다중혈관 관상동맥 환자에서 y-문합을 이용하여 양쪽 내흉동맥만을 사용한 우회술의 조기 성적

Spintronics, or spin electronics, involves the study of active control and manipulation of spin degrees of freedom in solid-state systems. This article reviews the current status of this subject, including both recent advances and well-established results. The primary focus is on the basic physical principles underlying the generation of carrier spin polarization, spin dynamics, and spin-polarized transport in semiconductors and metals. Spin transport differs from charge transport in that spin is a nonconserved quantity in solids due to spin-orbit and hyperfine coupling. The authors discuss in detail spin decoherence mechanisms in metals and semiconductors. Various theories of spin injection and spin-polarized transport are applied to hybrid structures relevant to spin-based devices and fundamental studies of materials properties. Experimental work is reviewed with the emphasis on projected applications, in which external electric and magnetic fields and illumination by light will be used to control spin and charge dynamics to create new functionalities not feasible or ineffective with conventional electronics.

/pdf/spintronics-fundamentals-and-applications-2dx38n6phu.pdf

Spintronics: Fundamentals and applications

/pdf/self-assembled-monolayers-of-thiolates-on-metals-as-a-form-1neb0hj3k4.pdf

Self-assembled monolayers of thiolates on metals as a form of nanotechnology.

The field of self-assembled monolayers (SAMs) has witnessed tremendous growth in synthetic sophistication and depth of characterization over the past 15 years.1 However, it is interesting to comment on the modest beginning and on important milestones. The field really began much earlier than is now recognized. In 1946 Zisman published the preparation of a monomolecular layer by adsorption (self-assembly) of a surfactant onto a clean metal surface.2 At that time, the potential of self-assembly was not recognized, and this publication initiated only a limited level of interest. Early work initiated in Kuhn’s laboratory at Gottingen, applying many years of experience in using chlorosilane derivative to hydrophobize glass, was followed by the more recent discovery, when Nuzzo and Allara showed that SAMs of alkanethiolates on gold can be prepared by adsorption of di-n-alkyl disulfides from dilute solutions.3 Getting away from the moisture-sensitive alkyl trichlorosilanes, as well as working with crystalline gold surfaces, were two important reasons for the success of these SAMs. Many self-assembly systems have since been investigated, but monolayers of alkanethiolates on gold are probably the most studied SAMs to date. The formation of monolayers by self-assembly of surfactant molecules at surfaces is one example of the general phenomena of self-assembly. In nature, self-assembly results in supermolecular hierarchical organizations of interlocking components that provides very complex systems.4 SAMs offer unique opportunities to increase fundamental understanding of self-organization, structure-property relationships, and interfacial phenomena. The ability to tailor both head and tail groups of the constituent molecules makes SAMs excellent systems for a more fundamental understanding of phenomena affected by competing intermolecular, molecular-substrates and molecule-solvent interactions like ordering and growth, wetting, adhesion, lubrication, and corrosion. That SAMs are well-defined and accessible makes them good model systems for studies of physical chemistry and statistical physics in two dimensions, and the crossover to three dimensions. SAMs provide the needed design flexibility, both at the individual molecular and at the material levels, and offer a vehicle for investigation of specific interactions at interfaces, and of the effect of increasing molecular complexity on the structure and stability of two-dimensional assemblies. These studies may eventually produce the design capabilities needed for assemblies of three-dimensional structures.5 However, this will require studies of more complex systems and the combination of what has been learned from SAMs with macromolecular science. The exponential growth in SAM research is a demonstration of the changes chemistry as a disciAbraham Ulman was born in Haifa, Israel, in 1946. He studied chemistry in the Bar-Ilan University in Ramat-Gan, Israel, and received his B.Sc. in 1969. He received his M.Sc. in phosphorus chemistry from Bar-Ilan University in 1971. After a brief period in industry, he moved to the Weizmann Institute in Rehovot, Israel, and received his Ph.D. in 1978 for work on heterosubstituted porphyrins. He then spent two years at Northwestern University in Evanston, IL, where his main interest was onedimensional organic conductors. In 1985 he joined the Corporate Research Laboratories of Eastman Kodak Company, in Rochester, NY, where his research interests were molecular design of materials for nonlinear optics and self-assembled monolayers. In 1994 he moved to Polytechnic University where he is the Alstadt-Lord-Mark Professor of Chemistry. His interests encompass self-assembled monolayers, surface engineering, polymers at interface, and surfaces phenomena. 1533 Chem. Rev. 1996, 96, 1533−1554

/pdf/formation-and-structure-of-self-assembled-monolayers-5eorfomxfu.pdf

Formation and Structure of Self-Assembled Monolayers.

The surface science of titanium dioxide

Spin pumping efficiency (SPE) in a ferromagnetic (FM)/Pt system relies on the effective magnetization damping of FM layer and the interface spin mixing conductance. However, there are very few studies on the influence of magnetic anisotropy of FM material on SPE. In this study, the spin pumping induced spin voltage VISHE in Fe3O4(58.9nm)/Pt(5.5nm) is investigated in two different orientations of the external magnetic field, one parallel and other perpendicular to the in-plane easy axis of Fe3O4. The value of VISHE with the magnetic field along the easy axis is 38% higher compared with that along the hard axis. The possible origin of this enhancement is investigated based on the model of ferromagnetic resonance induced spin pumping.

Influence of Magnetic Anisotropy on Inverse Spin Hall Voltage

http://absimage.aps.org/image/MAR09/MWS_MAR09-2008-007286.pdf

Ferromagnetism in MgO by Nitrogen Doping

It is shown that a better understanding of the geometry of adsorbed bisulfate species on the surface is gained by monitoring simultaneously more than one vibrational mode of the molecule. We propose that in the double layer region the bisulfate ions are adsorbed via an oxygen atom of its SO3 unit with the Pt-O-S linkage along the surface normal. In the oxide region the bisulfate ions are adsorbed on the oxygen covered surface of the platinum electrode via the hydrogen atom by hydrogen bonding with the hydrogen bond showing a significant tilt (approximately 60° ).

Mahesh G. Samant

Papers

Influence of Magnetic Anisotropy on Inverse Spin Hall Voltage

Ferromagnetism in MgO by Nitrogen Doping

In situ FTIR Study of the Adsorption Geometry of Bisulfate Accepted Ions on a Platinum Electrode.

In situ Surface Extended X-Ray Absorption Fine Structure Spectroscopy of a Lead Monolayer at a Silver(111) Electrode/Electrolyte Interface.

Electrolyte Gate Induced Metallization of Several Facets (101, 001, 110 and 100) of Rutile TiO2 and (001) SrTiO3