In this article, several applications of nanomaterials in food packaging and food safety are reviewed, including: polymer/clay nanocomposites as high barrier packaging materials, silver nanoparticles as potent antimicrobial agents, and nanosensors and nanomaterial-based assays for the detection of food-relevant analytes (gasses, small organic molecules and food-borne pathogens). In addition to covering the technical aspects of these topics, the current commercial status and understanding of health implications of these technologies are also discussed. These applications were chosen because they do not involve direct addition of nanoparticles to consumed foods, and thus are more likely to be marketed to the public in the short term.

Applications of nanotechnology in food packaging and food safety: Barrier materials, antimicrobials and sensors

"Nanoantibiotics": a new paradigm for treating infectious diseases using nanomaterials in the antibiotics resistant era.

As the field of nanomedicine emerges, there is a lag in research surrounding the topic of nanoparticle (NP) toxicity, particularly concerned with mechanisms of action. The continuous emergence of bacterial resistance has challenged the research community to develop novel antibiotic agents. Metal NPs are among the most promising of these because show strong antibacterial activity. This review summarizes and discusses proposed mechanisms of antibacterial action of different metal NPs. These mechanisms of bacterial killing include the production of reactive oxygen species, cation release, biomolecule damages, ATP depletion, and membrane interaction. Finally, a comprehensive analysis of the effects of NPs on the regulation of genes and proteins (transcriptomic and proteomic) profiles is discussed.

https://link.springer.com/content/pdf/10.1186/s12951-017-0308-z.pdf

Metal nanoparticles: understanding the mechanisms behind antibacterial activity.

Oxidative stress induced by reactive oxygen species (ROS) is one of the most important antibacterial mechanisms of engineered nanoparticles (NPs). To elucidate the ROS generation mechanisms, we investigated the ROS production kinetics of seven selected metal-oxide NPs and their bulk counterparts under UV irradiation (365 nm). The results show that different metal oxides had distinct photogenerated ROS kinetics. Particularly, TiO2 nanoparticles and ZnO nanoparticles generated three types of ROS (superoxide radical, hydroxyl radical, and singlet oxygen), whereas other metal oxides generated only one or two types or did not generate any type of ROS. Moreover, NPs yielded more ROS than their bulk counterparts likely due to larger surface areas of NPs providing more absorption sites for UV irradiation. The ROS generation mechanism was elucidated by comparing the electronic structures (i.e., band edge energy levels) of the metal oxides with the redox potentials of various ROS generation, which correctly interpr...

Mechanism of Photogenerated Reactive Oxygen Species and Correlation with the Antibacterial Properties of Engineered Metal-Oxide Nanoparticles

Nanoparticles (NPs) of copper oxide (CuO), zinc oxide (ZnO) and especially nanosilver are intentionally used to fight the undesirable growth of bacteria, fungi and algae. Release of these NPs from consumer and household products into waste streams and further into the environment may, however, pose threat to the ‘non-target’ organisms, such as natural microbes and aquatic organisms. This review summarizes the recent research on (eco)toxicity of silver (Ag), CuO and ZnO NPs. Organism-wise it focuses on key test species used for the analysis of ecotoxicological hazard. For comparison, the toxic effects of studied NPs toward mammalian cells in vitro were addressed. Altogether 317 L(E)C50 or minimal inhibitory concentrations (MIC) values were obtained for algae, crustaceans, fish, bacteria, yeast, nematodes, protozoa and mammalian cell lines. As a rule, crustaceans, algae and fish proved most sensitive to the studied NPs. The median L(E)C50 values of Ag NPs, CuO NPs and ZnO NPs (mg/L) were 0.01, 2.1 and 2.3 for crustaceans; 0.36, 2.8 and 0.08 for algae; and 1.36, 100 and 3.0 for fish, respectively. Surprisingly, the NPs were less toxic to bacteria than to aquatic organisms: the median MIC values for bacteria were 7.1, 200 and 500 mg/L for Ag, CuO and ZnO NPs, respectively. In comparison, the respective median L(E)C50 values for mammalian cells were 11.3, 25 and 43 mg/L. Thus, the toxic range of all the three metal-containing NPs to target- and non-target organisms overlaps, indicating that the leaching of biocidal NPs from consumer products should be addressed.

https://link.springer.com/content/pdf/10.1007%2Fs00204-013-1079-4.pdf

Toxicity of Ag, CuO and ZnO nanoparticles to selected environmentally relevant test organisms and mammalian cells in vitro: a critical review

Characterisation of copper oxide nanoparticles for antimicrobial applications

Antimicrobial activity of nanoparticulate metal oxides against peri-implantitis pathogens.

With the rapidly advancing field of nanotechnology having an impact in several areas interfacing life and physical sciences, the potential applications of nanoparticles as antimicrobial agents have been realized and offer great opportunities in addressing several viral and bacterial outbreak issues. Polyurethanes (PUs) are a diverse class of polymeric materials which also have applications in several areas of biomedical science ranging from blood contact devices to implantable dental technologies. In this report, copper oxide (CuO) nanoparticles (mean size ∼50 nm) are embedded into a PU matrix via two electrical fabrication processes. To elucidate the antimicrobial activity, a range of different loading compositions of CuO within the PU matrix (0%, 1%, 5%, and 10% w/w) are electrospun to form thin porous films (thickness < 10 μm). After washing, the films are tested for their antimicrobial properties against methicillin-resistant Staphylococcus aureus (MRSA). Significant reduction of populations was demonstrated with 10% w/w CuO over a 4-h period. This approach demonstrates the potential of generating tailored antimicrobial structures for a host of applications, such as designer filters, patterned coatings, breathable fabrics, adhesive films (as opposed to sutures), and mechanically supporting structures.

Antimicrobial Properties of Electrically Formed Elastomeric Polyurethane–Copper Oxide Nanocomposites for Medical and Dental Applications

Nano-sized titanium containing hydroxyaptite has been prepared, the particle size of nanoTiHA was shown to be 12–20 nm in width and 30–40 nm in length, smaller than that of nanoHA. X-ray diffraction analysis revealed the phase purity of nanoTiHA produced. Antimicrobical assays demonstrated that nanoTiHA has excellent growth inhibitory properties, and is able to inhibit the growth of all bacterial strains tested, both Gram-negative and Gram-positive species, including multi-antibiotic resistant EMRSA 15 and EMRSA 16 ‘superbugs’. Biocidal activity against all four Staphylococcus spp was also shown at the concentration tested. Nanostuctured TiHA coating was successfully deposited onto Ti surfaces using EHDA spraying under optimized processing conditions with the thickness of the coating being further controlled by the spraying time. All of the nanoTiHA coated Ti surfaces were able to support human osteoblast (HOB) cell attachment and growth. The coating thickness did not significantly influence the proliferation of HOB cells on nanoTiHA coatings, while the ability of nanoTiHA coating to support HOB cell differentiation was demonstrated from the alkaline phosphatase activity. Our study showed that nanoTiHA has excellent anti-bacterial properties and the thin nanoTiHA coating was also able to support the attachment, growth and differentiation of HOB cells. Therefore, nanoTiHA coating could pave the way for the development of the next generation of dental and orthopedic implants by offering anti-infection potential in addition to osteoconductivity.

M. A. Vargas-Reus

Papers

Characterisation of copper oxide nanoparticles for antimicrobial applications

Antimicrobial activity of nanoparticulate metal oxides against peri-implantitis pathogens.

Antimicrobial Properties of Electrically Formed Elastomeric Polyurethane–Copper Oxide Nanocomposites for Medical and Dental Applications

Electrohydrodynamic deposition of nanotitanium doped hydroxyapatite coating for medical and dental applications.

Nanometals as Antimicrobials