can bridge the gap between newly developed catalysts and practical requirements to realize their commercial applications in the near future.

Selective Catalytic Reduction of NOx with NH3 by Using Novel Catalysts: State of the Art and Future Prospects.

It is of great importance to develop multifunctional bioactive scaffolds, which combine angiogenesis capacity, osteostimulation, and antibacterial properties for regenerating lost bone tissues. In order to achieve this aim, we prepared copper (Cu)-containing mesoporous bioactive glass (Cu-MBG) scaffolds with interconnective large pores (several hundred micrometer) and well-ordered mesopore channels (around 5 nm). Both Cu-MBG scaffolds and their ionic extracts could stimulate hypoxia-inducible factor (HIF)-1a and vascular endothelial growth factor(VEGF) expression in human bone marrow stromal cells(hBMSCs). In addition, both Cu-MBG scaffolds and their ionic extracts significantly promoted the osteogenic differentiation of hBMSCs by improving their bone-related gene expression (alkaline phosphatase (ALP), osteopontin(OPN) and osteocalcin (OCN)). Furthermore, Cu-MBG scaffolds could maintain a sustained release of ibuprofen and significantly inhibited the viability of bacteria. This study indicates that the incorporation of Cu2þ ions into MBG scaffolds significantly enhances hypoxia-like tissue reaction leading to the coupling of angiogenesis and osteogenesis. Cu2þ ions play an important role to offer the multifunctional properties of MBG scaffold system. This study has demonstrated that it is possible to develop multifunctional scaffolds by combining enhanced angiogenesis potential, osteostimulation, and antibacterial properties for the treatment of large bone defects.

Copper-containing mesoporous bioactive glass scaffolds with multifunctional properties of angiogenesis capacity, osteostimulation and antibacterial activity

Herein, we have rationally designed and originally developed a high-performance deNOx catalyst based on hollow porous MnxCo3–xO4 nanocages with a spinel structure thermally derived from nanocube-like metal–organic frameworks (Mn3[Co(CN)6]2·nH2O), which are synthesized via a self-assemble method. The as-prepared catalysts have been characterized systematically to elucidate their morphological structure and surface properties. As compared with conventional MnxCo3–xO4 nanoparticles, MnxCo3–xO4 nanocages possess a much better catalytic activity at low-temperature regions, higher N2 selectivity, more extensive operating-temperature window, higher stability, and SO2 tolerance. The feature of hollow and porous structures provides a larger surface area and more active sites to adsorb and activate reaction gases, resulting in the high catalytic activity. Moreover, the uniform distribution and strong interaction of manganese and cobalt oxide species not only enhance the catalytic cycle but also inhibit the formatio...

Rational Design of High-Performance DeNOx Catalysts Based on MnxCo3–xO4 Nanocages Derived from Metal–Organic Frameworks

Sm-Mn mixed oxide catalysts prepared by the coprecipitation method were developed, and their catalytic activities were tested for the selective catalytic reduction (SCR) of NO with ammonia at low temperature. The results showed that the amount of Sm markedly influenced the activity of the MnOx catalyst for SCR, that the activity of the Sm-Mn mixed oxide catalyst exhibited a volcano-type tendency with an increase in the Sm content, and that the appropriate mole ratio of Sm to Mn in the catalyst was 0.1. In addition, the presence of Sm in the MnOx catalyst can obviously enhance both water and sulfur dioxide resistances. The effect of Sm on the physiochemical properties of the Sm-MnOx catalyst were investigated by XRD, low-temperature N2 adsorption, XPS, and FE-SEM techniques. The results showed that the presence of Sm in the Sm-MnOx catalyst can restrain the crystallization of MnOx and increase its surface area and the relative content of both Mn4+ and surface oxygen (OS) on the surface of the Sm-MnOx catal...

A Highly Effective Catalyst of Sm-MnOx for the NH3-SCR of NOx at Low Temperature: Promotional Role of Sm and Its Catalytic Performance

A series of MoO3-doped CeO2/TiO2 catalysts prepared by the impregnation method were investigated for the selective catalytic reduction of NO,c by NH3(NH3-SCR). It was found that CeO2-MoO3/TiO2 catalyst is much more active than CeO2/TiO2 for NH3-SCR and the optimum MoO3 loading is 5%. The mechanistic cause of the promoting effect of MoO3 on the activity of CeO2/TiO2 catalyst for NH3-SCR was studied using in situ diffuse reflectance infrared transform spectroscopy (DRIFTS). The results revealed that the highly dispersed molybdenum on CeO2-MoO3/TiO2 catalyst not only resulted in more Brensted acid sites formed on the catalyst surface, but also reduced the thermal stability of the inactive nitrate specie, leaving more active sites available for the adsorption of NH3, both of which are favorable for the promotion of SCR activity. (C) 2013 Elsevier B.V. All rights reserved.

Promoting effect of MoO3 on the NOx reduction by NH3 over CeO2/TiO2 catalyst studied with in situ DRIFTS

Mn-Ce-Ti mixed-oxide catalyst prepared by the hydrothermal method was investigated for the selective catalytic reduction (SCR) of NOx with NH3 in the presence of oxygen. It was found that the environmentally benign Mn-Ce-Ti catalyst exhibited excellent NH3-SCR activity and strong resistance against H2O and SO2 with a broad operation temperature window, which is very competitive for the practical application in controlling the NOx emission from diesel engines. On the basis of the catalyst characterization, the dual redox cycles (Mn4+ + Ce3+ Mn3+ + Ce4+, Mn4+ + Ti3+ Mn3+ + Ti4+) and the amorphous structure play key roles for the high catalytic deNO(x) performance. Diffuse reflectance infrared Fourier transform spectroscopy studies showed that the synergetic effect between Mn and Ce contributes to the formation of reactive intermediate species, thus promoting the NH3-SCR to proceed.

Novel Mn–Ce–Ti Mixed-Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3

The effect of Ce on the activity and alkali resistance of V2O5/TiO2 catalyst for the selective catalytic reduction (SCR) of NOx by NH3 has been investigated It was found that the addition of Ce not only reduced the vanadium loading of V2O5/TiO2 but also enhanced its activity and alkali resistance The NOx conversion over 05%V2O5-5%CeO2/TiO2 was much higher than that over 1%V2O5/TiO2 catalyst Based on the catalyst characterization, the redox cycle (V4+ + Ce4+ V5+ + Ce3+) can account for the excellent NH3-SCR catalytic performance of 05%V2O5-5%CeO2/TiO2 catalyst In situ diffuse reflectance infrared transform spectroscopy (DRIFTS) measurements revealed that the role of Ce on the V2O5-CeO2/TiO2 catalyst was to contribute to the formation of NO2 and monodentate nitrate species, both of which were reactive intermediates for the NH3-SCR of NOx (C) 2014 Elsevier BV All rights reserved

Novel V2O5–CeO2/TiO2 catalyst with low vanadium loading for the selective catalytic reduction of NOx by NH3

A novel "hot spring"-mimetic hydrogel with excellent angiogenic properties for chronic wound healing.

Photothermal therapy (PTT), an emerging tumor treatment technology, has attracted tremendous interest, but excessive heat will cause damage to surrounding healthy tissues. Therefore, in situ temperature monitoring during PTT is of great importance to determine optimal treatment temperature and repair heat-damaged normal tissues. Here, we report the preparation of multifunctional Nd-Ca-Si silicate glasses and glass/alginate composite hydrogels that not only have photothermal property but also emit fluorescence under 808-nm laser irradiation, and its fluorescence intensity is linearly correlated with in situ temperature. With this feature, optimal PTT temperature for effective tumor treatment with minimal normal tissue damage can be obtained. In addition, because of the bioactive silicate components, the composite hydrogel has bioactivity to repair heat damage caused by PTT. This implantable multifunctional material with unique temperature monitoring, photothermal function, and wound healing bioactivity can be used for localized thermal therapy.

Lingling Ma

Papers

Promoting effect of MoO3 on the NOx reduction by NH3 over CeO2/TiO2 catalyst studied with in situ DRIFTS

Novel Mn–Ce–Ti Mixed-Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3

Novel V2O5–CeO2/TiO2 catalyst with low vanadium loading for the selective catalytic reduction of NOx by NH3

A novel "hot spring"-mimetic hydrogel with excellent angiogenic properties for chronic wound healing.

Multifunctional bioactive Nd-Ca-Si glasses for fluorescence thermometry, photothermal therapy, and burn tissue repair